Browse Source

mx7ulp: Update unlock and refresh sequences in sWDOG driver

According to i.MX7ULP Reference Manual the second word write for both
UNLOCK and REFRESH operations must occur in maximum 16 bus clock.

The current code is using writel() function which has a DMB barrier to
order the memory access. The DMB between two words write may introduce
some delay in certain circumstance, causing a WDOG timeout due to 16 bus
clock window requirement.

Replace writel() function by __raw_writel() to achieve a faster memory
access and avoid such issue.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Breno Lima 3 years ago
parent
commit
c6ae713c7c
1 changed files with 12 additions and 6 deletions
  1. 12 6
      drivers/watchdog/ulp_wdog.c

+ 12 - 6
drivers/watchdog/ulp_wdog.c

@@ -52,8 +52,10 @@ void hw_watchdog_reset(void)
 {
 	struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
 
-	writel(REFRESH_WORD0, &wdog->cnt);
-	writel(REFRESH_WORD1, &wdog->cnt);
+	dmb();
+	__raw_writel(REFRESH_WORD0, &wdog->cnt);
+	__raw_writel(REFRESH_WORD1, &wdog->cnt);
+	dmb();
 }
 
 void hw_watchdog_init(void)
@@ -61,8 +63,10 @@ void hw_watchdog_init(void)
 	u8 val;
 	struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
 
-	writel(UNLOCK_WORD0, &wdog->cnt);
-	writel(UNLOCK_WORD1, &wdog->cnt);
+	dmb();
+	__raw_writel(UNLOCK_WORD0, &wdog->cnt);
+	__raw_writel(UNLOCK_WORD1, &wdog->cnt);
+	dmb();
 
 	val = readb(&wdog->cs2);
 	val |= WDGCS2_FLG;
@@ -81,8 +85,10 @@ void reset_cpu(void)
 {
 	struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
 
-	writel(UNLOCK_WORD0, &wdog->cnt);
-	writel(UNLOCK_WORD1, &wdog->cnt);
+	dmb();
+	__raw_writel(UNLOCK_WORD0, &wdog->cnt);
+	__raw_writel(UNLOCK_WORD1, &wdog->cnt);
+	dmb();
 
 	hw_watchdog_set_timeout(5); /* 5ms timeout */
 	writel(0, &wdog->win);