Quellcode durchsuchen

Merge https://source.denx.de/u-boot/custodians/u-boot-riscv

- Watchdog, Unleashed and Icicle improvements
Tom Rini vor 3 Jahren
Ursprung
Commit
f6127db8cc

+ 81 - 3
arch/riscv/Kconfig

@@ -17,8 +17,8 @@ config TARGET_MICROCHIP_ICICLE
 config TARGET_QEMU_VIRT
 	bool "Support QEMU Virt Board"
 
-config TARGET_SIFIVE_FU540
-	bool "Support SiFive FU540 Board"
+config TARGET_SIFIVE_UNLEASHED
+	bool "Support SiFive Unleashed Board"
 
 config TARGET_SIPEED_MAIX
 	bool "Support Sipeed Maix Board"
@@ -55,7 +55,7 @@ config SPL_SYS_DCACHE_OFF
 source "board/AndesTech/ax25-ae350/Kconfig"
 source "board/emulation/qemu-riscv/Kconfig"
 source "board/microchip/mpfs_icicle/Kconfig"
-source "board/sifive/fu540/Kconfig"
+source "board/sifive/unleashed/Kconfig"
 source "board/sipeed/maix/Kconfig"
 
 # platform-specific options below
@@ -271,4 +271,82 @@ config STACK_SIZE_SHIFT
 config OF_BOARD_FIXUP
 	default y if OF_SEPARATE && RISCV_SMODE
 
+config USE_ARCH_MEMCPY
+	bool "Use an assembly optimized implementation of memcpy"
+	default y
+	help
+	  Enable the generation of an optimized version of memcpy.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config SPL_USE_ARCH_MEMCPY
+	bool "Use an assembly optimized implementation of memcpy for SPL"
+	default y if USE_ARCH_MEMCPY
+	depends on SPL
+	help
+	  Enable the generation of an optimized version of memcpy.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config TPL_USE_ARCH_MEMCPY
+	bool "Use an assembly optimized implementation of memcpy for TPL"
+	default y if USE_ARCH_MEMCPY
+	depends on TPL
+	help
+	  Enable the generation of an optimized version of memcpy.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config USE_ARCH_MEMMOVE
+	bool "Use an assembly optimized implementation of memmove"
+	default y
+	help
+	  Enable the generation of an optimized version of memmove.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config SPL_USE_ARCH_MEMMOVE
+	bool "Use an assembly optimized implementation of memmove for SPL"
+	default y if USE_ARCH_MEMCPY
+	depends on SPL
+	help
+	  Enable the generation of an optimized version of memmove.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config TPL_USE_ARCH_MEMMOVE
+	bool "Use an assembly optimized implementation of memmove for TPL"
+	default y if USE_ARCH_MEMCPY
+	depends on TPL
+	help
+	  Enable the generation of an optimized version of memmove.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config USE_ARCH_MEMSET
+	bool "Use an assembly optimized implementation of memset"
+	default y
+	help
+	  Enable the generation of an optimized version of memset.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config SPL_USE_ARCH_MEMSET
+	bool "Use an assembly optimized implementation of memset for SPL"
+	default y if USE_ARCH_MEMSET
+	depends on SPL
+	help
+	  Enable the generation of an optimized version of memset.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config TPL_USE_ARCH_MEMSET
+	bool "Use an assembly optimized implementation of memset for TPL"
+	default y if USE_ARCH_MEMSET
+	depends on TPL
+	help
+	  Enable the generation of an optimized version of memset.
+	  Such an implementation may be faster under some conditions
+	  but may increase the binary size.
+
 endmenu

+ 1 - 1
arch/riscv/dts/Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
-dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
 dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
 dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
 

+ 0 - 1
arch/riscv/dts/k210.dtsi

@@ -439,7 +439,6 @@
 				interrupts = <21>;
 				clocks = <&sysclk K210_CLK_WDT0>;
 				resets = <&sysrst K210_RST_WDT0>;
-				status = "disabled";
 			};
 
 			wdt1: watchdog@50410000 {

+ 0 - 4
arch/riscv/dts/microchip-mpfs-icicle-kit.dts

@@ -232,7 +232,6 @@
 			reg-shift = <2>;
 			interrupt-parent = <&plic>;
 			interrupts = <90>;
-			clock-frequency = <150000000>;
 			clocks = <&clkcfg CLK_MMUART0>;
 			status = "okay";
 		};
@@ -294,7 +293,6 @@
 			reg-shift = <2>;
 			interrupt-parent = <&plic>;
 			interrupts = <91>;
-			clock-frequency = <150000000>;
 			clocks = <&clkcfg CLK_MMUART1>;
 			status = "okay";
 		};
@@ -305,7 +303,6 @@
 			reg-shift = <2>;
 			interrupt-parent = <&plic>;
 			interrupts = <92>;
-			clock-frequency = <150000000>;
 			clocks = <&clkcfg CLK_MMUART2>;
 			status = "okay";
 		};
@@ -316,7 +313,6 @@
 			reg-shift = <2>;
 			interrupt-parent = <&plic>;
 			interrupts = <93>;
-			clock-frequency = <150000000>;
 			clocks = <&clkcfg CLK_MMUART3>;
 			status = "okay";
 		};

+ 15 - 21
arch/riscv/include/asm/string.h

@@ -19,31 +19,25 @@
 
 #undef __HAVE_ARCH_STRRCHR
 #undef __HAVE_ARCH_STRCHR
-#undef __HAVE_ARCH_MEMCPY
-#undef __HAVE_ARCH_MEMMOVE
 #undef __HAVE_ARCH_MEMCHR
 #undef __HAVE_ARCH_MEMZERO
-#undef __HAVE_ARCH_MEMSET
 
-#ifdef CONFIG_MARCO_MEMSET
-#define memset(_p, _v, _n)	\
-	(typeof(_p) (p) = (_p); \
-	 typeof(_v) (v) = (_v); \
-	 typeof(_n) (n) = (_n); \
-	 {								\
-		if ((n) != 0) {						\
-			if (__builtin_constant_p((v)) && (v) == 0)	\
-				__memzero((p), (n));			\
-			else						\
-				memset((p), (v), (n));			\
-		}							\
-		(p);							\
-	})
+#undef __HAVE_ARCH_MEMCPY
+#if CONFIG_IS_ENABLED(USE_ARCH_MEMCPY)
+#define __HAVE_ARCH_MEMCPY
+#endif
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMMOVE
+#if CONFIG_IS_ENABLED(USE_ARCH_MEMMOVE)
+#define __HAVE_ARCH_MEMMOVE
+#endif
+extern void *memmove(void *, const void *, __kernel_size_t);
 
-#define memzero(_p, _n) \
-	(typeof(_p) (p) = (_p); \
-	 typeof(_n) (n) = (_n); \
-	 { if ((n) != 0) __memzero((p), (n)); (p); })
+#undef __HAVE_ARCH_MEMZERO
+#if CONFIG_IS_ENABLED(USE_ARCH_MEMSET)
+#define __HAVE_ARCH_MEMSET
 #endif
+extern void *memset(void *, int, __kernel_size_t);
 
 #endif /* __ASM_RISCV_STRING_H */

+ 4 - 0
arch/riscv/lib/Makefile

@@ -36,3 +36,7 @@ CFLAGS_REMOVE_$(EFI_RELOC) := $(CFLAGS_NON_EFI)
 extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
 extra-$(CONFIG_CMD_BOOTEFI_SELFTEST) += $(EFI_CRT0) $(EFI_RELOC)
 extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC)
+
+obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
+obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o
+obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o

+ 108 - 0
arch/riscv/lib/memcpy.S

@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Regents of the University of California
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+/* void *memcpy(void *, const void *, size_t) */
+ENTRY(__memcpy)
+WEAK(memcpy)
+	move t6, a0  /* Preserve return value */
+
+	/* Defer to byte-oriented copy for small sizes */
+	sltiu a3, a2, 128
+	bnez a3, 4f
+	/* Use word-oriented copy only if low-order bits match */
+	andi a3, t6, SZREG-1
+	andi a4, a1, SZREG-1
+	bne a3, a4, 4f
+
+	beqz a3, 2f  /* Skip if already aligned */
+	/*
+	 * Round to nearest double word-aligned address
+	 * greater than or equal to start address
+	 */
+	andi a3, a1, ~(SZREG-1)
+	addi a3, a3, SZREG
+	/* Handle initial misalignment */
+	sub a4, a3, a1
+1:
+	lb a5, 0(a1)
+	addi a1, a1, 1
+	sb a5, 0(t6)
+	addi t6, t6, 1
+	bltu a1, a3, 1b
+	sub a2, a2, a4  /* Update count */
+
+2:
+	andi a4, a2, ~((16*SZREG)-1)
+	beqz a4, 4f
+	add a3, a1, a4
+3:
+	REG_L a4,       0(a1)
+	REG_L a5,   SZREG(a1)
+	REG_L a6, 2*SZREG(a1)
+	REG_L a7, 3*SZREG(a1)
+	REG_L t0, 4*SZREG(a1)
+	REG_L t1, 5*SZREG(a1)
+	REG_L t2, 6*SZREG(a1)
+	REG_L t3, 7*SZREG(a1)
+	REG_L t4, 8*SZREG(a1)
+	REG_L t5, 9*SZREG(a1)
+	REG_S a4,       0(t6)
+	REG_S a5,   SZREG(t6)
+	REG_S a6, 2*SZREG(t6)
+	REG_S a7, 3*SZREG(t6)
+	REG_S t0, 4*SZREG(t6)
+	REG_S t1, 5*SZREG(t6)
+	REG_S t2, 6*SZREG(t6)
+	REG_S t3, 7*SZREG(t6)
+	REG_S t4, 8*SZREG(t6)
+	REG_S t5, 9*SZREG(t6)
+	REG_L a4, 10*SZREG(a1)
+	REG_L a5, 11*SZREG(a1)
+	REG_L a6, 12*SZREG(a1)
+	REG_L a7, 13*SZREG(a1)
+	REG_L t0, 14*SZREG(a1)
+	REG_L t1, 15*SZREG(a1)
+	addi a1, a1, 16*SZREG
+	REG_S a4, 10*SZREG(t6)
+	REG_S a5, 11*SZREG(t6)
+	REG_S a6, 12*SZREG(t6)
+	REG_S a7, 13*SZREG(t6)
+	REG_S t0, 14*SZREG(t6)
+	REG_S t1, 15*SZREG(t6)
+	addi t6, t6, 16*SZREG
+	bltu a1, a3, 3b
+	andi a2, a2, (16*SZREG)-1  /* Update count */
+
+4:
+	/* Handle trailing misalignment */
+	beqz a2, 6f
+	add a3, a1, a2
+
+	/* Use word-oriented copy if co-aligned to word boundary */
+	or a5, a1, t6
+	or a5, a5, a3
+	andi a5, a5, 3
+	bnez a5, 5f
+7:
+	lw a4, 0(a1)
+	addi a1, a1, 4
+	sw a4, 0(t6)
+	addi t6, t6, 4
+	bltu a1, a3, 7b
+
+	ret
+
+5:
+	lb a4, 0(a1)
+	addi a1, a1, 1
+	sb a4, 0(t6)
+	addi t6, t6, 1
+	bltu a1, a3, 5b
+6:
+	ret
+END(__memcpy)

+ 64 - 0
arch/riscv/lib/memmove.S

@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+ENTRY(__memmove)
+WEAK(memmove)
+        move    t0, a0
+        move    t1, a1
+
+        beq     a0, a1, exit_memcpy
+        beqz    a2, exit_memcpy
+        srli    t2, a2, 0x2
+
+        slt     t3, a0, a1
+        beqz    t3, do_reverse
+
+        andi    a2, a2, 0x3
+        li      t4, 1
+        beqz    t2, byte_copy
+
+word_copy:
+        lw      t3, 0(a1)
+        addi    t2, t2, -1
+        addi    a1, a1, 4
+        sw      t3, 0(a0)
+        addi    a0, a0, 4
+        bnez    t2, word_copy
+        beqz    a2, exit_memcpy
+        j       byte_copy
+
+do_reverse:
+        add     a0, a0, a2
+        add     a1, a1, a2
+        andi    a2, a2, 0x3
+        li      t4, -1
+        beqz    t2, reverse_byte_copy
+
+reverse_word_copy:
+        addi    a1, a1, -4
+        addi    t2, t2, -1
+        lw      t3, 0(a1)
+        addi    a0, a0, -4
+        sw      t3, 0(a0)
+        bnez    t2, reverse_word_copy
+        beqz    a2, exit_memcpy
+
+reverse_byte_copy:
+        addi    a0, a0, -1
+        addi    a1, a1, -1
+
+byte_copy:
+        lb      t3, 0(a1)
+        addi    a2, a2, -1
+        sb      t3, 0(a0)
+        add     a1, a1, t4
+        add     a0, a0, t4
+        bnez    a2, byte_copy
+
+exit_memcpy:
+        move a0, t0
+        move a1, t1
+        ret
+END(__memmove)

+ 113 - 0
arch/riscv/lib/memset.S

@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Regents of the University of California
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+/* void *memset(void *, int, size_t) */
+ENTRY(__memset)
+WEAK(memset)
+	move t0, a0  /* Preserve return value */
+
+	/* Defer to byte-oriented fill for small sizes */
+	sltiu a3, a2, 16
+	bnez a3, 4f
+
+	/*
+	 * Round to nearest XLEN-aligned address
+	 * greater than or equal to start address
+	 */
+	addi a3, t0, SZREG-1
+	andi a3, a3, ~(SZREG-1)
+	beq a3, t0, 2f  /* Skip if already aligned */
+	/* Handle initial misalignment */
+	sub a4, a3, t0
+1:
+	sb a1, 0(t0)
+	addi t0, t0, 1
+	bltu t0, a3, 1b
+	sub a2, a2, a4  /* Update count */
+
+2: /* Duff's device with 32 XLEN stores per iteration */
+	/* Broadcast value into all bytes */
+	andi a1, a1, 0xff
+	slli a3, a1, 8
+	or a1, a3, a1
+	slli a3, a1, 16
+	or a1, a3, a1
+#ifdef CONFIG_64BIT
+	slli a3, a1, 32
+	or a1, a3, a1
+#endif
+
+	/* Calculate end address */
+	andi a4, a2, ~(SZREG-1)
+	add a3, t0, a4
+
+	andi a4, a4, 31*SZREG  /* Calculate remainder */
+	beqz a4, 3f            /* Shortcut if no remainder */
+	neg a4, a4
+	addi a4, a4, 32*SZREG  /* Calculate initial offset */
+
+	/* Adjust start address with offset */
+	sub t0, t0, a4
+
+	/* Jump into loop body */
+	/* Assumes 32-bit instruction lengths */
+	la a5, 3f
+#ifdef CONFIG_64BIT
+	srli a4, a4, 1
+#endif
+	add a5, a5, a4
+	jr a5
+3:
+	REG_S a1,        0(t0)
+	REG_S a1,    SZREG(t0)
+	REG_S a1,  2*SZREG(t0)
+	REG_S a1,  3*SZREG(t0)
+	REG_S a1,  4*SZREG(t0)
+	REG_S a1,  5*SZREG(t0)
+	REG_S a1,  6*SZREG(t0)
+	REG_S a1,  7*SZREG(t0)
+	REG_S a1,  8*SZREG(t0)
+	REG_S a1,  9*SZREG(t0)
+	REG_S a1, 10*SZREG(t0)
+	REG_S a1, 11*SZREG(t0)
+	REG_S a1, 12*SZREG(t0)
+	REG_S a1, 13*SZREG(t0)
+	REG_S a1, 14*SZREG(t0)
+	REG_S a1, 15*SZREG(t0)
+	REG_S a1, 16*SZREG(t0)
+	REG_S a1, 17*SZREG(t0)
+	REG_S a1, 18*SZREG(t0)
+	REG_S a1, 19*SZREG(t0)
+	REG_S a1, 20*SZREG(t0)
+	REG_S a1, 21*SZREG(t0)
+	REG_S a1, 22*SZREG(t0)
+	REG_S a1, 23*SZREG(t0)
+	REG_S a1, 24*SZREG(t0)
+	REG_S a1, 25*SZREG(t0)
+	REG_S a1, 26*SZREG(t0)
+	REG_S a1, 27*SZREG(t0)
+	REG_S a1, 28*SZREG(t0)
+	REG_S a1, 29*SZREG(t0)
+	REG_S a1, 30*SZREG(t0)
+	REG_S a1, 31*SZREG(t0)
+	addi t0, t0, 32*SZREG
+	bltu t0, a3, 3b
+	andi a2, a2, SZREG-1  /* Update count */
+
+4:
+	/* Handle trailing misalignment */
+	beqz a2, 6f
+	add a3, t0, a2
+5:
+	sb a1, 0(t0)
+	addi t0, t0, 1
+	bltu t0, a3, 5b
+6:
+	ret
+END(__memset)

+ 2 - 6
arch/riscv/lib/setjmp.S

@@ -54,12 +54,8 @@ ENTRY(longjmp)
 	LOAD_IDX(sp, 13)
 
 	/* Move the return value in place, but return 1 if passed 0. */
-	beq a1, zero, longjmp_1
-	mv a0, a1
-	ret
-
-	longjmp_1:
-	li a0, 1
+	seqz a0, a1
+	add a0, a0, a1
 	ret
 ENDPROC(longjmp)
 .popsection

+ 3 - 3
board/sifive/fu540/Kconfig → board/sifive/unleashed/Kconfig

@@ -1,7 +1,7 @@
-if TARGET_SIFIVE_FU540
+if TARGET_SIFIVE_UNLEASHED
 
 config SYS_BOARD
-	default "fu540"
+	default "unleashed"
 
 config SYS_VENDOR
 	default "sifive"
@@ -10,7 +10,7 @@ config SYS_CPU
 	default "fu540"
 
 config SYS_CONFIG_NAME
-	default "sifive-fu540"
+	default "sifive-unleashed"
 
 config SYS_TEXT_BASE
 	default 0x80200000 if SPL

+ 5 - 5
board/sifive/fu540/MAINTAINERS → board/sifive/unleashed/MAINTAINERS

@@ -1,10 +1,10 @@
-SiFive FU540 BOARD
+SiFive HiFive Unleashed BOARD
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Anup Patel <anup.patel@wdc.com>
 M:	Atish Patra <atish.patra@wdc.com>
 S:	Maintained
-F:	board/sifive/fu540/
-F:	doc/board/sifive/fu540.rst
-F:	include/configs/sifive-fu540.h
-F:	configs/sifive_fu540_defconfig
+F:	board/sifive/unleashed/
+F:	doc/board/sifive/unleashed.rst
+F:	include/configs/sifive-unleashed.h
+F:	configs/sifive_unleashed_defconfig

+ 1 - 1
board/sifive/fu540/Makefile → board/sifive/unleashed/Makefile

@@ -2,7 +2,7 @@
 #
 # Copyright (c) 2019 Western Digital Corporation or its affiliates.
 
-obj-y	+= fu540.o
+obj-y	+= unleashed.o
 
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o

+ 0 - 0
board/sifive/fu540/spl.c → board/sifive/unleashed/spl.c


+ 0 - 0
board/sifive/fu540/fu540.c → board/sifive/unleashed/unleashed.c


+ 2 - 0
board/sipeed/maix/Kconfig

@@ -69,4 +69,6 @@ config BOARD_SPECIFIC_OPTIONS
 	imply EFI_PARTITION
 	imply CMD_PART
 	imply CMD_FS_GENERIC
+	imply WDT
+	imply DESIGNWARE_WATCHDOG
 endif

+ 3 - 2
common/spl/Kconfig

@@ -330,7 +330,8 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 		     ARCH_MX6 || ARCH_MX7 || \
 		     ARCH_ROCKCHIP || ARCH_MVEBU ||  ARCH_SOCFPGA || \
 		     ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \
-		     OMAP44XX || OMAP54XX || AM33XX || AM43XX || TARGET_SIFIVE_FU540
+		     OMAP44XX || OMAP54XX || AM33XX || AM43XX || \
+		     TARGET_SIFIVE_UNLEASHED
 	help
 	  Use sector number for specifying U-Boot location on MMC/SD in
 	  raw mode.
@@ -347,7 +348,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
 	default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
 		         OMAP54XX || AM33XX || AM43XX || ARCH_K3
 	default 0x4000 if ARCH_ROCKCHIP
-	default 0x822 if TARGET_SIFIVE_FU540
+	default 0x822 if TARGET_SIFIVE_UNLEASHED
 	help
 	  Address on the MMC to load U-Boot from, when the MMC is being used
 	  in raw mode. Units: MMC sectors (1 sector = 512 bytes).

+ 1 - 0
configs/microchip_mpfs_icicle_defconfig

@@ -1,4 +1,5 @@
 CONFIG_RISCV=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="microchip-mpfs-icicle-kit"
 CONFIG_TARGET_MICROCHIP_ICICLE=y

+ 1 - 1
configs/sifive_fu540_defconfig → configs/sifive_unleashed_defconfig

@@ -8,7 +8,7 @@ CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
-CONFIG_TARGET_SIFIVE_FU540=y
+CONFIG_TARGET_SIFIVE_UNLEASHED=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_DISTRO_DEFAULTS=y

+ 11 - 0
configs/sipeed_maix_smode_defconfig

@@ -1,10 +1,21 @@
 CONFIG_RISCV=y
 CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0xfff000
+CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_TARGET_SIPEED_MAIX=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_STACK_SIZE=0x100000
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run k210_bootcmd"
+CONFIG_HUSH_PARSER=y
+CONFIG_MTDIDS_DEFAULT="nor0=spi3:0"
+CONFIG_MTDPARTS_DEFAULT="nor0:1M(u-boot),0x1000@0xfff000(env)"
 # CONFIG_NET is not set
 # CONFIG_INPUT is not set
+CONFIG_SF_DEFAULT_BUS=3
 # CONFIG_DM_ETH is not set
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT=y
 # CONFIG_EFI_UNICODE_CAPITALIZATION is not set

+ 1 - 1
doc/board/sifive/index.rst

@@ -6,4 +6,4 @@ SiFive
 .. toctree::
    :maxdepth: 2
 
-   fu540
+   unleashed

+ 0 - 0
doc/board/sifive/fu540.rst → doc/board/sifive/unleashed.rst


+ 1 - 0
drivers/clk/microchip/mpfs_clk.c

@@ -120,4 +120,5 @@ U_BOOT_DRIVER(mpfs_clk) = {
 	.ops = &mpfs_clk_ops,
 	.probe = mpfs_clk_probe,
 	.priv_auto = sizeof(struct clk),
+	.flags = DM_FLAG_PRE_RELOC,
 };

+ 1 - 1
drivers/ram/sifive/Kconfig

@@ -8,6 +8,6 @@ config RAM_SIFIVE
 config SIFIVE_FU540_DDR
 	bool "SiFive FU540 DDR driver"
 	depends on RAM_SIFIVE
-	default y if TARGET_SIFIVE_FU540
+	default y if TARGET_SIFIVE_UNLEASHED
 	help
 	  This enables DDR support for the platforms based on SiFive FU540 SoC.

+ 1 - 1
drivers/reset/Kconfig

@@ -166,7 +166,7 @@ config RESET_IPQ419
 
 config RESET_SIFIVE
 	bool "Reset Driver for SiFive SoC's"
-	depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_FU540
+	depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_UNLEASHED
 	default y
 	help
 	  PRCI module within SiFive SoC's provides mechanism to reset

+ 1 - 0
drivers/timer/sifive_clint_timer.c

@@ -54,6 +54,7 @@ static int sifive_clint_probe(struct udevice *dev)
 
 static const struct udevice_id sifive_clint_ids[] = {
 	{ .compatible = "riscv,clint0" },
+	{ .compatible = "sifive,clint0" },
 	{ }
 };
 

+ 24 - 13
drivers/watchdog/designware_wdt.c

@@ -9,7 +9,6 @@
 #include <reset.h>
 #include <wdt.h>
 #include <asm/io.h>
-#include <asm/utils.h>
 #include <linux/bitops.h>
 
 #define DW_WDT_CR	0x00
@@ -35,7 +34,7 @@ static int designware_wdt_settimeout(void __iomem *base, unsigned int clk_khz,
 	signed int i;
 
 	/* calculate the timeout range value */
-	i = log_2_n_round_up(timeout * clk_khz) - 16;
+	i = fls(timeout * clk_khz - 1) - 16;
 	i = clamp(i, 0, 15);
 
 	writel(i | (i << 4), base + DW_WDT_TORR);
@@ -130,27 +129,39 @@ static int designware_wdt_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
+	ret = clk_enable(&clk);
+	if (ret)
+		goto err;
+
 	priv->clk_khz = clk_get_rate(&clk) / 1000;
-	if (!priv->clk_khz)
-		return -EINVAL;
+	if (!priv->clk_khz) {
+		ret = -EINVAL;
+		goto err;
+	}
 #else
 	priv->clk_khz = CONFIG_DW_WDT_CLOCK_KHZ;
 #endif
 
-#if CONFIG_IS_ENABLED(DM_RESET)
-	struct reset_ctl_bulk resets;
+	if (CONFIG_IS_ENABLED(DM_RESET)) {
+		struct reset_ctl_bulk resets;
 
-	ret = reset_get_bulk(dev, &resets);
-	if (ret)
-		return ret;
+		ret = reset_get_bulk(dev, &resets);
+		if (ret)
+			goto err;
 
-	ret = reset_deassert_bulk(&resets);
-	if (ret)
-		return ret;
-#endif
+		ret = reset_deassert_bulk(&resets);
+		if (ret)
+			goto err;
+	}
 
 	/* reset to disable the watchdog */
 	return designware_wdt_stop(dev);
+
+err:
+#if CONFIG_IS_ENABLED(CLK)
+	clk_free(&clk);
+#endif
+	return ret;
 }
 
 static const struct wdt_ops designware_wdt_ops = {

+ 0 - 0
include/configs/sifive-fu540.h → include/configs/sifive-unleashed.h


+ 0 - 3
include/configs/sipeed-maix.h

@@ -18,9 +18,6 @@
 /* Don't relocate into AI ram since it isn't set up yet */
 #define CONFIG_SYS_SDRAM_SIZE (SZ_4M + SZ_2M)
 
-/* For early init */
-#define K210_SYSCTL_BASE 0x50440000
-
 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80060000\0" \

+ 1 - 0
test/lib/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_EFI_LOADER) += efi_device_path.o
 obj-$(CONFIG_EFI_SECURE_BOOT) += efi_image_region.o
 obj-y += hexdump.o
 obj-y += lmb.o
+obj-y += longjmp.o
 obj-$(CONFIG_CONSOLE_RECORD) += test_print.o
 obj-$(CONFIG_SSCANF) += sscanf.o
 obj-y += string.o

+ 73 - 0
test/lib/longjmp.c

@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test setjmp(), longjmp()
+ *
+ * Copyright (c) 2021, Heinrich Schuchardt <xypron.glpk@gmx.de>
+ */
+
+#include <common.h>
+#include <test/lib.h>
+#include <test/test.h>
+#include <test/ut.h>
+#include <asm/setjmp.h>
+
+struct test_jmp_buf {
+	jmp_buf env;
+	int val;
+};
+
+/**
+ * test_longjmp() - test longjmp function
+ *
+ * @i is passed to longjmp.
+ * @i << 8 is set in the environment structure.
+ *
+ * @env:	environment
+ * @i:		value passed to longjmp()
+ */
+static noinline void test_longjmp(struct test_jmp_buf *env, int i)
+{
+	env->val = i << 8;
+	longjmp(env->env, i);
+}
+
+/**
+ * test_setjmp() - test setjmp function
+ *
+ * setjmp() will return the value @i passed to longjmp() if @i is non-zero.
+ * For @i == 0 we expect return value 1.
+ *
+ * @i << 8 will be set by test_longjmp in the environment structure.
+ * This value can be used to check that the stack frame is restored.
+ *
+ * We return the XORed values to allow simply check both at once.
+ *
+ * @i:		value passed to longjmp()
+ * Return:	values return by longjmp()
+ */
+static int test_setjmp(int i)
+{
+	struct test_jmp_buf env;
+	int ret;
+
+	env.val = -1;
+	ret = setjmp(env.env);
+	if (ret)
+		return ret ^ env.val;
+	test_longjmp(&env, i);
+	/* We should not arrive here */
+	return 0x1000;
+}
+
+static int lib_test_longjmp(struct unit_test_state *uts)
+{
+	int i;
+
+	for (i = -3; i < 0; ++i)
+		ut_asserteq(i ^ (i << 8), test_setjmp(i));
+	ut_asserteq(1, test_setjmp(0));
+	for (i = 1; i < 4; ++i)
+		ut_asserteq(i ^ (i << 8), test_setjmp(i));
+	return 0;
+}
+LIB_TEST(lib_test_longjmp, 0);