Makefile 76 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280
  1. # SPDX-License-Identifier: GPL-2.0+
  2. VERSION = 2021
  3. PATCHLEVEL = 04
  4. SUBLEVEL =
  5. EXTRAVERSION = -rc1
  6. NAME =
  7. # *DOCUMENTATION*
  8. # To see a list of typical targets execute "make help"
  9. # More info can be located in ./README
  10. # Comments in this file are targeted only to the developer, do not
  11. # expect to learn how to build the kernel reading this file.
  12. # o Do not use make's built-in rules and variables
  13. # (this increases performance and avoids hard-to-debug behaviour);
  14. # o Look for make include files relative to root of kernel src
  15. MAKEFLAGS += -rR --include-dir=$(CURDIR)
  16. # Determine host architecture
  17. include include/host_arch.h
  18. MK_ARCH="${shell uname -m}"
  19. unexport HOST_ARCH
  20. ifeq ("x86_64", $(MK_ARCH))
  21. export HOST_ARCH=$(HOST_ARCH_X86_64)
  22. else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
  23. export HOST_ARCH=$(HOST_ARCH_X86)
  24. else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
  25. export HOST_ARCH=$(HOST_ARCH_AARCH64)
  26. else ifeq ("armv7l", $(MK_ARCH))
  27. export HOST_ARCH=$(HOST_ARCH_ARM)
  28. else ifeq ("riscv32", $(MK_ARCH))
  29. export HOST_ARCH=$(HOST_ARCH_RISCV32)
  30. else ifeq ("riscv64", $(MK_ARCH))
  31. export HOST_ARCH=$(HOST_ARCH_RISCV64)
  32. endif
  33. undefine MK_ARCH
  34. # Avoid funny character set dependencies
  35. unexport LC_ALL
  36. LC_COLLATE=C
  37. LC_NUMERIC=C
  38. export LC_COLLATE LC_NUMERIC
  39. # Avoid interference with shell env settings
  40. unexport GREP_OPTIONS
  41. # We are using a recursive build, so we need to do a little thinking
  42. # to get the ordering right.
  43. #
  44. # Most importantly: sub-Makefiles should only ever modify files in
  45. # their own directory. If in some directory we have a dependency on
  46. # a file in another dir (which doesn't happen often, but it's often
  47. # unavoidable when linking the built-in.o targets which finally
  48. # turn into vmlinux), we will call a sub make in that other dir, and
  49. # after that we are sure that everything which is in that other dir
  50. # is now up to date.
  51. #
  52. # The only cases where we need to modify files which have global
  53. # effects are thus separated out and done before the recursive
  54. # descending is started. They are now explicitly listed as the
  55. # prepare rule.
  56. # Beautify output
  57. # ---------------------------------------------------------------------------
  58. #
  59. # Normally, we echo the whole command before executing it. By making
  60. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  61. # $(quiet) to choose other forms of output instead, e.g.
  62. #
  63. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  64. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  65. #
  66. # If $(quiet) is empty, the whole command will be printed.
  67. # If it is set to "quiet_", only the short version will be printed.
  68. # If it is set to "silent_", nothing will be printed at all, since
  69. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  70. #
  71. # A simple variant is to prefix commands with $(Q) - that's useful
  72. # for commands that shall be hidden in non-verbose mode.
  73. #
  74. # $(Q)ln $@ :<
  75. #
  76. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  77. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  78. #
  79. # To put more focus on warnings, be less verbose as default
  80. # Use 'make V=1' to see the full commands
  81. ifeq ("$(origin V)", "command line")
  82. KBUILD_VERBOSE = $(V)
  83. endif
  84. ifndef KBUILD_VERBOSE
  85. KBUILD_VERBOSE = 0
  86. endif
  87. ifeq ($(KBUILD_VERBOSE),1)
  88. quiet =
  89. Q =
  90. else
  91. quiet=quiet_
  92. Q = @
  93. endif
  94. # If the user is running make -s (silent mode), suppress echoing of
  95. # commands
  96. ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
  97. ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  98. quiet=silent_
  99. endif
  100. else # make-3.8x
  101. ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  102. quiet=silent_
  103. endif
  104. endif
  105. export quiet Q KBUILD_VERBOSE
  106. # kbuild supports saving output files in a separate directory.
  107. # To locate output files in a separate directory two syntaxes are supported.
  108. # In both cases the working directory must be the root of the kernel src.
  109. # 1) O=
  110. # Use "make O=dir/to/store/output/files/"
  111. #
  112. # 2) Set KBUILD_OUTPUT
  113. # Set the environment variable KBUILD_OUTPUT to point to the directory
  114. # where the output files shall be placed.
  115. # export KBUILD_OUTPUT=dir/to/store/output/files/
  116. # make
  117. #
  118. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  119. # variable.
  120. # KBUILD_SRC is set on invocation of make in OBJ directory
  121. # KBUILD_SRC is not intended to be used by the regular user (for now)
  122. ifeq ($(KBUILD_SRC),)
  123. # OK, Make called in directory where kernel src resides
  124. # Do we want to locate output files in a separate directory?
  125. ifeq ("$(origin O)", "command line")
  126. KBUILD_OUTPUT := $(O)
  127. endif
  128. # That's our default target when none is given on the command line
  129. PHONY := _all
  130. _all:
  131. # Cancel implicit rules on top Makefile
  132. $(CURDIR)/Makefile Makefile: ;
  133. ifneq ($(KBUILD_OUTPUT),)
  134. # Invoke a second make in the output directory, passing relevant variables
  135. # check that the output directory actually exists
  136. saved-output := $(KBUILD_OUTPUT)
  137. KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
  138. && /bin/pwd)
  139. $(if $(KBUILD_OUTPUT),, \
  140. $(error failed to create output directory "$(saved-output)"))
  141. PHONY += $(MAKECMDGOALS) sub-make
  142. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  143. @:
  144. sub-make: FORCE
  145. $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
  146. -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
  147. # Leave processing to above invocation of make
  148. skip-makefile := 1
  149. endif # ifneq ($(KBUILD_OUTPUT),)
  150. endif # ifeq ($(KBUILD_SRC),)
  151. # We process the rest of the Makefile if this is the final invocation of make
  152. ifeq ($(skip-makefile),)
  153. # Do not print "Entering directory ...",
  154. # but we want to display it when entering to the output directory
  155. # so that IDEs/editors are able to understand relative filenames.
  156. MAKEFLAGS += --no-print-directory
  157. # Call a source code checker (by default, "sparse") as part of the
  158. # C compilation.
  159. #
  160. # Use 'make C=1' to enable checking of only re-compiled files.
  161. # Use 'make C=2' to enable checking of *all* source files, regardless
  162. # of whether they are re-compiled or not.
  163. #
  164. # See the file "doc/sparse.txt" for more details, including
  165. # where to get the "sparse" utility.
  166. ifeq ("$(origin C)", "command line")
  167. KBUILD_CHECKSRC = $(C)
  168. endif
  169. ifndef KBUILD_CHECKSRC
  170. KBUILD_CHECKSRC = 0
  171. endif
  172. # Use make M=dir to specify directory of external module to build
  173. # Old syntax make ... SUBDIRS=$PWD is still supported
  174. # Setting the environment variable KBUILD_EXTMOD take precedence
  175. ifdef SUBDIRS
  176. KBUILD_EXTMOD ?= $(SUBDIRS)
  177. endif
  178. ifeq ("$(origin M)", "command line")
  179. KBUILD_EXTMOD := $(M)
  180. endif
  181. # If building an external module we do not care about the all: rule
  182. # but instead _all depend on modules
  183. PHONY += all
  184. ifeq ($(KBUILD_EXTMOD),)
  185. _all: all
  186. else
  187. _all: modules
  188. endif
  189. ifeq ($(KBUILD_SRC),)
  190. # building in the source tree
  191. srctree := .
  192. else
  193. ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
  194. # building in a subdirectory of the source tree
  195. srctree := ..
  196. else
  197. srctree := $(KBUILD_SRC)
  198. endif
  199. endif
  200. objtree := .
  201. src := $(srctree)
  202. obj := $(objtree)
  203. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  204. export srctree objtree VPATH
  205. # Make sure CDPATH settings don't interfere
  206. unexport CDPATH
  207. #########################################################################
  208. HOSTARCH := $(shell uname -m | \
  209. sed -e s/i.86/x86/ \
  210. -e s/sun4u/sparc64/ \
  211. -e s/arm.*/arm/ \
  212. -e s/sa110/arm/ \
  213. -e s/ppc64/powerpc/ \
  214. -e s/ppc/powerpc/ \
  215. -e s/macppc/powerpc/\
  216. -e s/sh.*/sh/)
  217. HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  218. sed -e 's/\(cygwin\).*/cygwin/')
  219. export HOSTARCH HOSTOS
  220. #########################################################################
  221. # set default to nothing for native builds
  222. ifeq ($(HOSTARCH),$(ARCH))
  223. CROSS_COMPILE ?=
  224. endif
  225. KCONFIG_CONFIG ?= .config
  226. export KCONFIG_CONFIG
  227. # SHELL used by kbuild
  228. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  229. else if [ -x /bin/bash ]; then echo /bin/bash; \
  230. else echo sh; fi ; fi)
  231. HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
  232. HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
  233. HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
  234. HOSTCC = cc
  235. HOSTCXX = c++
  236. KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
  237. $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
  238. KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
  239. KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
  240. KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
  241. # With the move to GCC 6, we have implicitly upgraded our language
  242. # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
  243. # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
  244. # have older compilers as their default, so we make it explicit for
  245. # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
  246. CSTD_FLAG := -std=gnu11
  247. ifeq ($(HOSTOS),linux)
  248. KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
  249. endif
  250. ifeq ($(HOSTOS),cygwin)
  251. KBUILD_HOSTCFLAGS += -ansi
  252. endif
  253. # Mac OS X / Darwin's C preprocessor is Apple specific. It
  254. # generates numerous errors and warnings. We want to bypass it
  255. # and use GNU C's cpp. To do this we pass the -traditional-cpp
  256. # option to the compiler. Note that the -traditional-cpp flag
  257. # DOES NOT have the same semantics as GNU C's flag, all it does
  258. # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
  259. #
  260. # Apple's linker is similar, thanks to the new 2 stage linking
  261. # multiple symbol definitions are treated as errors, hence the
  262. # -multiply_defined suppress option to turn off this error.
  263. #
  264. ifeq ($(HOSTOS),darwin)
  265. # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
  266. DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
  267. DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
  268. os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
  269. $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  270. os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
  271. $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  272. # Snow Leopards build environment has no longer restrictions as described above
  273. HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
  274. KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
  275. KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
  276. # since Lion (10.7) ASLR is on by default, but we use linker generated lists
  277. # in some host tools which is a problem then ... so disable ASLR for these
  278. # tools
  279. KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
  280. # macOS Mojave (10.14.X)
  281. # Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
  282. KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
  283. endif
  284. # Decide whether to build built-in, modular, or both.
  285. # Normally, just do built-in.
  286. KBUILD_MODULES :=
  287. KBUILD_BUILTIN := 1
  288. # If we have only "make modules", don't compile built-in objects.
  289. # When we're building modules with modversions, we need to consider
  290. # the built-in objects during the descend as well, in order to
  291. # make sure the checksums are up to date before we record them.
  292. ifeq ($(MAKECMDGOALS),modules)
  293. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  294. endif
  295. # If we have "make <whatever> modules", compile modules
  296. # in addition to whatever we do anyway.
  297. # Just "make" or "make all" shall build modules as well
  298. # U-Boot does not need modules
  299. #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  300. # KBUILD_MODULES := 1
  301. #endif
  302. #ifeq ($(MAKECMDGOALS),)
  303. # KBUILD_MODULES := 1
  304. #endif
  305. # Check ths size of a binary:
  306. # Args:
  307. # $1: File to check
  308. # #2: Size limit in bytes (decimal or 0xhex)
  309. define size_check
  310. actual=$$( wc -c $1 | awk '{print $$1}'); \
  311. limit=$$( printf "%d" $2 ); \
  312. if test $$actual -gt $$limit; then \
  313. echo "$1 exceeds file size limit:" >&2; \
  314. echo " limit: $$(printf %#x $$limit) bytes" >&2; \
  315. echo " actual: $$(printf %#x $$actual) bytes" >&2; \
  316. echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
  317. exit 1; \
  318. fi
  319. endef
  320. export size_check
  321. export KBUILD_MODULES KBUILD_BUILTIN
  322. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  323. # We need some generic definitions (do not try to remake the file).
  324. scripts/Kbuild.include: ;
  325. include scripts/Kbuild.include
  326. # Make variables (CC, etc...)
  327. AS = $(CROSS_COMPILE)as
  328. # Always use GNU ld
  329. ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
  330. LD = $(CROSS_COMPILE)ld.bfd
  331. else
  332. LD = $(CROSS_COMPILE)ld
  333. endif
  334. CC = $(CROSS_COMPILE)gcc
  335. CPP = $(CC) -E
  336. AR = $(CROSS_COMPILE)ar
  337. NM = $(CROSS_COMPILE)nm
  338. LDR = $(CROSS_COMPILE)ldr
  339. STRIP = $(CROSS_COMPILE)strip
  340. OBJCOPY = $(CROSS_COMPILE)objcopy
  341. OBJDUMP = $(CROSS_COMPILE)objdump
  342. LEX = flex
  343. YACC = bison
  344. AWK = awk
  345. PERL = perl
  346. PYTHON ?= python
  347. PYTHON2 = python2
  348. PYTHON3 = python3
  349. DTC ?= $(objtree)/scripts/dtc/dtc
  350. CHECK = sparse
  351. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  352. -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
  353. KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
  354. KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
  355. -Wno-format-security \
  356. -fno-builtin -ffreestanding $(CSTD_FLAG)
  357. KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
  358. KBUILD_AFLAGS := -D__ASSEMBLY__
  359. KBUILD_LDFLAGS :=
  360. ifeq ($(cc-name),clang)
  361. ifneq ($(CROSS_COMPILE),)
  362. CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
  363. GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
  364. CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
  365. GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
  366. endif
  367. ifneq ($(GCC_TOOLCHAIN),)
  368. CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
  369. endif
  370. KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  371. KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  372. KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
  373. KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
  374. endif
  375. # Don't generate position independent code
  376. KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
  377. KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
  378. # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
  379. UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
  380. UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  381. export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
  382. export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
  383. export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
  384. export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
  385. export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
  386. export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
  387. export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
  388. export KBUILD_CFLAGS KBUILD_AFLAGS
  389. export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
  390. # When compiling out-of-tree modules, put MODVERDIR in the module
  391. # tree rather than in the kernel tree. The kernel tree might
  392. # even be read-only.
  393. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  394. # Files to ignore in find ... statements
  395. export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
  396. -name CVS -o -name .pc -o -name .hg -o -name .git \) \
  397. -prune -o
  398. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
  399. --exclude CVS --exclude .pc --exclude .hg --exclude .git
  400. # ===========================================================================
  401. # Rules shared between *config targets and build targets
  402. # Basic helpers built in scripts/
  403. PHONY += scripts_basic
  404. scripts_basic:
  405. $(Q)$(MAKE) $(build)=scripts/basic
  406. $(Q)rm -f .tmp_quiet_recordmcount
  407. # To avoid any implicit rule to kick in, define an empty command.
  408. scripts/basic/%: scripts_basic ;
  409. PHONY += outputmakefile
  410. # outputmakefile generates a Makefile in the output directory, if using a
  411. # separate output directory. This allows convenient use of make in the
  412. # output directory.
  413. outputmakefile:
  414. ifneq ($(KBUILD_SRC),)
  415. $(Q)ln -fsn $(srctree) source
  416. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
  417. $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
  418. endif
  419. # To make sure we do not include .config for any of the *config targets
  420. # catch them early, and hand them over to scripts/kconfig/Makefile
  421. # It is allowed to specify more targets when calling make, including
  422. # mixing *config targets and build targets.
  423. # For example 'make oldconfig all'.
  424. # Detect when mixed targets is specified, and make a second invocation
  425. # of make so .config is not included in this case either (for *config).
  426. version_h := include/generated/version_autogenerated.h
  427. timestamp_h := include/generated/timestamp_autogenerated.h
  428. defaultenv_h := include/generated/defaultenv_autogenerated.h
  429. dt_h := include/generated/dt.h
  430. no-dot-config-targets := clean clobber mrproper distclean \
  431. help %docs check% coccicheck \
  432. ubootversion backup tests check qcheck tcheck
  433. config-targets := 0
  434. mixed-targets := 0
  435. dot-config := 1
  436. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  437. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  438. dot-config := 0
  439. endif
  440. endif
  441. ifeq ($(KBUILD_EXTMOD),)
  442. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  443. config-targets := 1
  444. ifneq ($(words $(MAKECMDGOALS)),1)
  445. mixed-targets := 1
  446. endif
  447. endif
  448. endif
  449. ifeq ($(mixed-targets),1)
  450. # ===========================================================================
  451. # We're called with mixed targets (*config and build targets).
  452. # Handle them one by one.
  453. PHONY += $(MAKECMDGOALS) __build_one_by_one
  454. $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
  455. @:
  456. __build_one_by_one:
  457. $(Q)set -e; \
  458. for i in $(MAKECMDGOALS); do \
  459. $(MAKE) -f $(srctree)/Makefile $$i; \
  460. done
  461. else
  462. ifeq ($(config-targets),1)
  463. # ===========================================================================
  464. # *config targets only - make sure prerequisites are updated, and descend
  465. # in scripts/kconfig to make the *config target
  466. KBUILD_DEFCONFIG := sandbox_defconfig
  467. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  468. config: scripts_basic outputmakefile FORCE
  469. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  470. %config: scripts_basic outputmakefile FORCE
  471. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  472. else
  473. # ===========================================================================
  474. # Build targets only - this includes vmlinux, arch specific targets, clean
  475. # targets and others. In general all targets except *config targets.
  476. # Additional helpers built in scripts/
  477. # Carefully list dependencies so we do not try to build scripts twice
  478. # in parallel
  479. PHONY += scripts
  480. scripts: scripts_basic include/config/auto.conf
  481. $(Q)$(MAKE) $(build)=$(@)
  482. ifeq ($(dot-config),1)
  483. # Read in config
  484. -include include/config/auto.conf
  485. # Read in dependencies to all Kconfig* files, make sure to run
  486. # oldconfig if changes are detected.
  487. -include include/config/auto.conf.cmd
  488. # To avoid any implicit rule to kick in, define an empty command
  489. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  490. # If .config is newer than include/config/auto.conf, someone tinkered
  491. # with it and forgot to run make oldconfig.
  492. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  493. # we execute the config step to be sure to catch updated Kconfig files
  494. include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  495. $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
  496. @# If the following part fails, include/config/auto.conf should be
  497. @# deleted so "make silentoldconfig" will be re-run on the next build.
  498. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
  499. { rm -f include/config/auto.conf; false; }
  500. @# include/config.h has been updated after "make silentoldconfig".
  501. @# We need to touch include/config/auto.conf so it gets newer
  502. @# than include/config.h.
  503. @# Otherwise, 'make silentoldconfig' would be invoked twice.
  504. $(Q)touch include/config/auto.conf
  505. u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
  506. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
  507. -include include/autoconf.mk
  508. -include include/autoconf.mk.dep
  509. # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
  510. # is up-to-date. When we switch to a different board configuration, old CONFIG
  511. # macros are still remaining in include/config/auto.conf. Without the following
  512. # gimmick, wrong config.mk would be included leading nasty warnings/errors.
  513. ifneq ($(wildcard $(KCONFIG_CONFIG)),)
  514. ifneq ($(wildcard include/config/auto.conf),)
  515. autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
  516. include/config/auto.conf)
  517. ifeq ($(autoconf_is_old),)
  518. include config.mk
  519. include arch/$(ARCH)/Makefile
  520. endif
  521. endif
  522. endif
  523. # These are set by the arch-specific config.mk. Make sure they are exported
  524. # so they can be used when building an EFI application.
  525. export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
  526. export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
  527. export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
  528. export CFLAGS_EFI # Compiler flags to add when building EFI app
  529. export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
  530. export EFI_TARGET # binutils target if EFI is natively supported
  531. # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
  532. # that (or fail if absent). Otherwise, search for a linker script in a
  533. # standard location.
  534. ifndef LDSCRIPT
  535. #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
  536. ifdef CONFIG_SYS_LDSCRIPT
  537. # need to strip off double quotes
  538. LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
  539. endif
  540. endif
  541. # If there is no specified link script, we look in a number of places for it
  542. ifndef LDSCRIPT
  543. ifeq ($(wildcard $(LDSCRIPT)),)
  544. LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
  545. endif
  546. ifeq ($(wildcard $(LDSCRIPT)),)
  547. LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
  548. endif
  549. ifeq ($(wildcard $(LDSCRIPT)),)
  550. LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
  551. endif
  552. endif
  553. else
  554. # Dummy target needed, because used as prerequisite
  555. include/config/auto.conf: ;
  556. endif # $(dot-config)
  557. #
  558. # Xtensa linker script cannot be preprocessed with -ansi because of
  559. # preprocessor operations on strings that don't make C identifiers.
  560. #
  561. ifeq ($(CONFIG_XTENSA),)
  562. LDPPFLAGS += -ansi
  563. endif
  564. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  565. KBUILD_CFLAGS += -Os
  566. else
  567. KBUILD_CFLAGS += -O2
  568. endif
  569. KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
  570. KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
  571. # disable stringop warnings in gcc 8+
  572. KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
  573. # Enabled with W=2, disabled by default as noisy
  574. KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
  575. # change __FILE__ to the relative path from the srctree
  576. KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
  577. KBUILD_CFLAGS += -g
  578. # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
  579. # option to the assembler.
  580. KBUILD_AFLAGS += -g
  581. # Report stack usage if supported
  582. # ARC tools based on GCC 7.1 has an issue with stack usage
  583. # with naked functions, see commit message for more details
  584. ifndef CONFIG_ARC
  585. ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
  586. KBUILD_CFLAGS += -fstack-usage
  587. endif
  588. endif
  589. KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
  590. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  591. ifeq ($(cc-name),clang)
  592. KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
  593. KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
  594. KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
  595. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  596. # Quiet clang warning: comparison of unsigned expression < 0 is always false
  597. KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
  598. # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
  599. # source of a reference will be _MergedGlobals and not on of the whitelisted names.
  600. # See modpost pattern 2
  601. KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
  602. KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
  603. else
  604. # These warnings generated too much noise in a regular build.
  605. # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
  606. KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
  607. endif
  608. # Prohibit date/time macros, which would make the build non-deterministic
  609. KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
  610. include scripts/Makefile.extrawarn
  611. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  612. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  613. KBUILD_AFLAGS += $(KAFLAGS)
  614. KBUILD_CFLAGS += $(KCFLAGS)
  615. KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
  616. # Use UBOOTINCLUDE when you must reference the include/ directory.
  617. # Needed to be compatible with the O= option
  618. UBOOTINCLUDE := \
  619. -Iinclude \
  620. $(if $(KBUILD_SRC), -I$(srctree)/include) \
  621. $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
  622. $(if $(CONFIG_HAS_THUMB2), \
  623. $(if $(CONFIG_CPU_V7M), \
  624. -I$(srctree)/arch/arm/thumb1/include), \
  625. -I$(srctree)/arch/arm/thumb1/include)) \
  626. -I$(srctree)/arch/$(ARCH)/include \
  627. -include $(srctree)/include/linux/kconfig.h
  628. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  629. # FIX ME
  630. cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  631. $(NOSTDINC_FLAGS)
  632. c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
  633. #########################################################################
  634. # U-Boot objects....order is important (i.e. start must be first)
  635. HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  636. libs-y += lib/
  637. libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  638. libs-$(CONFIG_OF_EMBED) += dts/
  639. libs-y += fs/
  640. libs-y += net/
  641. libs-y += disk/
  642. libs-y += drivers/
  643. libs-y += drivers/dma/
  644. libs-y += drivers/gpio/
  645. libs-y += drivers/i2c/
  646. libs-y += drivers/net/
  647. libs-y += drivers/net/phy/
  648. libs-y += drivers/power/ \
  649. drivers/power/domain/ \
  650. drivers/power/fuel_gauge/ \
  651. drivers/power/mfd/ \
  652. drivers/power/pmic/ \
  653. drivers/power/battery/ \
  654. drivers/power/regulator/
  655. libs-y += drivers/spi/
  656. libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
  657. libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
  658. libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
  659. libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
  660. libs-y += drivers/serial/
  661. libs-y += drivers/usb/cdns3/
  662. libs-y += drivers/usb/dwc3/
  663. libs-y += drivers/usb/common/
  664. libs-y += drivers/usb/emul/
  665. libs-y += drivers/usb/eth/
  666. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
  667. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
  668. libs-y += drivers/usb/host/
  669. libs-y += drivers/usb/mtu3/
  670. libs-y += drivers/usb/musb/
  671. libs-y += drivers/usb/musb-new/
  672. libs-y += drivers/usb/phy/
  673. libs-y += drivers/usb/ulpi/
  674. libs-y += cmd/
  675. libs-y += common/
  676. libs-y += env/
  677. libs-$(CONFIG_API) += api/
  678. ifdef CONFIG_POST
  679. libs-y += post/
  680. endif
  681. libs-$(CONFIG_UNIT_TEST) += test/
  682. libs-$(CONFIG_UT_ENV) += test/env/
  683. libs-$(CONFIG_UT_OPTEE) += test/optee/
  684. libs-$(CONFIG_UT_OVERLAY) += test/overlay/
  685. libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  686. libs-y := $(sort $(libs-y))
  687. u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
  688. u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
  689. libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  690. u-boot-init := $(head-y)
  691. u-boot-main := $(libs-y)
  692. # Add GCC lib
  693. ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  694. PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  695. else
  696. PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
  697. endif
  698. PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  699. ifdef CONFIG_CC_COVERAGE
  700. KBUILD_CFLAGS += --coverage
  701. PLATFORM_LIBGCC += -lgcov
  702. endif
  703. export PLATFORM_LIBS
  704. export PLATFORM_LIBGCC
  705. # Special flags for CPP when processing the linker script.
  706. # Pass the version down so we can handle backwards compatibility
  707. # on the fly.
  708. LDPPFLAGS += \
  709. -include $(srctree)/include/u-boot/u-boot.lds.h \
  710. -DCPUDIR=$(CPUDIR) \
  711. $(shell $(LD) --version | \
  712. sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
  713. #########################################################################
  714. #########################################################################
  715. ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
  716. BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
  717. else
  718. BOARD_SIZE_CHECK =
  719. endif
  720. ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
  721. SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
  722. else
  723. SPL_SIZE_CHECK =
  724. endif
  725. ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
  726. TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
  727. else
  728. TPL_SIZE_CHECK =
  729. endif
  730. # Statically apply RELA-style relocations (currently arm64 only)
  731. # This is useful for arm64 where static relocation needs to be performed on
  732. # the raw binary, but certain simulators only accept an ELF file (but don't
  733. # do the relocation).
  734. ifneq ($(CONFIG_STATIC_RELA),)
  735. # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
  736. quiet_cmd_static_rela = RELOC $@
  737. cmd_static_rela = \
  738. start=$$($(NM) $(2) | grep __rel_dyn_start | cut -f 1 -d ' '); \
  739. end=$$($(NM) $(2) | grep __rel_dyn_end | cut -f 1 -d ' '); \
  740. tools/relocate-rela $(3) $(4) $$start $$end
  741. else
  742. quiet_cmd_static_rela =
  743. cmd_static_rela =
  744. endif
  745. # Always append INPUTS so that arch config.mk's can add custom ones
  746. INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
  747. INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
  748. ifeq ($(CONFIG_SPL_FSL_PBL),y)
  749. INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
  750. else
  751. ifneq ($(CONFIG_NXP_ESBC), y)
  752. # For Secure Boot The Image needs to be signed and Header must also
  753. # be included. So The image has to be built explicitly
  754. INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
  755. endif
  756. endif
  757. INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
  758. ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
  759. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  760. else
  761. ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
  762. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  763. else
  764. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
  765. endif
  766. endif
  767. INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
  768. INPUTS-$(CONFIG_OF_SEPARATE) += u-boot.dtb
  769. ifeq ($(CONFIG_SPL_FRAMEWORK),y)
  770. INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
  771. endif
  772. INPUTS-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
  773. ifneq ($(CONFIG_SPL_TARGET),)
  774. INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
  775. endif
  776. INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
  777. INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
  778. INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
  779. # Generate this input file for binman
  780. ifeq ($(CONFIG_SPL),)
  781. INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
  782. endif
  783. # Add optional build target if defined in board/cpu/soc headers
  784. ifneq ($(CONFIG_BUILD_TARGET),)
  785. INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
  786. endif
  787. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  788. INPUTS-y += init_sp_bss_offset_check
  789. endif
  790. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  791. INPUTS-y += u-boot-with-dtb.bin
  792. endif
  793. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  794. # On ARM64 this target is produced by binman so we don't need this dep
  795. ifeq ($(CONFIG_ARM64),y)
  796. ifeq ($(CONFIG_SPL),y)
  797. # TODO: Get binman to generate this too
  798. INPUTS-y += u-boot-rockchip.bin
  799. endif
  800. else
  801. ifeq ($(CONFIG_SPL),y)
  802. # Generate these inputs for binman which will create the output files
  803. INPUTS-y += idbloader.img u-boot.img
  804. endif
  805. endif
  806. endif
  807. INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
  808. $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
  809. $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
  810. LDFLAGS_u-boot += $(LDFLAGS_FINAL)
  811. # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
  812. LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
  813. ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
  814. LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
  815. endif
  816. # insure the checker run with the right endianness
  817. CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
  818. # the checker needs the correct machine size
  819. CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
  820. # Normally we fill empty space with 0xff
  821. quiet_cmd_objcopy = OBJCOPY $@
  822. cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
  823. $(OBJCOPYFLAGS_$(@F)) $< $@
  824. # Provide a version which does not do this, for use by EFI
  825. quiet_cmd_zobjcopy = OBJCOPY $@
  826. cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
  827. quiet_cmd_efipayload = OBJCOPY $@
  828. cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
  829. MKIMAGEOUTPUT ?= /dev/null
  830. quiet_cmd_mkimage = MKIMAGE $@
  831. cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
  832. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  833. quiet_cmd_mkfitimage = MKIMAGE $@
  834. cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
  835. -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
  836. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  837. quiet_cmd_cat = CAT $@
  838. cmd_cat = cat $(filter-out $(PHONY), $^) > $@
  839. append = cat $(filter-out $< $(PHONY), $^) >> $@
  840. quiet_cmd_pad_cat = CAT $@
  841. cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
  842. quiet_cmd_lzma = LZMA $@
  843. cmd_lzma = lzma -c -z -k -9 $< > $@
  844. cfg: u-boot.cfg
  845. quiet_cmd_cfgcheck = CFGCHK $2
  846. cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
  847. $(srctree)/scripts/config_whitelist.txt $(srctree)
  848. PHONY += inputs
  849. inputs: $(INPUTS-y)
  850. all: .binman_stamp inputs
  851. ifeq ($(CONFIG_BINMAN),y)
  852. $(call if_changed,binman)
  853. endif
  854. # Timestamp file to make sure that binman always runs
  855. .binman_stamp: FORCE
  856. @touch $@
  857. ifeq ($(CONFIG_DEPRECATED),y)
  858. $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
  859. ifeq ($(CONFIG_SPI),y)
  860. ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
  861. $(warning "The relevant config item with associated code will remove in v2019.07 release.")
  862. endif
  863. endif
  864. endif
  865. ifneq ($(CONFIG_DM),y)
  866. @echo >&2 "===================== WARNING ======================"
  867. @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
  868. @echo >&2 "compulsory starting with the v2020.01 release."
  869. @echo >&2 "Failure to update may result in board removal."
  870. @echo >&2 "See doc/driver-model/migration.rst for more info."
  871. @echo >&2 "===================================================="
  872. endif
  873. ifeq ($(CONFIG_MMC),y)
  874. ifneq ($(CONFIG_DM_MMC)$(CONFIG_BLK),yy)
  875. @echo >&2 "===================== WARNING ======================"
  876. @echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
  877. @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
  878. @echo >&2 "Failure to update by the deadline may result in board removal."
  879. @echo >&2 "See doc/driver-model/migration.rst for more info."
  880. @echo >&2 "===================================================="
  881. endif
  882. endif
  883. ifeq ($(CONFIG_USB),y)
  884. ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
  885. @echo >&2 "===================== WARNING ======================"
  886. @echo >&2 "This board does not use CONFIG_DM_USB. Please update"
  887. @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
  888. @echo >&2 "Failure to update by the deadline may result in board removal."
  889. @echo >&2 "See doc/driver-model/migration.rst for more info."
  890. @echo >&2 "===================================================="
  891. endif
  892. endif
  893. ifeq ($(CONFIG_MVSATA_IDE),y)
  894. @echo >&2 "===================== WARNING ======================"
  895. @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
  896. @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
  897. @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
  898. @echo >&2 "release."
  899. @echo >&2 "Failure to update by the deadline may result in board removal."
  900. @echo >&2 "See doc/driver-model/migration.rst for more info."
  901. @echo >&2 "===================================================="
  902. endif
  903. ifeq ($(CONFIG_LIBATA),y)
  904. ifneq ($(CONFIG_AHCI),y)
  905. @echo >&2 "===================== WARNING ======================"
  906. @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
  907. @echo >&2 "enabled. Please update the storage controller driver to use"
  908. @echo >&2 "CONFIG_AHCI before the v2019.07 release."
  909. @echo >&2 "Failure to update by the deadline may result in board removal."
  910. @echo >&2 "See doc/driver-model/migration.rst for more info."
  911. @echo >&2 "===================================================="
  912. endif
  913. endif
  914. ifeq ($(CONFIG_PCI),y)
  915. ifneq ($(CONFIG_DM_PCI),y)
  916. @echo >&2 "===================== WARNING ======================"
  917. @echo >&2 "This board does not use CONFIG_DM_PCI Please update"
  918. @echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
  919. @echo >&2 "Failure to update by the deadline may result in board removal."
  920. @echo >&2 "See doc/driver-model/migration.rst for more info."
  921. @echo >&2 "===================================================="
  922. endif
  923. endif
  924. ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
  925. ifneq ($(CONFIG_DM_VIDEO),y)
  926. @echo >&2 "===================== WARNING ======================"
  927. @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
  928. @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
  929. @echo >&2 "Failure to update by the deadline may result in board removal."
  930. @echo >&2 "See doc/driver-model/migration.rst for more info."
  931. @echo >&2 "===================================================="
  932. endif
  933. endif
  934. ifeq ($(CONFIG_OF_EMBED),y)
  935. @echo >&2 "===================== WARNING ======================"
  936. @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
  937. @echo >&2 "be used for debugging purposes. Please use"
  938. @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
  939. @echo >&2 "See doc/README.fdt-control for more info."
  940. @echo >&2 "===================================================="
  941. endif
  942. ifeq ($(CONFIG_SPI_FLASH),y)
  943. ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
  944. @echo >&2 "===================== WARNING ======================"
  945. @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
  946. @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
  947. @echo >&2 "Failure to update by the deadline may result in board removal."
  948. @echo >&2 "See doc/driver-model/migration.rst for more info."
  949. @echo >&2 "===================================================="
  950. endif
  951. endif
  952. ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),)
  953. ifneq ($(CONFIG_WDT),y)
  954. @echo >&2 "===================== WARNING ======================"
  955. @echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)."
  956. @echo >&2 "Please update the board to use CONFIG_WDT before the"
  957. @echo >&2 "v2019.10 release."
  958. @echo >&2 "Failure to update by the deadline may result in board removal."
  959. @echo >&2 "See doc/driver-model/migration.rst for more info."
  960. @echo >&2 "===================================================="
  961. endif
  962. endif
  963. ifneq ($(CONFIG_NET),)
  964. ifneq ($(CONFIG_DM_ETH),y)
  965. @echo >&2 "===================== WARNING ======================"
  966. @echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model"
  967. @echo >&2 "for Ethernet drivers). Please update the board to use"
  968. @echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to"
  969. @echo >&2 "update by the deadline may result in board removal."
  970. @echo >&2 "See doc/driver-model/migration.rst for more info."
  971. @echo >&2 "===================================================="
  972. endif
  973. endif
  974. ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
  975. @echo >&2 "===================== WARNING ======================"
  976. @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
  977. @echo >&2 "to binman instead, to avoid the proliferation of"
  978. @echo >&2 "arch-specific scripts with no tests."
  979. @echo >&2 "===================================================="
  980. endif
  981. @# Check that this build does not use CONFIG options that we do not
  982. @# know about unless they are in Kconfig. All the existing CONFIG
  983. @# options are whitelisted, so new ones should not be added.
  984. $(call cmd,cfgcheck,u-boot.cfg)
  985. PHONY += dtbs
  986. dtbs: dts/dt.dtb
  987. @:
  988. dts/dt.dtb: u-boot
  989. $(Q)$(MAKE) $(build)=dts dtbs
  990. quiet_cmd_copy = COPY $@
  991. cmd_copy = cp $< $@
  992. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  993. ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
  994. FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
  995. else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
  996. FINAL_DTB_CONTAINER = fit-dtb.blob.gz
  997. else
  998. FINAL_DTB_CONTAINER = fit-dtb.blob
  999. endif
  1000. fit-dtb.blob.gz: fit-dtb.blob
  1001. @gzip -kf9 $< > $@
  1002. fit-dtb.blob.lzo: fit-dtb.blob
  1003. @lzop -f9 $< > $@
  1004. fit-dtb.blob: dts/dt.dtb FORCE
  1005. $(call if_changed,mkimage)
  1006. ifneq ($(SOURCE_DATE_EPOCH),)
  1007. touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
  1008. chmod 0600 fit-dtb.blob
  1009. endif
  1010. MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  1011. -a 0 -e 0 -E \
  1012. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
  1013. ifneq ($(EXT_DTB),)
  1014. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
  1015. $(call if_changed,cat)
  1016. else
  1017. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
  1018. $(call if_changed,cat)
  1019. endif
  1020. u-boot.bin: u-boot-fit-dtb.bin FORCE
  1021. $(call if_changed,copy)
  1022. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  1023. $(call if_changed,cat)
  1024. else ifeq ($(CONFIG_OF_SEPARATE),y)
  1025. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  1026. $(call if_changed,cat)
  1027. u-boot.bin: u-boot-dtb.bin FORCE
  1028. $(call if_changed,copy)
  1029. else
  1030. u-boot.bin: u-boot-nodtb.bin FORCE
  1031. $(call if_changed,copy)
  1032. endif
  1033. # we call Makefile in arch/arm/mach-imx which
  1034. # has targets which are dependent on targets defined
  1035. # here. make could not resolve them and we must ensure
  1036. # that they are finished before calling imx targets
  1037. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  1038. IMX_DEPS = u-boot-fit-dtb.bin
  1039. endif
  1040. %.imx: $(IMX_DEPS) %.bin
  1041. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1042. $(BOARD_SIZE_CHECK)
  1043. %.vyb: %.imx
  1044. $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
  1045. quiet_cmd_copy = COPY $@
  1046. cmd_copy = cp $< $@
  1047. u-boot.dtb: dts/dt.dtb
  1048. $(call cmd,copy)
  1049. OBJCOPYFLAGS_u-boot.hex := -O ihex
  1050. OBJCOPYFLAGS_u-boot.srec := -O srec
  1051. u-boot.hex u-boot.srec: u-boot FORCE
  1052. $(call if_changed,objcopy)
  1053. OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
  1054. u-boot-elf.srec: u-boot.elf FORCE
  1055. $(call if_changed,objcopy)
  1056. OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
  1057. spl/u-boot-spl.srec: spl/u-boot-spl FORCE
  1058. $(call if_changed,objcopy)
  1059. %.scif: %.srec
  1060. $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
  1061. OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
  1062. $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
  1063. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
  1064. OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
  1065. spl/u-boot-spl.hex: spl/u-boot-spl FORCE
  1066. $(call if_changed,objcopy)
  1067. binary_size_check: u-boot-nodtb.bin FORCE
  1068. @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
  1069. map_size=$(shell cat u-boot.map | \
  1070. awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
  1071. | sed 's/0X//g' \
  1072. | bc); \
  1073. if [ "" != "$$map_size" ]; then \
  1074. if test $$map_size -ne $$file_size; then \
  1075. echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
  1076. echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
  1077. exit 1; \
  1078. fi \
  1079. fi
  1080. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  1081. ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
  1082. subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
  1083. else
  1084. subtract_sys_malloc_f_len = true
  1085. endif
  1086. # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
  1087. # so low that the DTB could probably use 90%+ of the available space, for
  1088. # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
  1089. # safe for now and tweak this later if space becomes tight.
  1090. # A rejected alternative would be to check that some absolute minimum stack
  1091. # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
  1092. # deliberately build-specific, to take account of build-to-build stack usage
  1093. # differences due to different feature sets, there is no common absolute value
  1094. # to check against.
  1095. init_sp_bss_offset_check: u-boot.dtb FORCE
  1096. @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
  1097. space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
  1098. $(subtract_sys_malloc_f_len) ; \
  1099. quarter_space=$$(($${space} / 4)) ; \
  1100. if [ $${dtb_size} -gt $${quarter_space} ]; then \
  1101. echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
  1102. echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
  1103. exit 1 ; \
  1104. fi
  1105. endif
  1106. shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
  1107. quiet_cmd_objcopy_uboot = OBJCOPY $@
  1108. ifdef cmd_static_rela
  1109. cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
  1110. else
  1111. cmd_objcopy_uboot = $(cmd_objcopy)
  1112. endif
  1113. u-boot-nodtb.bin: u-boot FORCE
  1114. $(call if_changed,objcopy_uboot)
  1115. $(BOARD_SIZE_CHECK)
  1116. u-boot.ldr: u-boot
  1117. $(CREATE_LDR_ENV)
  1118. $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
  1119. $(BOARD_SIZE_CHECK)
  1120. # binman
  1121. # ---------------------------------------------------------------------------
  1122. # Use 'make BINMAN_DEBUG=1' to enable debugging
  1123. default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
  1124. quiet_cmd_binman = BINMAN $@
  1125. cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
  1126. --toolpath $(objtree)/tools \
  1127. $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
  1128. build -u -d u-boot.dtb -O . -m --allow-missing \
  1129. -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
  1130. -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
  1131. -a atf-bl31-path=${BL31} \
  1132. -a default-dt=$(default_dt) \
  1133. -a scp-path=$(SCP) \
  1134. $(BINMAN_$(@F))
  1135. OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
  1136. OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
  1137. u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
  1138. $(call if_changed,objcopy)
  1139. #
  1140. # U-Boot entry point, needed for booting of full-blown U-Boot
  1141. # from the SPL U-Boot version.
  1142. #
  1143. ifndef CONFIG_SYS_UBOOT_START
  1144. CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
  1145. endif
  1146. # Boards with more complex image requirements can provide an .its source file
  1147. # or a generator script
  1148. # NOTE: Please do not use this. We are migrating away from Makefile rules to use
  1149. # binman instead.
  1150. ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
  1151. U_BOOT_ITS := u-boot.its
  1152. $(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
  1153. $(call if_changed,copy)
  1154. else
  1155. ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
  1156. U_BOOT_ITS := u-boot.its
  1157. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
  1158. U_BOOT_ITS_DEPS += u-boot-nodtb.bin
  1159. endif
  1160. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
  1161. U_BOOT_ITS_DEPS += u-boot
  1162. endif
  1163. $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
  1164. $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
  1165. $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
  1166. endif
  1167. endif
  1168. ifdef CONFIG_SPL_LOAD_FIT
  1169. MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  1170. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1171. -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
  1172. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
  1173. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
  1174. $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
  1175. else
  1176. MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
  1177. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1178. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1179. MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
  1180. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1181. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1182. u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
  1183. endif
  1184. MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
  1185. # Some boards have the kwbimage.cfg file written in advance, while some
  1186. # other boards generate it on the fly during the build in the build tree.
  1187. # Let's check if the file exists in the build tree first, otherwise we
  1188. # fall back to use the one in the source tree.
  1189. KWD_CONFIG_FILE = $(shell \
  1190. if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
  1191. echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1192. else \
  1193. echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1194. fi)
  1195. MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
  1196. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  1197. MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
  1198. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1199. $(if $(KEYDIR),-k $(KEYDIR))
  1200. MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1201. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
  1202. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1203. UBOOT_BIN := u-boot-with-dtb.bin
  1204. else
  1205. UBOOT_BIN := u-boot.bin
  1206. endif
  1207. MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
  1208. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1209. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1210. u-boot.bin.lzma: u-boot.bin FORCE
  1211. $(call if_changed,lzma)
  1212. u-boot-lzma.img: u-boot.bin.lzma FORCE
  1213. $(call if_changed,mkimage)
  1214. u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
  1215. $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
  1216. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1217. ,$(UBOOT_BIN)) FORCE
  1218. $(call if_changed,mkimage)
  1219. $(BOARD_SIZE_CHECK)
  1220. ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
  1221. MKIMAGEFLAGS_u-boot.itb =
  1222. else
  1223. MKIMAGEFLAGS_u-boot.itb = -E
  1224. endif
  1225. ifdef U_BOOT_ITS
  1226. u-boot.itb: u-boot-nodtb.bin \
  1227. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1228. $(U_BOOT_ITS) FORCE
  1229. $(call if_changed,mkfitimage)
  1230. $(BOARD_SIZE_CHECK)
  1231. endif
  1232. u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
  1233. $(call if_changed,mkimage)
  1234. u-boot.sha1: u-boot.bin
  1235. tools/ubsha1 u-boot.bin
  1236. u-boot.dis: u-boot
  1237. $(OBJDUMP) -d $< > $@
  1238. ifneq ($(CONFIG_SPL_PAYLOAD),)
  1239. SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
  1240. else
  1241. SPL_PAYLOAD := u-boot.bin
  1242. endif
  1243. SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
  1244. OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
  1245. --pad-to=$(CONFIG_SPL_PAD_TO)
  1246. u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
  1247. $(call if_changed,pad_cat)
  1248. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  1249. # TPL + SPL
  1250. ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
  1251. MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
  1252. tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
  1253. $(call if_changed,mkimage)
  1254. idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
  1255. $(call if_changed,cat)
  1256. else
  1257. MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
  1258. idbloader.img: spl/u-boot-spl.bin FORCE
  1259. $(call if_changed,mkimage)
  1260. endif
  1261. ifeq ($(CONFIG_ARM64),y)
  1262. OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
  1263. --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
  1264. u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
  1265. $(call if_changed,pad_cat)
  1266. endif # CONFIG_ARM64
  1267. endif # CONFIG_ARCH_ROCKCHIP
  1268. ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
  1269. MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
  1270. lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
  1271. $(call if_changed,mkimage)
  1272. OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1273. lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
  1274. $(call if_changed,objcopy)
  1275. OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1276. lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
  1277. $(call if_changed,objcopy)
  1278. lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
  1279. $(call if_changed,cat)
  1280. endif
  1281. OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
  1282. --pad-to=$(CONFIG_TPL_PAD_TO)
  1283. tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
  1284. $(call if_changed,pad_cat)
  1285. SPL: spl/u-boot-spl.bin FORCE
  1286. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1287. ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
  1288. ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
  1289. u-boot.cnt: u-boot.bin FORCE
  1290. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1291. flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
  1292. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1293. else
  1294. flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
  1295. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1296. endif
  1297. endif
  1298. u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
  1299. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1300. MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
  1301. u-boot.ubl: u-boot-with-spl.bin FORCE
  1302. $(call if_changed,mkimage)
  1303. MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
  1304. $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
  1305. -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
  1306. spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
  1307. $(call if_changed,mkimage)
  1308. OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1309. u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
  1310. $(call if_changed,pad_cat)
  1311. u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
  1312. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
  1313. u-boot.sb: u-boot.bin spl/u-boot-spl.bin
  1314. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
  1315. # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
  1316. # Both images are created using mkimage (crc etc), so that the ROM
  1317. # bootloader can check its integrity. Padding needs to be done to the
  1318. # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
  1319. # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
  1320. # The resulting image containing both U-Boot images is called u-boot.spr
  1321. MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
  1322. -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
  1323. spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
  1324. $(call if_changed,mkimage)
  1325. OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1326. --gap-fill=0xff
  1327. u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
  1328. $(call if_changed,pad_cat)
  1329. ifneq ($(CONFIG_ARCH_SOCFPGA),)
  1330. quiet_cmd_gensplx4 = GENSPLX4 $@
  1331. cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
  1332. --pad-to=$(CONFIG_SPL_PAD_TO) \
  1333. spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
  1334. cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1335. spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
  1336. spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
  1337. $(call if_changed,gensplx4)
  1338. quiet_cmd_socboot = SOCBOOT $@
  1339. cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
  1340. u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
  1341. $(call if_changed,socboot)
  1342. quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
  1343. cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
  1344. cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1345. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1346. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1347. spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
  1348. { rm -f $@ spl/u-boot-spl.pad; false; }
  1349. u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
  1350. $(call if_changed,gensplpadx4)
  1351. quiet_cmd_socnandboot = SOCNANDBOOT $@
  1352. cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
  1353. u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
  1354. $(call if_changed,socnandboot)
  1355. endif
  1356. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1357. u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
  1358. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
  1359. $(call if_changed,binman)
  1360. ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
  1361. OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
  1362. u-boot-br.bin: u-boot FORCE
  1363. $(call if_changed,objcopy)
  1364. endif
  1365. endif
  1366. quiet_cmd_ldr = LD $@
  1367. cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
  1368. $(filter-out FORCE,$^) -o $@
  1369. ifdef CONFIG_X86
  1370. OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
  1371. u-boot-x86-start16.bin: u-boot FORCE
  1372. $(call if_changed,objcopy)
  1373. OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
  1374. u-boot-x86-reset16.bin: u-boot FORCE
  1375. $(call if_changed,objcopy)
  1376. endif # CONFIG_X86
  1377. OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
  1378. u-boot-app.efi: u-boot FORCE
  1379. $(call if_changed,zobjcopy)
  1380. u-boot.bin.o: u-boot.bin FORCE
  1381. $(call if_changed,efipayload)
  1382. u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
  1383. $(call if_changed_dep,cpp_lds)
  1384. # Rule to link the EFI payload which contains a stub and a U-Boot binary
  1385. quiet_cmd_u-boot_payload ?= LD $@
  1386. cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
  1387. -T u-boot-payload.lds arch/x86/cpu/call32.o \
  1388. lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
  1389. $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
  1390. u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
  1391. $(call if_changed,u-boot_payload)
  1392. OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
  1393. u-boot-payload.efi: u-boot-payload FORCE
  1394. $(call if_changed,zobjcopy)
  1395. u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
  1396. $(call if_changed,cat)
  1397. #Add a target to create boot binary having SPL binary in PBI format
  1398. #concatenated with u-boot binary. It is need by PowerPC SoC having
  1399. #internal SRAM <= 512KB.
  1400. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1401. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
  1402. -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
  1403. spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
  1404. $(call if_changed,mkimage)
  1405. ifeq ($(ARCH),arm)
  1406. UBOOT_BINLOAD := u-boot.img
  1407. else
  1408. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1409. UBOOT_BINLOAD := u-boot-with-dtb.bin
  1410. else
  1411. UBOOT_BINLOAD := u-boot.bin
  1412. endif
  1413. endif
  1414. OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1415. --gap-fill=0xff
  1416. u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
  1417. $(call if_changed,pad_cat)
  1418. # PPC4xx needs the SPL at the end of the image, since the reset vector
  1419. # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
  1420. # and need to introduce a new build target with the full blown U-Boot
  1421. # at the start padded up to the start of the SPL image. And then concat
  1422. # the SPL image to the end.
  1423. OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
  1424. --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
  1425. u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
  1426. $(call if_changed,pad_cat)
  1427. quiet_cmd_u-boot-elf ?= LD $@
  1428. cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
  1429. -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
  1430. -Ttext=$(CONFIG_SYS_TEXT_BASE)
  1431. u-boot.elf: u-boot.bin u-boot-elf.lds
  1432. $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
  1433. $(call if_changed,u-boot-elf)
  1434. u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
  1435. $(call if_changed_dep,cpp_lds)
  1436. # MediaTek's ARM-based u-boot needs a header to contains its load address
  1437. # which is parsed by the BootROM.
  1438. # If the SPL build is enabled, the header will be added to the spl binary,
  1439. # and the spl binary and the u-boot.img will be combined into one file.
  1440. # Otherwise the header will be added to the u-boot.bin directly.
  1441. ifeq ($(CONFIG_SPL),y)
  1442. spl/u-boot-spl-mtk.bin: spl/u-boot-spl
  1443. else
  1444. MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
  1445. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1446. -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
  1447. u-boot-mtk.bin: u-boot.bin FORCE
  1448. $(call if_changed,mkimage)
  1449. endif
  1450. quiet_cmd_endian_swap = SWAP $@
  1451. cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
  1452. u-boot-swap.bin: u-boot.bin FORCE
  1453. $(call if_changed,endian_swap)
  1454. ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
  1455. # Rule to link u-boot
  1456. # May be overridden by arch/$(ARCH)/config.mk
  1457. quiet_cmd_u-boot__ ?= LD $@
  1458. cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
  1459. -T u-boot.lds $(u-boot-init) \
  1460. --start-group $(u-boot-main) --end-group \
  1461. $(PLATFORM_LIBS) -Map u-boot.map; \
  1462. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1463. quiet_cmd_smap = GEN common/system_map.o
  1464. cmd_smap = \
  1465. smap=`$(call SYSTEM_MAP,u-boot) | \
  1466. awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  1467. $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
  1468. -c $(srctree)/common/system_map.c -o common/system_map.o
  1469. u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
  1470. +$(call if_changed,u-boot__)
  1471. ifeq ($(CONFIG_KALLSYMS),y)
  1472. $(call cmd,smap)
  1473. $(call cmd,u-boot__) common/system_map.o
  1474. endif
  1475. ifeq ($(CONFIG_RISCV),y)
  1476. @tools/prelink-riscv $@ 0
  1477. endif
  1478. quiet_cmd_sym ?= SYM $@
  1479. cmd_sym ?= $(OBJDUMP) -t $< > $@
  1480. u-boot.sym: u-boot FORCE
  1481. $(call if_changed,sym)
  1482. # The actual objects are generated when descending,
  1483. # make sure no implicit rule kicks in
  1484. $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
  1485. # Handle descending into subdirectories listed in $(u-boot-dirs)
  1486. # Preset locale variables to speed up the build process. Limit locale
  1487. # tweaks to this spot to avoid wrong language settings when running
  1488. # make menuconfig etc.
  1489. # Error messages still appears in the original language
  1490. PHONY += $(u-boot-dirs)
  1491. $(u-boot-dirs): prepare scripts
  1492. $(Q)$(MAKE) $(build)=$@
  1493. tools: prepare
  1494. # The "tools" are needed early
  1495. $(filter-out tools, $(u-boot-dirs)): tools
  1496. # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
  1497. # is "yes"), so compile examples after U-Boot is compiled.
  1498. examples: $(filter-out examples, $(u-boot-dirs))
  1499. define filechk_uboot.release
  1500. echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1501. endef
  1502. # Store (new) UBOOTRELEASE string in include/config/uboot.release
  1503. include/config/uboot.release: include/config/auto.conf FORCE
  1504. $(call filechk,uboot.release)
  1505. # Things we need to do before we recursively start building the kernel
  1506. # or the modules are listed in "prepare".
  1507. # A multi level approach is used. prepareN is processed before prepareN-1.
  1508. # archprepare is used in arch Makefiles and when processed asm symlink,
  1509. # version.h and scripts_basic is processed / created.
  1510. # Listed in dependency order
  1511. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  1512. # prepare3 is used to check if we are building in a separate output directory,
  1513. # and if so do:
  1514. # 1) Check that make has not been executed in the kernel src $(srctree)
  1515. prepare3: include/config/uboot.release
  1516. ifneq ($(KBUILD_SRC),)
  1517. @$(kecho) ' Using $(srctree) as source for U-Boot'
  1518. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  1519. echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
  1520. echo >&2 " in the '$(srctree)' directory.";\
  1521. /bin/false; \
  1522. fi;
  1523. endif
  1524. # prepare2 creates a makefile if using a separate output directory
  1525. prepare2: prepare3 outputmakefile cfg
  1526. prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \
  1527. include/config/auto.conf
  1528. ifeq ($(wildcard $(LDSCRIPT)),)
  1529. @echo >&2 " Could not find linker script."
  1530. @/bin/false
  1531. endif
  1532. ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
  1533. prepare1: $(defaultenv_h)
  1534. endif
  1535. archprepare: prepare1 scripts_basic
  1536. prepare0: archprepare FORCE
  1537. $(Q)$(MAKE) $(build)=.
  1538. # All the preparing..
  1539. prepare: prepare0
  1540. # Generate some files
  1541. # ---------------------------------------------------------------------------
  1542. define filechk_version.h
  1543. (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
  1544. echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
  1545. echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
  1546. echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
  1547. endef
  1548. # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
  1549. # The BSD date on the other hand behaves different and would produce errors
  1550. # with the misused '-d' switch. Respect that and search a working date with
  1551. # well known pre- and suffixes for the GNU variant of date.
  1552. define filechk_timestamp.h
  1553. (if test -n "$${SOURCE_DATE_EPOCH}"; then \
  1554. SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
  1555. DATE=""; \
  1556. for date in gdate date.gnu date; do \
  1557. $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
  1558. done; \
  1559. if test -n "$${DATE}"; then \
  1560. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1561. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
  1562. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
  1563. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1564. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1565. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
  1566. else \
  1567. return 42; \
  1568. fi; \
  1569. else \
  1570. LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1571. LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
  1572. LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
  1573. LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1574. LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1575. LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
  1576. fi)
  1577. endef
  1578. define filechk_defaultenv.h
  1579. (grep -v '^#' | \
  1580. grep -v '^$$' | \
  1581. tr '\n' '\0' | \
  1582. sed -e 's/\\\x0\s*//g' | \
  1583. xxd -i ; echo ", 0x00" ; )
  1584. endef
  1585. define filechk_dt.h
  1586. (if test -n "$${DEVICE_TREE}"; then \
  1587. echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
  1588. else \
  1589. echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
  1590. fi)
  1591. endef
  1592. $(version_h): include/config/uboot.release FORCE
  1593. $(call filechk,version.h)
  1594. $(timestamp_h): $(srctree)/Makefile FORCE
  1595. $(call filechk,timestamp.h)
  1596. $(dt_h): $(srctree)/Makefile FORCE
  1597. $(call filechk,dt.h)
  1598. $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
  1599. $(call filechk,defaultenv.h)
  1600. # ---------------------------------------------------------------------------
  1601. quiet_cmd_cpp_lds = LDS $@
  1602. cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
  1603. -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
  1604. u-boot.lds: $(LDSCRIPT) prepare FORCE
  1605. $(call if_changed_dep,cpp_lds)
  1606. spl/u-boot-spl.bin: spl/u-boot-spl
  1607. @:
  1608. $(SPL_SIZE_CHECK)
  1609. spl/u-boot-spl: tools prepare \
  1610. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
  1611. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
  1612. $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
  1613. spl/sunxi-spl.bin: spl/u-boot-spl
  1614. @:
  1615. spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
  1616. @:
  1617. spl/u-boot-spl.sfp: spl/u-boot-spl
  1618. @:
  1619. spl/boot.bin: spl/u-boot-spl
  1620. @:
  1621. tpl/u-boot-tpl.bin: tools prepare \
  1622. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
  1623. $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
  1624. $(TPL_SIZE_CHECK)
  1625. TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
  1626. FIND := find
  1627. FINDFLAGS := -L
  1628. tags ctags:
  1629. ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1630. -name '*.[chS]' -print`
  1631. ln -s ctags tags
  1632. etags:
  1633. etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1634. -name '*.[chS]' -print`
  1635. cscope:
  1636. $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
  1637. cscope.files
  1638. @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
  1639. grep -xvf - cscope.files > cscope.files.no-symlinks; \
  1640. mv cscope.files.no-symlinks cscope.files
  1641. cscope -b -q -k
  1642. SYSTEM_MAP = \
  1643. $(NM) $1 | \
  1644. grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
  1645. LC_ALL=C sort
  1646. System.map: u-boot
  1647. @$(call SYSTEM_MAP,$<) > $@
  1648. #########################################################################
  1649. # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
  1650. # R_AARCH64_RELATIVE (64-bit).
  1651. checkarmreloc: u-boot
  1652. @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
  1653. grep R_A | sort -u`"; \
  1654. if test "$$RELOC" != "R_ARM_RELATIVE" -a \
  1655. "$$RELOC" != "R_AARCH64_RELATIVE"; then \
  1656. echo "$< contains unexpected relocations: $$RELOC"; \
  1657. false; \
  1658. fi
  1659. tools/version.h: include/version.h
  1660. $(Q)mkdir -p $(dir $@)
  1661. $(call if_changed,copy)
  1662. envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1663. $(Q)$(MAKE) $(build)=tools/env
  1664. tools-only: export TOOLS_ONLY=y
  1665. tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1666. $(Q)$(MAKE) $(build)=tools
  1667. tools-all: export HOST_TOOLS_ALL=y
  1668. tools-all: envtools tools ;
  1669. cross_tools: export CROSS_BUILD_TOOLS=y
  1670. cross_tools: tools ;
  1671. .PHONY : CHANGELOG
  1672. CHANGELOG:
  1673. git log --no-merges U-Boot-1_1_5.. | \
  1674. unexpand -a | sed -e 's/\s\s*$$//' > $@
  1675. #########################################################################
  1676. ###
  1677. # Cleaning is done on three levels.
  1678. # make clean Delete most generated files
  1679. # Leave enough to build external modules
  1680. # make mrproper Delete the current configuration, and all generated files
  1681. # make distclean Remove editor backup files, patch leftover files and the like
  1682. # Directories & files removed with 'make clean'
  1683. CLEAN_DIRS += $(MODVERDIR) \
  1684. $(foreach d, spl tpl, $(patsubst %,$d/%, \
  1685. $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
  1686. CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
  1687. boot* u-boot* MLO* SPL System.map fit-dtb.blob* \
  1688. u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
  1689. lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
  1690. idbloader.img flash.bin flash.log defconfig
  1691. # Directories & files removed with 'make mrproper'
  1692. MRPROPER_DIRS += include/config include/generated spl tpl \
  1693. .tmp_objdiff doc/output
  1694. MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
  1695. ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
  1696. drivers/video/fonts/*.S
  1697. # clean - Delete most, but leave enough to build external modules
  1698. #
  1699. clean: rm-dirs := $(CLEAN_DIRS)
  1700. clean: rm-files := $(CLEAN_FILES)
  1701. clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
  1702. clean-dirs := $(addprefix _clean_, $(clean-dirs))
  1703. PHONY += $(clean-dirs) clean archclean
  1704. $(clean-dirs):
  1705. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1706. clean: $(clean-dirs)
  1707. $(call cmd,rmdirs)
  1708. $(call cmd,rmfiles)
  1709. @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
  1710. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1711. -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
  1712. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1713. -o -name '*.lex.c' -o -name '*.tab.[ch]' \
  1714. -o -name '*.asn1.[ch]' \
  1715. -o -name '*.symtypes' -o -name 'modules.order' \
  1716. -o -name modules.builtin -o -name '.tmp_*.o.*' \
  1717. -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
  1718. -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
  1719. -type f -print | xargs rm -f
  1720. # mrproper - Delete all generated files, including .config
  1721. #
  1722. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1723. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1724. mrproper-dirs := $(addprefix _mrproper_,scripts)
  1725. PHONY += $(mrproper-dirs) mrproper archmrproper
  1726. $(mrproper-dirs):
  1727. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1728. mrproper: clean $(mrproper-dirs)
  1729. $(call cmd,rmdirs)
  1730. $(call cmd,rmfiles)
  1731. @rm -f arch/*/include/asm/arch
  1732. # distclean
  1733. #
  1734. PHONY += distclean
  1735. distclean: mrproper
  1736. @find $(srctree) $(RCS_FIND_IGNORE) \
  1737. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1738. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1739. -o -name '.*.rej' -o -name '*%' -o -name 'core' \
  1740. -o -name '*.pyc' \) \
  1741. -type f -print | xargs rm -f
  1742. @rm -f boards.cfg CHANGELOG
  1743. backup:
  1744. F=`basename $(srctree)` ; cd .. ; \
  1745. gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
  1746. help:
  1747. @echo 'Cleaning targets:'
  1748. @echo ' clean - Remove most generated files but keep the config'
  1749. @echo ' mrproper - Remove all generated files + config + various backup files'
  1750. @echo ' distclean - mrproper + remove editor backup and patch files'
  1751. @echo ''
  1752. @echo 'Configuration targets:'
  1753. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1754. @echo ''
  1755. @echo 'Test targets:'
  1756. @echo ''
  1757. @echo ' check - Run all automated tests that use sandbox'
  1758. @echo ' qcheck - Run quick automated tests that use sandbox'
  1759. @echo ' tcheck - Run quick automated tests on tools'
  1760. @echo ''
  1761. @echo 'Other generic targets:'
  1762. @echo ' all - Build all necessary images depending on configuration'
  1763. @echo ' tests - Build U-Boot for sandbox and run tests'
  1764. @echo '* u-boot - Build the bare u-boot'
  1765. @echo ' dir/ - Build all files in dir and below'
  1766. @echo ' dir/file.[oisS] - Build specified target only'
  1767. @echo ' dir/file.lst - Build specified mixed source/assembly target only'
  1768. @echo ' (requires a recent binutils and recent build (System.map))'
  1769. @echo ' tags/ctags - Generate ctags file for editors'
  1770. @echo ' etags - Generate etags file for editors'
  1771. @echo ' cscope - Generate cscope index'
  1772. @echo ' ubootrelease - Output the release version string (use with make -s)'
  1773. @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
  1774. @echo " cfg - Don't build, just create the .cfg files"
  1775. @echo " envtools - Build only the target-side environment tools"
  1776. @echo ''
  1777. @echo 'Static analysers'
  1778. @echo ' checkstack - Generate a list of stack hogs'
  1779. @echo ' coccicheck - Execute static code analysis with Coccinelle'
  1780. @echo ''
  1781. @echo 'Documentation targets:'
  1782. @$(MAKE) -f $(srctree)/doc/Makefile dochelp
  1783. @echo ''
  1784. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1785. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1786. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1787. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1788. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1789. @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
  1790. @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
  1791. @echo ' 1: warnings which may be relevant and do not occur too often'
  1792. @echo ' 2: warnings which occur quite often but may still be relevant'
  1793. @echo ' 3: more obscure warnings, can most likely be ignored'
  1794. @echo ' Multiple levels can be combined with W=12 or W=123'
  1795. @echo ''
  1796. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1797. @echo 'For further info see the ./README file'
  1798. tests check:
  1799. $(srctree)/test/run
  1800. qcheck:
  1801. $(srctree)/test/run quick
  1802. tcheck:
  1803. $(srctree)/test/run tools
  1804. # Documentation targets
  1805. # ---------------------------------------------------------------------------
  1806. DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
  1807. linkcheckdocs dochelp refcheckdocs
  1808. PHONY += $(DOC_TARGETS)
  1809. $(DOC_TARGETS): scripts_basic FORCE
  1810. $(Q)$(MAKE) $(build)=doc $@
  1811. endif #ifeq ($(config-targets),1)
  1812. endif #ifeq ($(mixed-targets),1)
  1813. PHONY += checkstack ubootrelease ubootversion
  1814. checkstack:
  1815. $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
  1816. $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
  1817. ubootrelease:
  1818. @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1819. ubootversion:
  1820. @echo $(UBOOTVERSION)
  1821. # Single targets
  1822. # ---------------------------------------------------------------------------
  1823. # Single targets are compatible with:
  1824. # - build with mixed source and output
  1825. # - build with separate output dir 'make O=...'
  1826. # - external modules
  1827. #
  1828. # target-dir => where to store outputfile
  1829. # build-dir => directory in kernel source tree to use
  1830. ifeq ($(KBUILD_EXTMOD),)
  1831. build-dir = $(patsubst %/,%,$(dir $@))
  1832. target-dir = $(dir $@)
  1833. else
  1834. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1835. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1836. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1837. endif
  1838. %.s: %.c prepare scripts FORCE
  1839. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1840. %.i: %.c prepare scripts FORCE
  1841. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1842. %.o: %.c prepare scripts FORCE
  1843. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1844. %.lst: %.c prepare scripts FORCE
  1845. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1846. %.s: %.S prepare scripts FORCE
  1847. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1848. %.o: %.S prepare scripts FORCE
  1849. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1850. %.symtypes: %.c prepare scripts FORCE
  1851. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1852. # Modules
  1853. /: prepare scripts FORCE
  1854. $(cmd_crmodverdir)
  1855. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1856. $(build)=$(build-dir)
  1857. %/: prepare scripts FORCE
  1858. $(cmd_crmodverdir)
  1859. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1860. $(build)=$(build-dir)
  1861. %.ko: prepare scripts FORCE
  1862. $(cmd_crmodverdir)
  1863. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1864. $(build)=$(build-dir) $(@:.ko=.o)
  1865. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1866. quiet_cmd_genenv = GENENV $@
  1867. cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
  1868. sed --in-place -e 's/\x00/\x0A/g' $@
  1869. u-boot-initial-env: u-boot.bin
  1870. $(call if_changed,genenv)
  1871. # Consistency checks
  1872. # ---------------------------------------------------------------------------
  1873. PHONY += coccicheck
  1874. coccicheck:
  1875. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
  1876. # FIXME Should go into a make.lib or something
  1877. # ===========================================================================
  1878. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1879. cmd_rmdirs = rm -rf $(rm-dirs)
  1880. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1881. cmd_rmfiles = rm -f $(rm-files)
  1882. # read all saved command lines
  1883. cmd_files := $(wildcard .*.cmd $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
  1884. ifneq ($(cmd_files),)
  1885. $(cmd_files): ; # Do not try to update included dependency files
  1886. include $(cmd_files)
  1887. endif
  1888. endif # skip-makefile
  1889. PHONY += FORCE
  1890. FORCE:
  1891. # Declare the contents of the PHONY variable as phony. We keep that
  1892. # information in a variable so we can use it in if_changed and friends.
  1893. .PHONY: $(PHONY)