Sfoglia il codice sorgente

ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size

Define the galois index table offset in chip head file. So user do not need
to set by himself. Driver will set it correctly according to sector_size.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Scott Wood <scottwood@freescale.com>
[rebased on master]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Wu, Josh 11 anni fa
parent
commit
b2d96dc28f

+ 6 - 0
arch/arm/include/asm/arch-at91/at91sam9x5.h

@@ -161,6 +161,12 @@
 #define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
 #define ATMEL_ID_UHP		ATMEL_ID_UHPHS
 
+/*
+ * PMECC table in ROM
+ */
+#define ATMEL_PMECC_INDEX_OFFSET_512	0x8000
+#define ATMEL_PMECC_INDEX_OFFSET_1024	0x10000
+
 /*
  * at91sam9x5 specific prototypes
  */

+ 0 - 14
doc/README.atmel_pmecc

@@ -19,17 +19,6 @@ To use PMECC in this driver, the user needs to set:
 	   It can be 2, 4, 8, 12 or 24.
 	2. The PMECC sector size: CONFIG_PMECC_SECTOR_SIZE.
 	   It only can be 512 or 1024.
-	3. The PMECC index lookup table's offsets in ROM code: CONFIG_PMECC_INDEX_TABLE_OFFSET.
-	   In the chip datasheet section "Boot Stragegies", you can find
-	   two Galois Field Table in the ROM code. One table is for 512-bytes
-	   sector. Another is for 1024-byte sector. Each Galois Field includes
-	   two sub-table: indext table & alpha table.
-	   In the beginning of each Galois Field Table is the index table,
-	   Alpha table is in the following.
-	   So the index table's offset is same as the Galois Field Table.
-
-	   Please set CONFIG_PMECC_INDEX_TABLE_OFFSET correctly according the
-	   Galois Field Table's offset base on the sector size you used.
 
 Take AT91SAM9X5EK as an example, the board definition file likes:
 
@@ -38,7 +27,4 @@ Take AT91SAM9X5EK as an example, the board definition file likes:
 #define CONFIG_ATMEL_NAND_HW_PMECC	1
 #define CONFIG_PMECC_CAP		2
 #define CONFIG_PMECC_SECTOR_SIZE	512
-#define CONFIG_PMECC_INDEX_TABLE_OFFSET	0x8000
 
-NOTE: If you use 1024 as the sector size, then need set 0x10000 as the
- CONFIG_PMECC_INDEX_TABLE_OFFSET

+ 4 - 1
drivers/mtd/nand/atmel_nand.c

@@ -637,7 +637,10 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
 
 	cap = host->pmecc_corr_cap = CONFIG_PMECC_CAP;
 	sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
-	host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET;
+	if (host->pmecc_sector_size == 512)
+		host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_512;
+	else
+		host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_1024;
 
 	MTDDEBUG(MTD_DEBUG_LEVEL1,
 		"Initialize PMECC params, cap: %d, sector: %d\n",

+ 0 - 1
include/configs/at91sam9x5ek.h

@@ -121,7 +121,6 @@
 #define CONFIG_ATMEL_NAND_HW_PMECC	1
 #define CONFIG_PMECC_CAP		2
 #define CONFIG_PMECC_SECTOR_SIZE	512
-#define CONFIG_PMECC_INDEX_TABLE_OFFSET	0x8000
 
 #define CONFIG_CMD_NAND_TRIMFFS
 

+ 0 - 1
include/configs/sama5d3xek.h

@@ -126,7 +126,6 @@
 #define CONFIG_ATMEL_NAND_HW_PMECC
 #define CONFIG_PMECC_CAP		4
 #define CONFIG_PMECC_SECTOR_SIZE	512
-#define CONFIG_PMECC_INDEX_TABLE_OFFSET	ATMEL_PMECC_INDEX_OFFSET_512
 #define CONFIG_CMD_NAND_TRIMFFS
 #endif