MPC8548CDS.h 15 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519
  1. /* SPDX-License-Identifier: GPL-2.0+ */
  2. /*
  3. * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
  4. * Copyright 2020 NXP
  5. */
  6. /*
  7. * mpc8548cds board configuration file
  8. *
  9. * Please refer to doc/README.mpc85xxcds for more info.
  10. *
  11. */
  12. #ifndef __CONFIG_H
  13. #define __CONFIG_H
  14. #define CONFIG_SYS_SRIO
  15. #define CONFIG_SRIO1 /* SRIO port 1 */
  16. #define CONFIG_PCI1 /* PCI controller 1 */
  17. #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
  18. #undef CONFIG_PCI2
  19. #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
  20. #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
  21. #define CONFIG_FSL_VIA
  22. #ifndef __ASSEMBLY__
  23. #include <linux/stringify.h>
  24. extern unsigned long get_clock_freq(void);
  25. #endif
  26. #define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */
  27. /*
  28. * These can be toggled for performance analysis, otherwise use default.
  29. */
  30. #define CONFIG_L2_CACHE /* toggle L2 cache */
  31. #define CONFIG_BTB /* toggle branch predition */
  32. /*
  33. * Only possible on E500 Version 2 or newer cores.
  34. */
  35. #define CONFIG_ENABLE_36BIT_PHYS 1
  36. #define CONFIG_SYS_CCSRBAR 0xe0000000
  37. #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
  38. /* DDR Setup */
  39. #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
  40. #define CONFIG_DDR_SPD
  41. #define CONFIG_DDR_ECC
  42. #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
  43. #define CONFIG_MEM_INIT_VALUE 0xDeadBeef
  44. #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
  45. #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
  46. #define CONFIG_DIMM_SLOTS_PER_CTLR 1
  47. #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
  48. /* I2C addresses of SPD EEPROMs */
  49. #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
  50. /* Make sure required options are set */
  51. #ifndef CONFIG_SPD_EEPROM
  52. #error ("CONFIG_SPD_EEPROM is required")
  53. #endif
  54. /*
  55. * Physical Address Map
  56. *
  57. * 32bit:
  58. * 0x0000_0000 0x7fff_ffff DDR 2G cacheable
  59. * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M cacheable
  60. * 0xa000_0000 0xbfff_ffff PCIe MEM 512M cacheable
  61. * 0xc000_0000 0xdfff_ffff RapidIO 512M cacheable
  62. * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable
  63. * 0xe200_0000 0xe20f_ffff PCI1 IO 1M non-cacheable
  64. * 0xe300_0000 0xe30f_ffff PCIe IO 1M non-cacheable
  65. * 0xf000_0000 0xf3ff_ffff SDRAM 64M cacheable
  66. * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS 1M non-cacheable
  67. * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable
  68. * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable
  69. *
  70. * 36bit:
  71. * 0x00000_0000 0x07fff_ffff DDR 2G cacheable
  72. * 0xc0000_0000 0xc1fff_ffff PCI1 MEM 512M cacheable
  73. * 0xc2000_0000 0xc3fff_ffff PCIe MEM 512M cacheable
  74. * 0xc4000_0000 0xc5fff_ffff RapidIO 512M cacheable
  75. * 0xfe000_0000 0xfe00f_ffff CCSR 1M non-cacheable
  76. * 0xfe200_0000 0xfe20f_ffff PCI1 IO 1M non-cacheable
  77. * 0xfe300_0000 0xfe30f_ffff PCIe IO 1M non-cacheable
  78. * 0xff000_0000 0xff3ff_ffff SDRAM 64M cacheable
  79. * 0xff800_0000 0xff80f_ffff NVRAM/CADMUS 1M non-cacheable
  80. * 0xfff00_0000 0xfff7f_ffff FLASH (2nd bank) 8M non-cacheable
  81. * 0xfff80_0000 0xfffff_ffff FLASH (boot bank) 8M non-cacheable
  82. *
  83. */
  84. /*
  85. * Local Bus Definitions
  86. */
  87. /*
  88. * FLASH on the Local Bus
  89. * Two banks, 8M each, using the CFI driver.
  90. * Boot from BR0/OR0 bank at 0xff00_0000
  91. * Alternate BR1/OR1 bank at 0xff80_0000
  92. *
  93. * BR0, BR1:
  94. * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
  95. * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
  96. * Port Size = 16 bits = BRx[19:20] = 10
  97. * Use GPCM = BRx[24:26] = 000
  98. * Valid = BRx[31] = 1
  99. *
  100. * 0 4 8 12 16 20 24 28
  101. * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
  102. * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
  103. *
  104. * OR0, OR1:
  105. * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
  106. * Reserved ORx[17:18] = 11, confusion here?
  107. * CSNT = ORx[20] = 1
  108. * ACS = half cycle delay = ORx[21:22] = 11
  109. * SCY = 6 = ORx[24:27] = 0110
  110. * TRLX = use relaxed timing = ORx[29] = 1
  111. * EAD = use external address latch delay = OR[31] = 1
  112. *
  113. * 0 4 8 12 16 20 24 28
  114. * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
  115. */
  116. #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */
  117. #ifdef CONFIG_PHYS_64BIT
  118. #define CONFIG_SYS_FLASH_BASE_PHYS 0xfff000000ull
  119. #else
  120. #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
  121. #endif
  122. #define CONFIG_SYS_BR0_PRELIM \
  123. (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x800000) | BR_PS_16 | BR_V)
  124. #define CONFIG_SYS_BR1_PRELIM \
  125. (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
  126. #define CONFIG_SYS_OR0_PRELIM 0xff806e65
  127. #define CONFIG_SYS_OR1_PRELIM 0xff806e65
  128. #define CONFIG_SYS_FLASH_BANKS_LIST \
  129. {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS}
  130. #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
  131. #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
  132. #undef CONFIG_SYS_FLASH_CHECKSUM
  133. #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
  134. #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
  135. #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
  136. #define CONFIG_SYS_FLASH_EMPTY_INFO
  137. #define CONFIG_HWCONFIG /* enable hwconfig */
  138. /*
  139. * SDRAM on the Local Bus
  140. */
  141. #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
  142. #ifdef CONFIG_PHYS_64BIT
  143. #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS 0xff0000000ull
  144. #else
  145. #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS CONFIG_SYS_LBC_SDRAM_BASE
  146. #endif
  147. #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
  148. /*
  149. * Base Register 2 and Option Register 2 configure SDRAM.
  150. * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  151. *
  152. * For BR2, need:
  153. * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
  154. * port-size = 32-bits = BR2[19:20] = 11
  155. * no parity checking = BR2[21:22] = 00
  156. * SDRAM for MSEL = BR2[24:26] = 011
  157. * Valid = BR[31] = 1
  158. *
  159. * 0 4 8 12 16 20 24 28
  160. * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  161. *
  162. * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  163. * FIXME: the top 17 bits of BR2.
  164. */
  165. #define CONFIG_SYS_BR2_PRELIM \
  166. (BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \
  167. | BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V)
  168. /*
  169. * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  170. *
  171. * For OR2, need:
  172. * 64MB mask for AM, OR2[0:7] = 1111 1100
  173. * XAM, OR2[17:18] = 11
  174. * 9 columns OR2[19-21] = 010
  175. * 13 rows OR2[23-25] = 100
  176. * EAD set for extra time OR[31] = 1
  177. *
  178. * 0 4 8 12 16 20 24 28
  179. * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  180. */
  181. #define CONFIG_SYS_OR2_PRELIM 0xfc006901
  182. #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
  183. #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
  184. #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
  185. #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
  186. /*
  187. * Common settings for all Local Bus SDRAM commands.
  188. * At run time, either BSMA1516 (for CPU 1.1)
  189. * or BSMA1617 (for CPU 1.0) (old)
  190. * is OR'ed in too.
  191. */
  192. #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \
  193. | LSDMR_PRETOACT7 \
  194. | LSDMR_ACTTORW7 \
  195. | LSDMR_BL8 \
  196. | LSDMR_WRC4 \
  197. | LSDMR_CL3 \
  198. | LSDMR_RFEN \
  199. )
  200. /*
  201. * The CADMUS registers are connected to CS3 on CDS.
  202. * The new memory map places CADMUS at 0xf8000000.
  203. *
  204. * For BR3, need:
  205. * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
  206. * port-size = 8-bits = BR[19:20] = 01
  207. * no parity checking = BR[21:22] = 00
  208. * GPMC for MSEL = BR[24:26] = 000
  209. * Valid = BR[31] = 1
  210. *
  211. * 0 4 8 12 16 20 24 28
  212. * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
  213. *
  214. * For OR3, need:
  215. * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
  216. * disable buffer ctrl OR[19] = 0
  217. * CSNT OR[20] = 1
  218. * ACS OR[21:22] = 11
  219. * XACS OR[23] = 1
  220. * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
  221. * SETA OR[28] = 0
  222. * TRLX OR[29] = 1
  223. * EHTR OR[30] = 1
  224. * EAD extra time OR[31] = 1
  225. *
  226. * 0 4 8 12 16 20 24 28
  227. * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
  228. */
  229. #define CONFIG_FSL_CADMUS
  230. #define CADMUS_BASE_ADDR 0xf8000000
  231. #ifdef CONFIG_PHYS_64BIT
  232. #define CADMUS_BASE_ADDR_PHYS 0xff8000000ull
  233. #else
  234. #define CADMUS_BASE_ADDR_PHYS CADMUS_BASE_ADDR
  235. #endif
  236. #define CONFIG_SYS_BR3_PRELIM \
  237. (BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V)
  238. #define CONFIG_SYS_OR3_PRELIM 0xfff00ff7
  239. #define CONFIG_SYS_INIT_RAM_LOCK 1
  240. #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
  241. #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
  242. #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  243. #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
  244. #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
  245. #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
  246. /* Serial Port */
  247. #define CONFIG_SYS_NS16550_SERIAL
  248. #define CONFIG_SYS_NS16550_REG_SIZE 1
  249. #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
  250. #define CONFIG_SYS_BAUDRATE_TABLE \
  251. {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
  252. #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
  253. #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
  254. /*
  255. * I2C
  256. */
  257. #if !CONFIG_IS_ENABLED(DM_I2C)
  258. #define CONFIG_SYS_I2C
  259. #define CONFIG_SYS_FSL_I2C_SPEED 400000
  260. #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
  261. #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
  262. #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
  263. #else
  264. #define CONFIG_SYS_SPD_BUS_NUM 0
  265. #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
  266. #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
  267. #endif
  268. #define CONFIG_SYS_I2C_FSL
  269. /* EEPROM */
  270. #define CONFIG_ID_EEPROM
  271. #define CONFIG_SYS_I2C_EEPROM_CCID
  272. #define CONFIG_SYS_ID_EEPROM
  273. #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
  274. #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
  275. /*
  276. * General PCI
  277. * Memory space is mapped 1-1, but I/O space must start from 0.
  278. */
  279. #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
  280. #ifdef CONFIG_PHYS_64BIT
  281. #define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000
  282. #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull
  283. #else
  284. #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
  285. #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
  286. #endif
  287. #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
  288. #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
  289. #define CONFIG_SYS_PCI1_IO_BUS 0x00000000
  290. #ifdef CONFIG_PHYS_64BIT
  291. #define CONFIG_SYS_PCI1_IO_PHYS 0xfe2000000ull
  292. #else
  293. #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
  294. #endif
  295. #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
  296. #ifdef CONFIG_PCIE1
  297. #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000
  298. #ifdef CONFIG_PHYS_64BIT
  299. #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc20000000ull
  300. #else
  301. #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000
  302. #endif
  303. #define CONFIG_SYS_PCIE1_IO_VIRT 0xe3000000
  304. #ifdef CONFIG_PHYS_64BIT
  305. #define CONFIG_SYS_PCIE1_IO_PHYS 0xfe3000000ull
  306. #else
  307. #define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000
  308. #endif
  309. #endif
  310. /*
  311. * RapidIO MMU
  312. */
  313. #define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000
  314. #ifdef CONFIG_PHYS_64BIT
  315. #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc40000000ull
  316. #else
  317. #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc0000000
  318. #endif
  319. #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */
  320. #ifdef CONFIG_LEGACY
  321. #define BRIDGE_ID 17
  322. #define VIA_ID 2
  323. #else
  324. #define BRIDGE_ID 28
  325. #define VIA_ID 4
  326. #endif
  327. #if defined(CONFIG_PCI)
  328. #if !defined(CONFIG_DM_PCI)
  329. #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
  330. #define CONFIG_PCI_INDIRECT_BRIDGE 1
  331. #define CONFIG_SYS_PCIE1_NAME "Slot"
  332. #ifdef CONFIG_PHYS_64BIT
  333. #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
  334. #else
  335. #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000
  336. #endif
  337. #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
  338. #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
  339. #define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */
  340. #endif
  341. #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
  342. #endif /* CONFIG_PCI */
  343. #if defined(CONFIG_TSEC_ENET)
  344. #define CONFIG_TSEC1 1
  345. #define CONFIG_TSEC1_NAME "eTSEC0"
  346. #define CONFIG_TSEC2 1
  347. #define CONFIG_TSEC2_NAME "eTSEC1"
  348. #define CONFIG_TSEC3 1
  349. #define CONFIG_TSEC3_NAME "eTSEC2"
  350. #define CONFIG_TSEC4
  351. #define CONFIG_TSEC4_NAME "eTSEC3"
  352. #undef CONFIG_MPC85XX_FEC
  353. #define TSEC1_PHY_ADDR 0
  354. #define TSEC2_PHY_ADDR 1
  355. #define TSEC3_PHY_ADDR 2
  356. #define TSEC4_PHY_ADDR 3
  357. #define TSEC1_PHYIDX 0
  358. #define TSEC2_PHYIDX 0
  359. #define TSEC3_PHYIDX 0
  360. #define TSEC4_PHYIDX 0
  361. #define TSEC1_FLAGS TSEC_GIGABIT
  362. #define TSEC2_FLAGS TSEC_GIGABIT
  363. #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
  364. #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
  365. /* Options are: eTSEC[0-3] */
  366. #define CONFIG_ETHPRIME "eTSEC0"
  367. #endif /* CONFIG_TSEC_ENET */
  368. /*
  369. * Environment
  370. */
  371. #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
  372. #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
  373. /*
  374. * BOOTP options
  375. */
  376. #define CONFIG_BOOTP_BOOTFILESIZE
  377. #undef CONFIG_WATCHDOG /* watchdog disabled */
  378. /*
  379. * Miscellaneous configurable options
  380. */
  381. #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
  382. /*
  383. * For booting Linux, the board info and command line data
  384. * have to be in the first 64 MB of memory, since this is
  385. * the maximum mapped by the Linux kernel during initialization.
  386. */
  387. #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
  388. #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
  389. #if defined(CONFIG_CMD_KGDB)
  390. #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
  391. #endif
  392. /*
  393. * Environment Configuration
  394. */
  395. #if defined(CONFIG_TSEC_ENET)
  396. #define CONFIG_HAS_ETH0
  397. #define CONFIG_HAS_ETH1
  398. #define CONFIG_HAS_ETH2
  399. #define CONFIG_HAS_ETH3
  400. #endif
  401. #define CONFIG_IPADDR 192.168.1.253
  402. #define CONFIG_HOSTNAME "unknown"
  403. #define CONFIG_ROOTPATH "/nfsroot"
  404. #define CONFIG_BOOTFILE "8548cds/uImage.uboot"
  405. #define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */
  406. #define CONFIG_SERVERIP 192.168.1.1
  407. #define CONFIG_GATEWAYIP 192.168.1.1
  408. #define CONFIG_NETMASK 255.255.255.0
  409. #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
  410. #define CONFIG_EXTRA_ENV_SETTINGS \
  411. "hwconfig=fsl_ddr:ecc=off\0" \
  412. "netdev=eth0\0" \
  413. "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
  414. "tftpflash=tftpboot $loadaddr $uboot; " \
  415. "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
  416. " +$filesize; " \
  417. "erase " __stringify(CONFIG_SYS_TEXT_BASE) \
  418. " +$filesize; " \
  419. "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
  420. " $filesize; " \
  421. "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
  422. " +$filesize; " \
  423. "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
  424. " $filesize\0" \
  425. "consoledev=ttyS1\0" \
  426. "ramdiskaddr=2000000\0" \
  427. "ramdiskfile=ramdisk.uboot\0" \
  428. "fdtaddr=1e00000\0" \
  429. "fdtfile=mpc8548cds.dtb\0"
  430. #define CONFIG_NFSBOOTCOMMAND \
  431. "setenv bootargs root=/dev/nfs rw " \
  432. "nfsroot=$serverip:$rootpath " \
  433. "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
  434. "console=$consoledev,$baudrate $othbootargs;" \
  435. "tftp $loadaddr $bootfile;" \
  436. "tftp $fdtaddr $fdtfile;" \
  437. "bootm $loadaddr - $fdtaddr"
  438. #define CONFIG_RAMBOOTCOMMAND \
  439. "setenv bootargs root=/dev/ram rw " \
  440. "console=$consoledev,$baudrate $othbootargs;" \
  441. "tftp $ramdiskaddr $ramdiskfile;" \
  442. "tftp $loadaddr $bootfile;" \
  443. "tftp $fdtaddr $fdtfile;" \
  444. "bootm $loadaddr $ramdiskaddr $fdtaddr"
  445. #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
  446. #endif /* __CONFIG_H */