|
@@ -0,0 +1,716 @@
|
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
+/*
|
|
|
+ * Copyright (c) 2019 Hardkernel Co., Ltd
|
|
|
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
|
|
|
+ */
|
|
|
+
|
|
|
+/dts-v1/;
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+#include <dt-bindings/pinctrl/rockchip.h>
|
|
|
+#include "rk3326.dtsi"
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "ODROID-GO Advance";
|
|
|
+ compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
|
|
|
+
|
|
|
+ chosen {
|
|
|
+ stdout-path = "serial2:115200n8";
|
|
|
+ };
|
|
|
+
|
|
|
+ backlight: backlight {
|
|
|
+ compatible = "pwm-backlight";
|
|
|
+ power-supply = <&vcc_bl>;
|
|
|
+ pwms = <&pwm1 0 25000 0>;
|
|
|
+ };
|
|
|
+
|
|
|
+ adc-joystick {
|
|
|
+ compatible = "adc-joystick";
|
|
|
+ io-channels = <&saradc 1>,
|
|
|
+ <&saradc 2>;
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+
|
|
|
+ axis@0 {
|
|
|
+ reg = <0>;
|
|
|
+ abs-range = <172 772>;
|
|
|
+ abs-fuzz = <10>;
|
|
|
+ abs-flat = <10>;
|
|
|
+ linux,code = <ABS_X>;
|
|
|
+ };
|
|
|
+
|
|
|
+ axis@1 {
|
|
|
+ reg = <1>;
|
|
|
+ abs-range = <278 815>;
|
|
|
+ abs-fuzz = <10>;
|
|
|
+ abs-flat = <10>;
|
|
|
+ linux,code = <ABS_Y>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ gpio-keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&btn_pins>;
|
|
|
+
|
|
|
+ /*
|
|
|
+ * *** ODROIDGO2-Advance Switch layout ***
|
|
|
+ * |------------------------------------------------|
|
|
|
+ * | sw15 sw16 |
|
|
|
+ * |------------------------------------------------|
|
|
|
+ * | sw1 |-------------------| sw8 |
|
|
|
+ * | sw3 sw4 | | sw7 sw5 |
|
|
|
+ * | sw2 | LCD Display | sw6 |
|
|
|
+ * | | | |
|
|
|
+ * | |-------------------| |
|
|
|
+ * | sw9 sw10 sw11 sw12 sw13 sw14 |
|
|
|
+ * |------------------------------------------------|
|
|
|
+ */
|
|
|
+
|
|
|
+ sw1 {
|
|
|
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "DPAD-UP";
|
|
|
+ linux,code = <BTN_DPAD_UP>;
|
|
|
+ };
|
|
|
+ sw2 {
|
|
|
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "DPAD-DOWN";
|
|
|
+ linux,code = <BTN_DPAD_DOWN>;
|
|
|
+ };
|
|
|
+ sw3 {
|
|
|
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "DPAD-LEFT";
|
|
|
+ linux,code = <BTN_DPAD_LEFT>;
|
|
|
+ };
|
|
|
+ sw4 {
|
|
|
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "DPAD-RIGHT";
|
|
|
+ linux,code = <BTN_DPAD_RIGHT>;
|
|
|
+ };
|
|
|
+ sw5 {
|
|
|
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "BTN-A";
|
|
|
+ linux,code = <BTN_EAST>;
|
|
|
+ };
|
|
|
+ sw6 {
|
|
|
+ gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "BTN-B";
|
|
|
+ linux,code = <BTN_SOUTH>;
|
|
|
+ };
|
|
|
+ sw7 {
|
|
|
+ gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "BTN-Y";
|
|
|
+ linux,code = <BTN_WEST>;
|
|
|
+ };
|
|
|
+ sw8 {
|
|
|
+ gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "BTN-X";
|
|
|
+ linux,code = <BTN_NORTH>;
|
|
|
+ };
|
|
|
+ sw9 {
|
|
|
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "F1";
|
|
|
+ linux,code = <BTN_TRIGGER_HAPPY1>;
|
|
|
+ };
|
|
|
+ sw10 {
|
|
|
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "F2";
|
|
|
+ linux,code = <BTN_TRIGGER_HAPPY2>;
|
|
|
+ };
|
|
|
+ sw11 {
|
|
|
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "F3";
|
|
|
+ linux,code = <BTN_TRIGGER_HAPPY3>;
|
|
|
+ };
|
|
|
+ sw12 {
|
|
|
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "F4";
|
|
|
+ linux,code = <BTN_TRIGGER_HAPPY4>;
|
|
|
+ };
|
|
|
+ sw13 {
|
|
|
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "F5";
|
|
|
+ linux,code = <BTN_TRIGGER_HAPPY5>;
|
|
|
+ };
|
|
|
+ sw14 {
|
|
|
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "F6";
|
|
|
+ linux,code = <BTN_TRIGGER_HAPPY6>;
|
|
|
+ };
|
|
|
+ sw15 {
|
|
|
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "TOP-LEFT";
|
|
|
+ linux,code = <BTN_TL>;
|
|
|
+ };
|
|
|
+ sw16 {
|
|
|
+ gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "TOP-RIGHT";
|
|
|
+ linux,code = <BTN_TR>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds: gpio-leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&blue_led_pin>;
|
|
|
+
|
|
|
+ blue_led: led-0 {
|
|
|
+ label = "blue:heartbeat";
|
|
|
+ gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
|
+ linux,default-trigger = "heartbeat";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817-sound {
|
|
|
+ compatible = "simple-audio-card";
|
|
|
+ simple-audio-card,format = "i2s";
|
|
|
+ simple-audio-card,name = "rockchip,rk817-codec";
|
|
|
+ simple-audio-card,mclk-fs = <256>;
|
|
|
+ simple-audio-card,widgets =
|
|
|
+ "Microphone", "Mic Jack",
|
|
|
+ "Headphone", "Headphone Jack";
|
|
|
+ simple-audio-card,routing =
|
|
|
+ "MIC_IN", "Mic Jack",
|
|
|
+ "Headphone Jack", "HPOL",
|
|
|
+ "Headphone Jack", "HPOR";
|
|
|
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
|
+ simple-audio-card,codec-hp-det = <1>;
|
|
|
+
|
|
|
+ simple-audio-card,cpu {
|
|
|
+ sound-dai = <&i2s1_2ch>;
|
|
|
+ };
|
|
|
+
|
|
|
+ simple-audio-card,codec {
|
|
|
+ sound-dai = <&rk817_codec>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vccsys: vccsys {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc3v8_sys";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-min-microvolt = <3800000>;
|
|
|
+ regulator-max-microvolt = <3800000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_host: vcc_host {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc_host";
|
|
|
+ regulator-min-microvolt = <5000000>;
|
|
|
+ regulator-max-microvolt = <5000000>;
|
|
|
+
|
|
|
+ gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
|
+ enable-active-high;
|
|
|
+ regulator-always-on;
|
|
|
+ vin-supply = <&vccsys>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&cpu0 {
|
|
|
+ cpu-supply = <&vdd_arm>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu1 {
|
|
|
+ cpu-supply = <&vdd_arm>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu2 {
|
|
|
+ cpu-supply = <&vdd_arm>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu3 {
|
|
|
+ cpu-supply = <&vdd_arm>;
|
|
|
+};
|
|
|
+
|
|
|
+&cru {
|
|
|
+ assigned-clocks = <&cru PLL_NPLL>,
|
|
|
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
|
|
|
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
|
|
|
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
|
|
|
+ <&cru PLL_CPLL>;
|
|
|
+
|
|
|
+ assigned-clock-rates = <1188000000>,
|
|
|
+ <200000000>, <200000000>,
|
|
|
+ <150000000>, <150000000>,
|
|
|
+ <100000000>, <200000000>,
|
|
|
+ <17000000>;
|
|
|
+};
|
|
|
+
|
|
|
+&display_subsystem {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&dsi {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ ports {
|
|
|
+ mipi_out: port@1 {
|
|
|
+ reg = <1>;
|
|
|
+
|
|
|
+ mipi_out_panel: endpoint {
|
|
|
+ remote-endpoint = <&mipi_in_panel>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ panel@0 {
|
|
|
+ compatible = "elida,kd35t133";
|
|
|
+ reg = <0>;
|
|
|
+ backlight = <&backlight>;
|
|
|
+ iovcc-supply = <&vcc_lcd>;
|
|
|
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
|
+ vdd-supply = <&vcc_lcd>;
|
|
|
+
|
|
|
+ port {
|
|
|
+ mipi_in_panel: endpoint {
|
|
|
+ remote-endpoint = <&mipi_out_panel>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&dsi_dphy {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&gpu {
|
|
|
+ mali-supply = <&vdd_logic>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&i2c0 {
|
|
|
+ clock-frequency = <400000>;
|
|
|
+ i2c-scl-falling-time-ns = <16>;
|
|
|
+ i2c-scl-rising-time-ns = <280>;
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ rk817: pmic@20 {
|
|
|
+ compatible = "rockchip,rk817";
|
|
|
+ reg = <0x20>;
|
|
|
+ interrupt-parent = <&gpio0>;
|
|
|
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
|
|
+ pinctrl-names = "default", "pmic-sleep",
|
|
|
+ "pmic-power-off", "pmic-reset";
|
|
|
+ pinctrl-0 = <&pmic_int>;
|
|
|
+ pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
|
|
+ pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
|
|
+ pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
|
|
|
+ rockchip,system-power-controller;
|
|
|
+ wakeup-source;
|
|
|
+ #clock-cells = <1>;
|
|
|
+ clock-output-names = "rk808-clkout1", "xin32k";
|
|
|
+
|
|
|
+ vcc1-supply = <&vccsys>;
|
|
|
+ vcc2-supply = <&vccsys>;
|
|
|
+ vcc3-supply = <&vccsys>;
|
|
|
+ vcc4-supply = <&vccsys>;
|
|
|
+ vcc5-supply = <&vccsys>;
|
|
|
+ vcc6-supply = <&vccsys>;
|
|
|
+ vcc7-supply = <&vccsys>;
|
|
|
+
|
|
|
+ pinctrl_rk8xx: pinctrl_rk8xx {
|
|
|
+ gpio-controller;
|
|
|
+ #gpio-cells = <2>;
|
|
|
+
|
|
|
+ rk817_ts_gpio1: rk817_ts_gpio1 {
|
|
|
+ pins = "gpio_ts";
|
|
|
+ function = "pin_fun1";
|
|
|
+ /* output-low; */
|
|
|
+ /* input-enable; */
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817_gt_gpio2: rk817_gt_gpio2 {
|
|
|
+ pins = "gpio_gt";
|
|
|
+ function = "pin_fun1";
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817_pin_ts: rk817_pin_ts {
|
|
|
+ pins = "gpio_ts";
|
|
|
+ function = "pin_fun0";
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817_pin_gt: rk817_pin_gt {
|
|
|
+ pins = "gpio_gt";
|
|
|
+ function = "pin_fun0";
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817_slppin_null: rk817_slppin_null {
|
|
|
+ pins = "gpio_slp";
|
|
|
+ function = "pin_fun0";
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817_slppin_slp: rk817_slppin_slp {
|
|
|
+ pins = "gpio_slp";
|
|
|
+ function = "pin_fun1";
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
|
|
+ pins = "gpio_slp";
|
|
|
+ function = "pin_fun2";
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817_slppin_rst: rk817_slppin_rst {
|
|
|
+ pins = "gpio_slp";
|
|
|
+ function = "pin_fun3";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ regulators {
|
|
|
+ vdd_logic: DCDC_REG1 {
|
|
|
+ regulator-name = "vdd_logic";
|
|
|
+ regulator-min-microvolt = <950000>;
|
|
|
+ regulator-max-microvolt = <1150000>;
|
|
|
+ regulator-ramp-delay = <6001>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <950000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_arm: DCDC_REG2 {
|
|
|
+ regulator-name = "vdd_arm";
|
|
|
+ regulator-min-microvolt = <950000>;
|
|
|
+ regulator-max-microvolt = <1350000>;
|
|
|
+ regulator-ramp-delay = <6001>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <950000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
|
+ regulator-name = "vcc_ddr";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_3v3: DCDC_REG4 {
|
|
|
+ regulator-name = "vcc_3v3";
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_1v8: LDO_REG2 {
|
|
|
+ regulator-name = "vcc_1v8";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_1v0: LDO_REG3 {
|
|
|
+ regulator-name = "vdd_1v0";
|
|
|
+ regulator-min-microvolt = <1000000>;
|
|
|
+ regulator-max-microvolt = <1000000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <1000000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v3_pmu: LDO_REG4 {
|
|
|
+ regulator-name = "vcc3v3_pmu";
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vccio_sd: LDO_REG5 {
|
|
|
+ regulator-name = "vccio_sd";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_sd: LDO_REG6 {
|
|
|
+ regulator-name = "vcc_sd";
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_bl: LDO_REG7 {
|
|
|
+ regulator-name = "vcc_bl";
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_lcd: LDO_REG8 {
|
|
|
+ regulator-name = "vcc_lcd";
|
|
|
+ regulator-min-microvolt = <2800000>;
|
|
|
+ regulator-max-microvolt = <2800000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <2800000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_cam: LDO_REG9 {
|
|
|
+ regulator-name = "vcc_cam";
|
|
|
+ regulator-min-microvolt = <3000000>;
|
|
|
+ regulator-max-microvolt = <3000000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3000000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ battery {
|
|
|
+ compatible = "rk817,battery";
|
|
|
+ ocv_table = <3500 3625 3685 3697 3718 3735 3748
|
|
|
+ 3760 3774 3788 3802 3816 3834 3853
|
|
|
+ 3877 3908 3946 3975 4018 4071 4106>;
|
|
|
+
|
|
|
+ /* KPL605475 Battery Spec */
|
|
|
+ /*
|
|
|
+ Capacity : 3.7V 3000mA
|
|
|
+ Normal Voltage = 3.7V
|
|
|
+ Cut-Off Voltage : 3.1V
|
|
|
+ Internal Impedance : 180 mOhm
|
|
|
+ Charging Voltage : 4.2V
|
|
|
+ Charging Voltage Max : 4.25V
|
|
|
+ Sample resister : 10 mohm
|
|
|
+ */
|
|
|
+ design_capacity = <3000>;
|
|
|
+ design_qmax = <3000>;
|
|
|
+ bat_res = <180>;
|
|
|
+ sleep_enter_current = <300>;
|
|
|
+ sleep_exit_current = <300>;
|
|
|
+ sleep_filter_current = <100>;
|
|
|
+ power_off_thresd = <3500>;
|
|
|
+ zero_algorithm_vol = <3700>;
|
|
|
+ max_soc_offset = <60>;
|
|
|
+ monitor_sec = <5>;
|
|
|
+ virtual_power = <0>;
|
|
|
+ sample_res = <10>;
|
|
|
+ };
|
|
|
+
|
|
|
+ charger {
|
|
|
+ compatible = "rk817,charger";
|
|
|
+ min_input_voltage = <4500>;
|
|
|
+ max_input_current = <1500>;
|
|
|
+ max_chrg_current = <2000>;
|
|
|
+ max_chrg_voltage = <4200>;
|
|
|
+ chrg_term_mode = <0>;
|
|
|
+ chrg_finish_cur = <300>;
|
|
|
+ virtual_power = <0>;
|
|
|
+ sample_res = <10>;
|
|
|
+
|
|
|
+ /* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
|
|
|
+ dc_det_gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
|
+ chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
|
+
|
|
|
+ extcon = <&u2phy>;
|
|
|
+ };
|
|
|
+
|
|
|
+ rk817_codec: codec {
|
|
|
+ #sound-dai-cells = <0>;
|
|
|
+ compatible = "rockchip,rk817-codec";
|
|
|
+ clocks = <&cru SCLK_I2S1_OUT>;
|
|
|
+ clock-names = "mclk";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&i2s1_2ch_mclk>;
|
|
|
+ hp-volume = <20>;
|
|
|
+ spk-volume = <3>;
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
|
|
|
+&i2c1 {
|
|
|
+ clock-frequency = <400000>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+/* I2S 1 Channel Used */
|
|
|
+&i2s1_2ch {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&io_domains {
|
|
|
+ vccio1-supply = <&vcc_3v3>;
|
|
|
+ vccio2-supply = <&vccio_sd>;
|
|
|
+ vccio3-supply = <&vcc_3v3>;
|
|
|
+ vccio4-supply = <&vcc_3v3>;
|
|
|
+ vccio5-supply = <&vcc_3v3>;
|
|
|
+ vccio6-supply = <&vcc_3v3>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pmu_io_domains {
|
|
|
+ pmuio1-supply = <&vcc3v3_pmu>;
|
|
|
+ pmuio2-supply = <&vcc3v3_pmu>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pwm1 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&saradc {
|
|
|
+ vref-supply = <&vcc_1v8>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sdmmc {
|
|
|
+ bus-width = <4>;
|
|
|
+ cap-sd-highspeed;
|
|
|
+ card-detect-delay = <200>;
|
|
|
+ cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
|
|
|
+ sd-uhs-sdr12;
|
|
|
+ sd-uhs-sdr25;
|
|
|
+ sd-uhs-sdr50;
|
|
|
+ sd-uhs-sdr104;
|
|
|
+ vmmc-supply = <&vcc_sd>;
|
|
|
+ vqmmc-supply = <&vccio_sd>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&tsadc {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&u2phy {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ u2phy_host: host-port {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ u2phy_otg: otg-port {
|
|
|
+ status = "disabled";
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&usb20_otg {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
|
|
|
+&uart1 {
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&uart1_xfer &uart1_cts>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&uart2 {
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&uart2m1_xfer>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&vopb {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&vopb_mmu {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pinctrl {
|
|
|
+ btns {
|
|
|
+ btn_pins: btn-pins {
|
|
|
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
|
+ <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ headphone {
|
|
|
+ hp_det: hp-det {
|
|
|
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ blue_led_pin: blue-led-pin {
|
|
|
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ pmic {
|
|
|
+ dc_det: dc-det {
|
|
|
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+
|
|
|
+ pmic_int: pmic-int {
|
|
|
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
+ };
|
|
|
+
|
|
|
+ soc_slppin_gpio: soc_slppin_gpio {
|
|
|
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
|
|
|
+ };
|
|
|
+
|
|
|
+ soc_slppin_rst: soc_slppin_rst {
|
|
|
+ rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+
|
|
|
+ soc_slppin_slp: soc_slppin_slp {
|
|
|
+ rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|