Browse Source

sunxi: Enable EMAC on the Bananapi M3

The Bananapi M3 has an RTL8211E PHY connected to the EMAC using
RGMII. The PHY is powered by DCDC1 through SW @ 3.3V.

The board is designed to use 3.3V with RGMII, instead of the standard
reduced voltage of 2.5V we see everywhere. DLDO3, which provides the
I/O voltages, is raised to match.

This patch enables the EMAC and Realtek PHY drivers in the defconfig.
The device tree file already has the EMAC enabled.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Chen-Yu Tsai 5 years ago
parent
commit
c23b33f531
1 changed files with 3 additions and 1 deletions
  1. 3 1
      configs/Sinovoip_BPI_M3_defconfig

+ 3 - 1
configs/Sinovoip_BPI_M3_defconfig

@@ -21,8 +21,10 @@ CONFIG_CONSOLE_MUX=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3"
+CONFIG_PHY_REALTEK=y
+CONFIG_SUN8I_EMAC=y
 CONFIG_AXP_DCDC5_VOLT=1200
-CONFIG_AXP_DLDO3_VOLT=2500
+CONFIG_AXP_DLDO3_VOLT=3300
 CONFIG_AXP_SW_ON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y