|
@@ -88,10 +88,92 @@ One RV3188 baord is supported:
|
|
|
|
|
|
For example:
|
|
|
|
|
|
+1. To build RK3288 board:
|
|
|
+
|
|
|
CROSS_COMPILE=arm-linux-gnueabi- make O=firefly firefly-rk3288_defconfig all
|
|
|
|
|
|
-(or you can use another cross compiler if you prefer)
|
|
|
+ (or you can use another cross compiler if you prefer)
|
|
|
+
|
|
|
+2. To build RK3399 board:
|
|
|
+
|
|
|
+ Option 1: Package the image with Rockchip miniloader:
|
|
|
+
|
|
|
+ - Compile U-Boot
|
|
|
+
|
|
|
+ => cd /path/to/u-boot
|
|
|
+ => make nanopi-neo4-rk3399_defconfig
|
|
|
+ => make
|
|
|
+ => make u-boot.itb
|
|
|
+
|
|
|
+ - Get the rkbin
|
|
|
+
|
|
|
+ => git clone https://github.com/rockchip-linux/rkbin.git
|
|
|
+
|
|
|
+ - Create trust.img
|
|
|
+
|
|
|
+ => cd /path/to/rkbin
|
|
|
+ => ./tools/trust_merger RKTRUST/RK3399TRUST.ini
|
|
|
+
|
|
|
+ - Create uboot.img
|
|
|
+
|
|
|
+ => cd /path/to/rkbin
|
|
|
+ => ./tools/loaderimage --pack --uboot /path/to/u-boot/u-boot-dtb.bin uboot.img
|
|
|
+
|
|
|
+ (Get trust.img and uboot.img)
|
|
|
+
|
|
|
+ Option 2: Package the image with SPL:
|
|
|
+
|
|
|
+ - We need the Python elftools.elf.elffile library for make_fit_atf.py to work
|
|
|
+
|
|
|
+ => sudo apt-get install python-pyelftools
|
|
|
+
|
|
|
+ - Export cross compiler path for aarch64
|
|
|
+
|
|
|
+ - Compile ATF
|
|
|
+
|
|
|
+ For Puma board.
|
|
|
+
|
|
|
+ => git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
|
|
|
+ => cd arm-trusted-firmware
|
|
|
+ => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
|
|
|
+
|
|
|
+ (copy bl31.bin into U-Boot root dir)
|
|
|
+ => cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin
|
|
|
+
|
|
|
+ For rest of rk3399 boards.
|
|
|
+
|
|
|
+ => git clone https://github.com/ARM-software/arm-trusted-firmware.git
|
|
|
+ => cd arm-trusted-firmware
|
|
|
+
|
|
|
+ (export cross compiler path for Cortex-M0 MCU likely arm-none-eabi-)
|
|
|
+ => make realclean
|
|
|
+ => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
|
|
|
+
|
|
|
+ (copy bl31.elf into U-Boot root dir)
|
|
|
+ => cp build/rk3399/release/bl31/bl31.elf /path/to/u-boot
|
|
|
+
|
|
|
+ - Compile PMU M0 firmware
|
|
|
+
|
|
|
+ This is optional for most of the rk3399 boards and required only for Puma board.
|
|
|
+
|
|
|
+ => git clone git://git.theobroma-systems.com/rk3399-cortex-m0.git
|
|
|
+ => cd rk3399-cortex-m0
|
|
|
|
|
|
+ (export cross compiler path for Cortex-M0 PMU)
|
|
|
+ => make CROSS_COMPILE=arm-cortex_m0-eabi-
|
|
|
+
|
|
|
+ (copy rk3399m0.bin into U-Boot root dir)
|
|
|
+ => cp rk3399m0.bin /path/to/u-boot
|
|
|
+
|
|
|
+ - Compile U-Boot
|
|
|
+
|
|
|
+ => cd /path/to/u-boot
|
|
|
+ => make orangepi-rk3399_defconfig
|
|
|
+ => make
|
|
|
+ => make u-boot.itb
|
|
|
+
|
|
|
+ (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get
|
|
|
+ spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL)
|
|
|
|
|
|
Writing to the board with USB
|
|
|
=============================
|
|
@@ -225,6 +307,153 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out
|
|
|
truncate -s %2048 u-boot.bin
|
|
|
cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
|
|
|
|
|
|
+Booting from an SD card on RK3399
|
|
|
+=================================
|
|
|
+
|
|
|
+To write an image that boots from an SD card (assumed to be /dev/sdc):
|
|
|
+
|
|
|
+Option 1: Package the image with Rockchip miniloader:
|
|
|
+
|
|
|
+ - Create idbloader.img
|
|
|
+
|
|
|
+ => cd /path/to/u-boot
|
|
|
+ => ./tools/mkimage -n rk3399 -T rksd -d /path/to/rkbin/bin/rk33/rk3399_ddr_800MHz_v1.20.bin idbloader.img
|
|
|
+ => cat /path/to/rkbin/bin/rk33/rk3399_miniloader_v1.19.bin >> idbloader.img
|
|
|
+
|
|
|
+ - Write idbloader.img at 64 sector
|
|
|
+
|
|
|
+ => sudo dd if=idbloader.img of=/dev/sdc seek=64
|
|
|
+
|
|
|
+ - Write trust.img at 24576
|
|
|
+
|
|
|
+ => sudo dd if=trust.img of=/dev/sdc seek=24576
|
|
|
+
|
|
|
+ - Write uboot.img at 16384 sector
|
|
|
+
|
|
|
+ => sudo dd if=uboot.img of=/dev/sdc seek=16384
|
|
|
+ => sync
|
|
|
+
|
|
|
+Put this SD (or micro-SD) card into your board and reset it. You should see
|
|
|
+something like:
|
|
|
+
|
|
|
+DDR Version 1.20 20190314
|
|
|
+In
|
|
|
+Channel 0: DDR3, 933MHz
|
|
|
+Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
|
|
|
+no stride
|
|
|
+ch 0 ddrconfig = 0x101, ddrsize = 0x20
|
|
|
+pmugrf_os_reg[2] = 0x10006281, stride = 0x17
|
|
|
+OUT
|
|
|
+Boot1: 2019-03-14, version: 1.19
|
|
|
+CPUId = 0x0
|
|
|
+ChipType = 0x10, 239
|
|
|
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
|
|
|
+mmc: ERROR: Card did not respond to voltage select!
|
|
|
+emmc reinit
|
|
|
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
|
|
|
+mmc: ERROR: Card did not respond to voltage select!
|
|
|
+emmc reinit
|
|
|
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
|
|
|
+mmc: ERROR: Card did not respond to voltage select!
|
|
|
+SdmmcInit=2 1
|
|
|
+mmc0:cmd5,20
|
|
|
+SdmmcInit=0 0
|
|
|
+BootCapSize=0
|
|
|
+UserCapSize=60543MB
|
|
|
+FwPartOffset=2000 , 0
|
|
|
+StorageInit ok = 45266
|
|
|
+SecureMode = 0
|
|
|
+SecureInit read PBA: 0x4
|
|
|
+SecureInit read PBA: 0x404
|
|
|
+SecureInit read PBA: 0x804
|
|
|
+SecureInit read PBA: 0xc04
|
|
|
+SecureInit read PBA: 0x1004
|
|
|
+SecureInit read PBA: 0x1404
|
|
|
+SecureInit read PBA: 0x1804
|
|
|
+SecureInit read PBA: 0x1c04
|
|
|
+SecureInit ret = 0, SecureMode = 0
|
|
|
+atags_set_bootdev: ret:(0)
|
|
|
+GPT 0x3380ec0 signature is wrong
|
|
|
+recovery gpt...
|
|
|
+GPT 0x3380ec0 signature is wrong
|
|
|
+recovery gpt fail!
|
|
|
+LoadTrust Addr:0x4000
|
|
|
+No find bl30.bin
|
|
|
+Load uboot, ReadLba = 2000
|
|
|
+hdr 0000000003380880 + 0x0:0x88,0x41,0x3e,0x97,0xe6,0x61,0x54,0x23,0xe9,0x5a,0xd1,0x2b,0xdc,0x2f,0xf9,0x35,
|
|
|
+
|
|
|
+Load OK, addr=0x200000, size=0x9c9c0
|
|
|
+RunBL31 0x10000
|
|
|
+NOTICE: BL31: v1.3(debug):370ab80
|
|
|
+NOTICE: BL31: Built : 09:23:41, Mar 4 2019
|
|
|
+NOTICE: BL31: Rockchip release version: v1.1
|
|
|
+INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
|
|
|
+INFO: Using opteed sec cpu_context!
|
|
|
+INFO: boot cpu mask: 0
|
|
|
+INFO: plat_rockchip_pmu_init(1181): pd status 3e
|
|
|
+INFO: BL31: Initializing runtime services
|
|
|
+INFO: BL31: Initializing BL32
|
|
|
+INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64)
|
|
|
+
|
|
|
+INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
|
|
|
+
|
|
|
+INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
|
|
|
+INFO: BL31: Preparing for EL3 exit to normal world
|
|
|
+INFO: Entry point address = 0x200000
|
|
|
+INFO: SPSR = 0x3c9
|
|
|
+
|
|
|
+
|
|
|
+U-Boot 2019.04-rc4-00136-gfd121f9641-dirty (Apr 16 2019 - 14:02:47 +0530)
|
|
|
+
|
|
|
+Model: FriendlyARM NanoPi NEO4
|
|
|
+DRAM: 1022 MiB
|
|
|
+MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0
|
|
|
+Loading Environment from MMC... *** Warning - bad CRC, using default environment
|
|
|
+
|
|
|
+In: serial@ff1a0000
|
|
|
+Out: serial@ff1a0000
|
|
|
+Err: serial@ff1a0000
|
|
|
+Model: FriendlyARM NanoPi NEO4
|
|
|
+Net: eth0: ethernet@fe300000
|
|
|
+Hit any key to stop autoboot: 0
|
|
|
+=>
|
|
|
+
|
|
|
+Option 2: Package the image with SPL:
|
|
|
+
|
|
|
+ - Prefix rk3399 header to SPL image
|
|
|
+
|
|
|
+ => cd /path/to/u-boot
|
|
|
+ => ./tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl-dtb.bin out
|
|
|
+
|
|
|
+ - Write prefixed SPL at 64th sector
|
|
|
+
|
|
|
+ => sudo dd if=out of=/dev/sdc seek=64
|
|
|
+
|
|
|
+ - Write U-Boot proper at 16384 sector
|
|
|
+
|
|
|
+ => sudo dd if=u-boot.itb of=/dev/sdc seek=16384
|
|
|
+ => sync
|
|
|
+
|
|
|
+Put this SD (or micro-SD) card into your board and reset it. You should see
|
|
|
+something like:
|
|
|
+
|
|
|
+U-Boot SPL board init
|
|
|
+Trying to boot from MMC1
|
|
|
+
|
|
|
+
|
|
|
+U-Boot 2019.01-00004-g14db5ee998 (Mar 11 2019 - 13:18:41 +0530)
|
|
|
+
|
|
|
+Model: Orange Pi RK3399 Board
|
|
|
+DRAM: 2 GiB
|
|
|
+MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0
|
|
|
+Loading Environment from MMC... OK
|
|
|
+In: serial@ff1a0000
|
|
|
+Out: serial@ff1a0000
|
|
|
+Err: serial@ff1a0000
|
|
|
+Model: Orange Pi RK3399 Board
|
|
|
+Net: eth0: ethernet@fe300000
|
|
|
+Hit any key to stop autoboot: 0
|
|
|
+=>
|
|
|
|
|
|
Using fastboot on rk3288
|
|
|
========================
|
|
@@ -385,5 +614,7 @@ There are some documents about partitions in the links below.
|
|
|
http://rockchip.wikidot.com/partitions
|
|
|
|
|
|
--
|
|
|
+Jagan Teki <jagan@amarulasolutions.com>
|
|
|
+27 Mar 2019
|
|
|
Simon Glass <sjg@chromium.org>
|
|
|
24 June 2015
|