Browse Source

mmc: sdhci: Fix HISPD bit handling

SDHCI HISPD bits need to be configured based on desired mmc
timings mode and some HISPD quirks.

So, handle the HISPD bit based on the mmc computed selected
mode(timing parameter) rather than fixed mmc card clock
frequency.

Linux handle the HISPD similar like this in below commit but no
SDHCI_QUIRK_BROKEN_HISPD_MODE,

commit <501639bf2173> ("mmc: sdhci: fix SDHCI_QUIRK_NO_HISPD_BIT handling")

This eventually fixed the mmc write issue observed in
rk3399 sdhci controller.

Bug log for refernece,
=> gpt write mmc 0 $partitions
Writing GPT: mmc write failed
** Can't write to device 0 **
** Can't write to device 0 **
error!

Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Peng Fan <peng.fan@nxp.com>
Peng Fan: added back "ctrl &= ~SDHCI_CTRL_HISPD;" per Jaehoon's suggestion
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> # roc-rk3399-pc
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki 4 years ago
parent
commit
f12341a952
1 changed files with 19 additions and 6 deletions
  1. 19 6
      drivers/mmc/sdhci.c

+ 19 - 6
drivers/mmc/sdhci.c

@@ -567,6 +567,7 @@ static int sdhci_set_ios(struct mmc *mmc)
 #endif
 	u32 ctrl;
 	struct sdhci_host *host = mmc->priv;
+	bool no_hispd_bit = false;
 
 	if (host->ops && host->ops->set_control_reg)
 		host->ops->set_control_reg(host);
@@ -594,14 +595,26 @@ static int sdhci_set_ios(struct mmc *mmc)
 			ctrl &= ~SDHCI_CTRL_4BITBUS;
 	}
 
-	if (mmc->clock > 26000000)
-		ctrl |= SDHCI_CTRL_HISPD;
-	else
-		ctrl &= ~SDHCI_CTRL_HISPD;
-
 	if ((host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) ||
-	    (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE))
+	    (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE)) {
 		ctrl &= ~SDHCI_CTRL_HISPD;
+		no_hispd_bit = true;
+	}
+
+	if (!no_hispd_bit) {
+		if (mmc->selected_mode == MMC_HS ||
+		    mmc->selected_mode == SD_HS ||
+		    mmc->selected_mode == MMC_DDR_52 ||
+		    mmc->selected_mode == MMC_HS_200 ||
+		    mmc->selected_mode == MMC_HS_400 ||
+		    mmc->selected_mode == UHS_SDR25 ||
+		    mmc->selected_mode == UHS_SDR50 ||
+		    mmc->selected_mode == UHS_SDR104 ||
+		    mmc->selected_mode == UHS_DDR50)
+			ctrl |= SDHCI_CTRL_HISPD;
+		else
+			ctrl &= ~SDHCI_CTRL_HISPD;
+	}
 
 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);