Pārlūkot izejas kodu

spl: Use standard FIT entries

SPL is creating fit-images DT node when loadables are recorded in selected
configuration. Entries which are created are using entry-point and
load-addr property names. But there shouldn't be a need to use non standard
properties because entry/load are standard FIT properties. But using
standard FIT properties enables option to use generic FIT functions to
descrease SPL size. Here is result for ZynqMP virt configuration:
xilinx_zynqmp_virt: spl/u-boot-spl:all -82 spl/u-boot-spl:rodata -22 spl/u-boot-spl:text -60

The patch causes change in run time fit image record.
Before:
fit-images {
        uboot {
                os = "u-boot";
                type = "firmware";
                size = <0xfd520>;
                entry-point = <0x8000000>;
                load-addr = <0x8000000>;
        };
};

After:
fit-images {
        uboot {
                os = "u-boot";
                type = "firmware";
                size = <0xfd520>;
                entry = <0x8000000>;
                load = <0x8000000>;
        };
};

Replacing calling fdt_getprop_u32() by fit_image_get_entry/load() also
enables support for reading entry/load properties recorded in 64bit format.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek 3 gadi atpakaļ
vecāks
revīzija
caa7fc2c57

+ 2 - 2
common/fdt_support.c

@@ -616,9 +616,9 @@ int fdt_record_loadable(void *blob, u32 index, const char *name,
 	 * However, spl_fit.c is not 64bit safe either: i.e. we should not
 	 * have an issue here.
 	 */
-	fdt_setprop_u32(blob, node, "load-addr", load_addr);
+	fdt_setprop_u32(blob, node, "load", load_addr);
 	if (entry_point != -1)
-		fdt_setprop_u32(blob, node, "entry-point", entry_point);
+		fdt_setprop_u32(blob, node, "entry", entry_point);
 	fdt_setprop_u32(blob, node, "size", size);
 	if (type)
 		fdt_setprop_string(blob, node, "type", type);

+ 4 - 3
common/spl/spl_atf.c

@@ -132,10 +132,11 @@ static int spl_fit_images_find(void *blob, int os)
 uintptr_t spl_fit_images_get_entry(void *blob, int node)
 {
 	ulong  val;
+	int ret;
 
-	val = fdt_getprop_u32(blob, node, "entry-point");
-	if (val == FDT_ERROR)
-		val = fdt_getprop_u32(blob, node, "load-addr");
+	ret = fit_image_get_entry(blob, node, &val);
+	if (ret)
+		ret = fit_image_get_load(blob, node, &val);
 
 	debug("%s: entry point 0x%lx\n", __func__, val);
 	return val;

+ 7 - 1
common/spl/spl_fit.c

@@ -332,9 +332,15 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
 	}
 
 	if (image_info) {
+		ulong entry_point;
+
 		image_info->load_addr = load_addr;
 		image_info->size = length;
-		image_info->entry_point = fdt_getprop_u32(fit, node, "entry");
+
+		if (!fit_image_get_entry(fit, node, &entry_point))
+			image_info->entry_point = entry_point;
+		else
+			image_info->entry_point = FDT_ERROR;
 	}
 
 	return 0;

+ 3 - 5
common/spl/spl_opensbi.c

@@ -61,11 +61,9 @@ void spl_invoke_opensbi(struct spl_image_info *spl_image)
 	}
 
 	/* Get U-Boot entry point */
-	uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node,
-				      "entry-point");
-	if (uboot_entry == FDT_ERROR)
-		uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node,
-					      "load-addr");
+	ret = fit_image_get_entry(spl_image->fdt_addr, uboot_node, &uboot_entry);
+	if (ret)
+		ret = fit_image_get_load(spl_image->fdt_addr, uboot_node, &uboot_entry);
 
 	/* Prepare obensbi_info object */
 	opensbi_info.magic = FW_DYNAMIC_INFO_MAGIC_VALUE;

+ 84 - 0
doc/uImage.FIT/howto.txt

@@ -66,6 +66,90 @@ can point to a script which generates this image source file during
 the build process. It gets passed a list of device tree files (taken from the
 CONFIG_OF_LIST symbol).
 
+The SPL also records to a DT all additional images (called loadables) which are
+loaded. The information about loadables locations is passed via the DT node with
+fit-images name.
+
+Loadables Example
+-----------------
+Consider the following case for an ARM64 platform where U-Boot runs in EL2
+started by ATF where SPL is loading U-Boot (as loadables) and ATF (as firmware).
+
+/dts-v1/;
+
+/ {
+	description = "Configuration to load ATF before U-Boot";
+
+	images {
+		uboot {
+			description = "U-Boot (64-bit)";
+			data = /incbin/("u-boot-nodtb.bin");
+			type = "firmware";
+			os = "u-boot";
+			arch = "arm64";
+			compression = "none";
+			load = <0x8 0x8000000>;
+			entry = <0x8 0x8000000>;
+			hash {
+				algo = "md5";
+			};
+		};
+		atf {
+			description = "ARM Trusted Firmware";
+			data = /incbin/("bl31.bin");
+			type = "firmware";
+			os = "arm-trusted-firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <0xfffea000>;
+			entry = <0xfffea000>;
+			hash {
+				algo = "md5";
+			};
+		};
+		fdt_1 {
+			description = "zynqmp-zcu102-revA";
+			data = /incbin/("arch/arm/dts/zynqmp-zcu102-revA.dtb");
+			type = "flat_dt";
+			arch = "arm64";
+			compression = "none";
+			load = <0x100000>;
+			hash {
+				algo = "md5";
+			};
+		};
+	};
+	configurations {
+		default = "config_1";
+
+		config_1 {
+			description = "zynqmp-zcu102-revA";
+			firmware = "atf";
+			loadables = "uboot";
+			fdt = "fdt_1";
+		};
+	};
+};
+
+In this case the SPL records via fit-images DT node the information about
+loadables U-Boot image.
+
+ZynqMP> fdt addr $fdtcontroladdr
+ZynqMP> fdt print /fit-images
+fit-images {
+	uboot {
+		os = "u-boot";
+		type = "firmware";
+		size = <0x001017c8>;
+		entry = <0x00000008 0x08000000>;
+		load = <0x00000008 0x08000000>;
+	};
+};
+
+As you can see entry and load properties are 64bit wide to support loading
+images above 4GB (in past entry and load properties where just 32bit).
+
+
 Example 1 -- old-style (non-FDT) kernel booting
 -----------------------------------------------