Bläddra i källkod

* Patch by Anders Larsen, 18 Sep 2003:
allow mkimage to build and run on Cygwin-hosted systems

* Patch by Frank Mller, 18 Sep 2003:
use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
cpu/mpc8xx/fec.c

* Patch by Pantelis Antoniou, 16 Sep 2003:
add tool to compute fileds in the PLPRCR register for MPC86x

wdenk 20 år sedan
förälder
incheckning
ef1464cc01
7 ändrade filer med 245 tillägg och 16 borttagningar
  1. 10 0
      CHANGELOG
  2. 2 2
      cpu/mpc8xx/fec.c
  3. 0 7
      include/elf.h
  4. 0 5
      include/image.h
  5. 13 0
      tools/Makefile
  6. 2 2
      tools/mkimage.c
  7. 218 0
      tools/mpc86x_clk.c

+ 10 - 0
CHANGELOG

@@ -2,6 +2,16 @@
 Changes for U-Boot 1.0.0:
 ======================================================================
 
+* Patch by Anders Larsen, 18 Sep 2003:
+  allow mkimage to build and run on Cygwin-hosted systems
+
+* Patch by Frank Müller, 18 Sep 2003:
+  use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
+  cpu/mpc8xx/fec.c
+
+* Patch by Pantelis Antoniou, 16 Sep 2003:
+  add tool to compute fileds in the PLPRCR register for MPC86x
+
 * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
 
 * Fix build problems under FreeBSD

+ 2 - 2
cpu/mpc8xx/fec.c

@@ -348,7 +348,7 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
 	 * This MDC frequency is equal to system clock / (2 * MII_SPEED).
 	 * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
 	 */
-	fecp->fec_mii_speed = ((bd->bi_busfreq + 4999999) / 5000000) << 1;
+	fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
 
 #if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
 	/* Configure all of port D for MII.
@@ -612,7 +612,7 @@ void mii_init (void)
 	 * This MDC frequency is equal to system clock / (2 * MII_SPEED).
 	 * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
 	 */
-	fecp->fec_mii_speed = ((bd->bi_busfreq + 4999999) / 5000000) << 1;
+	fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
 
 #if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
 	/* Configure all of port D for MII.

+ 0 - 7
include/elf.h

@@ -43,13 +43,6 @@
 #include <stdint.h>
 #endif
 
-#ifdef __CYGWIN__
-#include <sys/types.h>
-typedef unsigned long int uint32_t;
-typedef unsigned short    uint16_t;
-typedef unsigned char     uint8_t;
-#endif /* __CYGWIN__ */
-
 /*
  *  This version doesn't work for 64-bit ABIs - Erik.
  */

+ 0 - 5
include/image.h

@@ -124,11 +124,6 @@
 #define IH_MAGIC	0x27051956	/* Image Magic Number		*/
 #define IH_NMLEN		32	/* Image Name Length		*/
 
-#ifdef __CYGWIN__
-typedef unsigned long uint32_t;
-typedef unsigned char uint8_t;
-#endif /* __CYGWIN__ */
-
 /*
  * all data in network byte order (aka natural aka bigendian)
  */

+ 13 - 0
tools/Makefile

@@ -30,6 +30,12 @@ BINS   += inca-swap-bytes$(SFX)
 OBJS   += inca-swap-bytes.o
 endif
 
+# Don't build by default
+#ifeq ($(ARCH),ppc)
+#BINS   += mpc86x_clk$(SFX)
+#OBJS   += mpc86x_clk.o
+#endif
+
 LOGO_H	= $(TOPDIR)/include/bmp_logo.h
 
 ifeq ($(LOGO_BMP),)
@@ -136,6 +142,10 @@ inca-swap-bytes$(SFX):	inca-swap-bytes.o
 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
 		$(STRIP) $@
 
+mpc86x_clk$(SFX):	mpc86x_clk.o
+		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
+		$(STRIP) $@
+
 envcrc.o:	envcrc.c
 		$(CC) -g $(CFLAGS) -c $<
 
@@ -151,6 +161,9 @@ gen_eth_addr.o:	gen_eth_addr.c
 inca-swap-bytes.o:	inca-swap-bytes.c
 		$(CC) -g $(CFLAGS) -c $<
 
+mpc86x_clk.o:	mpc86x_clk.c
+		$(CC) -g $(CFLAGS) -c $<
+
 subdirs:
 ifeq ($(TOOLSUBDIRS),)
 		@:

+ 2 - 2
tools/mkimage.c

@@ -268,7 +268,7 @@ NXTARG:		;
 	imagefile = *argv;
 
 	if (lflag) {
-		ifd = open(imagefile, O_RDONLY);
+		ifd = open(imagefile, O_RDONLY|O_BINARY);
 	} else {
 		ifd = open(imagefile, O_RDWR|O_CREAT|O_TRUNC|O_BINARY, 0666);
 	}
@@ -502,7 +502,7 @@ copy_file (int ifd, const char *datafile, int pad)
 		fprintf (stderr, "Adding Image %s\n", datafile);
 	}
 
-	if ((dfd = open(datafile, O_RDONLY)) < 0) {
+	if ((dfd = open(datafile, O_RDONLY|O_BINARY)) < 0) {
 		fprintf (stderr, "%s: Can't open %s: %s\n",
 			cmdname, datafile, strerror(errno));
 		exit (EXIT_FAILURE);

+ 218 - 0
tools/mpc86x_clk.c

@@ -0,0 +1,218 @@
+/*
+ * (C) Copyright 2003 Intracom S.A.
+ * Pantelis Antoniou <panto@intracom.gr>
+ *
+ * This little program makes an exhaustive search for the
+ * correct terms of pdf, mfi, mfn, mfd, s, dbrmo, in PLPRCR.
+ * The goal is to produce a gclk2 from a xin input, while respecting
+ * all the restrictions on their combination.
+ *
+ * Generaly you select the first row of the produced table.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#define DPREF_MIN	 10000000
+#define DPREF_MAX	 32000000
+
+#define DPGDCK_MAX	320000000
+#define DPGDCK_MIN	160000000
+
+#define S_MIN		0
+#define S_MAX		2
+
+#define MFI_MIN		5
+#define MFI_MAX		15
+
+#define MFN_MIN		0
+#define MFN_MAX		15
+
+#define MFD_MIN		0
+#define MFD_MAX		31
+
+#define MF_MIN		5
+#define MF_MAX		15
+
+#define PDF_MIN		0
+#define PDF_MAX		15
+
+#define GCLK2_MAX	150000000
+
+static int calculate (int xin, int target_clock,
+		      int ppm, int pdf, int mfi, int mfn, int mfd, int s,
+		      int *dprefp, int *dpgdckp, int *jdbckp,
+		      int *gclk2p, int *dbrmop)
+{
+	unsigned int dpref, dpgdck, jdbck, gclk2, t1, t2, dbrmo;
+
+	/* valid MFI? */
+	if (mfi < MFI_MIN)
+		return -1;
+
+	/* valid num, denum? */
+	if (mfn > 0 && mfn >= mfd)
+		return -1;
+
+	dpref = xin / (pdf + 1);
+
+	/* valid dpef? */
+	if (dpref < DPREF_MIN || dpref > DPREF_MAX)
+		return -1;
+
+	if (mfn == 0) {
+		dpgdck  = (2 * mfi * xin) / (pdf + 1) ;
+		dbrmo = 0;
+	} else {
+		/* 5 <= mfi + (mfn / mfd + 1) <= 15 */
+		t1 = mfd + 1;
+		t2 = mfi * t1 + mfn;
+		if ( MF_MIN * t1 > t2 || MF_MAX * t1 < t2)
+			return -1;
+
+		dpgdck  = (unsigned int)(2 * (mfi * mfd + mfi + mfn) *
+				(unsigned int)xin) /
+				((mfd + 1) * (pdf + 1));
+
+		dbrmo = 10 * mfn < (mfd + 1);
+	}
+
+	/* valid dpgclk? */
+	if (dpgdck < DPGDCK_MIN || dpgdck > DPGDCK_MAX)
+		return -1;
+
+	jdbck = dpgdck >> s;
+	gclk2 = jdbck / 2;
+
+	/* valid gclk2 */
+	if (gclk2 > GCLK2_MAX)
+		return -1;
+
+	t1 = abs(gclk2 - target_clock);
+
+	/* XXX max 1MHz dev. in clock */
+	if (t1 > 1000000)
+		return -1;
+
+	/* dev within range (XXX gclk2 scaled to avoid overflow) */
+	if (t1 * 1000 > (unsigned int)ppm * (gclk2 / 1000))
+		return -1;
+
+	*dprefp = dpref;
+	*dpgdckp = dpgdck;
+	*jdbckp = jdbck;
+	*gclk2p = gclk2;
+	*dbrmop = dbrmo;
+
+	return gclk2;
+}
+
+int conf_clock(int xin, int target_clock, int ppm)
+{
+	int pdf, s, mfn, mfd, mfi;
+	int dpref, dpgdck, jdbck, gclk2, xout, dbrmo;
+	int found = 0;
+
+	/* integer multipliers */
+	for (pdf = PDF_MIN; pdf <= PDF_MAX; pdf++) {
+		for (mfi = MFI_MIN; mfi <= MFI_MAX; mfi++) {
+			for (s = 0; s <= S_MAX; s++) {
+				xout = calculate(xin, target_clock,
+						 ppm, pdf, mfi, 0, 0, s,
+						 &dpref, &dpgdck, &jdbck,
+						 &gclk2, &dbrmo);
+				if (xout < 0)
+					continue;
+
+				if (found == 0) {
+					printf("pdf mfi mfn mfd s dbrmo     dpref    dpgdck     jdbck     gclk2 exact?\n");
+					printf("--- --- --- --- - -----     -----    ------     -----     ----- ------\n");
+				}
+
+				printf("%3d %3d --- --- %1d %5d %9d %9d %9d %9d%s\n",
+					pdf, mfi, s, dbrmo,
+					dpref, dpgdck, jdbck, gclk2,
+					gclk2 == target_clock ? "    YES" : "");
+
+				found++;
+			}
+		}
+	}
+
+	/* fractional multipliers */
+	for (pdf = PDF_MIN; pdf <= PDF_MAX; pdf++) {
+		for (mfi = MFI_MIN; mfi <= MFI_MAX; mfi++) {
+			for (mfn = 1; mfn <= MFN_MAX; mfn++) {
+				for (mfd = 1; mfd <= MFD_MAX; mfd++) {
+					for (s = 0; s <= S_MAX; s++) {
+						xout = calculate(xin, target_clock,
+							    ppm, pdf, mfi, mfn, mfd, s,
+							    &dpref, &dpgdck, &jdbck,
+							    &gclk2, &dbrmo);
+						if (xout < 0)
+							continue;
+
+						if (found == 0) {
+							printf("pdf mfi mfn mfd s dbrmo     dpref    dpgdck     jdbck     gclk2 exact?\n");
+							printf("--- --- --- --- - -----     -----    ------     -----     ----- ------\n");
+						}
+
+						printf("%3d %3d %3d %3d %1d %5d %9d %9d %9d %9d%s\n",
+							pdf, mfi, mfn, mfd, s,
+							dbrmo, dpref, dpgdck, jdbck, gclk2,
+							gclk2 == target_clock ? "    YES" : "");
+
+						found++;
+					}
+				}
+			}
+
+		}
+	}
+
+	return found;
+}
+
+int main(int argc, char *argv[])
+{
+	int xin, want_gclk2, found, ppm = 100;
+
+	if (argc < 3) {
+		fprintf(stderr, "usage: mpc86x_clk <xin> <want_gclk2> [ppm]\n");
+		fprintf(stderr, "       default ppm is 100\n");
+		return 10;
+	}
+
+	xin  = atoi(argv[1]);
+	want_gclk2 = atoi(argv[2]);
+	if (argc >= 4)
+		ppm = atoi(argv[3]);
+
+	found = conf_clock(xin, want_gclk2, ppm);
+	if (found <= 0) {
+		fprintf(stderr, "cannot produce gclk2 %d from xin %d\n",
+			want_gclk2, xin);
+		return EXIT_FAILURE;
+	}
+
+	return EXIT_SUCCESS;
+}