Browse Source

Merge tag 'u-boot-amlogic-20210810' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- odroid-n2: fix fdtfile suffix for n2-plus
- sei610 & meson64_android cleanups to prepare android 11 boot support
- use Android BCB mechanism for reboot reason instead of HW reboot flag
- Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
Tom Rini 2 years ago
parent
commit
aba3fa1d3f

+ 0 - 34
arch/arm/mach-meson/board-common.c

@@ -22,10 +22,7 @@
 #include <efi_loader.h>
 #include <u-boot/crc.h>
 
-#if CONFIG_IS_ENABLED(FASTBOOT)
 #include <asm/psci.h>
-#include <fastboot.h>
-#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -152,38 +149,7 @@ int board_late_init(void)
 	return meson_board_late_init();
 }
 
-#if CONFIG_IS_ENABLED(FASTBOOT)
-static unsigned int reboot_reason = REBOOT_REASON_NORMAL;
-
-int fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
-{
-	if (reason != FASTBOOT_REBOOT_REASON_BOOTLOADER)
-		return -ENOTSUPP;
-
-	reboot_reason = REBOOT_REASON_BOOTLOADER;
-
-	printf("Using reboot reason: 0x%x\n", reboot_reason);
-
-	return 0;
-}
-
-void reset_cpu(void)
-{
-	struct pt_regs regs;
-
-	regs.regs[0] = ARM_PSCI_0_2_FN_SYSTEM_RESET;
-	regs.regs[1] = reboot_reason;
-
-	printf("Rebooting with reason: 0x%lx\n", regs.regs[1]);
-
-	smc_call(&regs);
-
-	while (1)
-		;
-}
-#else
 void reset_cpu(void)
 {
 	psci_system_reset();
 }
-#endif

+ 1 - 1
board/amlogic/odroid-n2/odroid-n2.c

@@ -48,7 +48,7 @@ static struct meson_odroid_boards {
 	/* OdroidN2 rev 2019,2,7 */
 	{ MESON_SOC_ID_G12B, 330 * 4, 350 * 4, "n2" },
 	/* OdroidN2plus rev 2019,11,20 */
-	{ MESON_SOC_ID_G12B, 410 * 4, 430 * 4, "n2_plus" },
+	{ MESON_SOC_ID_G12B, 410 * 4, 430 * 4, "n2-plus" },
 	/* OdroidC4 rev 2020,01,29 */
 	{ MESON_SOC_ID_SM1,   80 * 4, 100 * 4, "c4" },
 	/* OdroidHC4 rev 2019,12,10 */

+ 1 - 1
configs/odroid-n2_defconfig

@@ -9,7 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-n2"
 CONFIG_MESON_G12A=y
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_IDENT_STRING=" odroid-n2/n2_plus"
+CONFIG_IDENT_STRING=" odroid-n2/n2-plus"
 CONFIG_DEBUG_UART=y
 CONFIG_OF_BOARD_SETUP=y
 # CONFIG_DISPLAY_CPUINFO is not set

+ 6 - 0
configs/sei510_defconfig

@@ -20,8 +20,12 @@ CONFIG_PREBOOT="run load_logo"
 # CONFIG_CONSOLE_MUX is not set
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_AVB_VERIFY=y
 # CONFIG_CMD_BDI is not set
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ABOOTIMG=y
 # CONFIG_CMD_IMI is not set
+CONFIG_CMD_BCB=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 # CONFIG_CMD_LOADS is not set
@@ -31,6 +35,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_BMP=y
 CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_AVB=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -83,4 +88,5 @@ CONFIG_VIDEO_BMP_RLE8=y
 CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y
+CONFIG_LIBAVB=y
 CONFIG_OF_LIBFDT_OVERLAY=y

+ 6 - 0
configs/sei610_defconfig

@@ -20,8 +20,12 @@ CONFIG_PREBOOT="run load_logo"
 # CONFIG_CONSOLE_MUX is not set
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_AVB_VERIFY=y
 # CONFIG_CMD_BDI is not set
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ABOOTIMG=y
 # CONFIG_CMD_IMI is not set
+CONFIG_CMD_BCB=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 # CONFIG_CMD_LOADS is not set
@@ -31,6 +35,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_BMP=y
 CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_AVB=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -83,4 +88,5 @@ CONFIG_VIDEO_BMP_RLE8=y
 CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y
+CONFIG_LIBAVB=y
 CONFIG_OF_LIBFDT_OVERLAY=y

+ 2 - 0
include/configs/meson64.h

@@ -32,7 +32,9 @@
 #define CONFIG_CPU_ARMV8
 #define CONFIG_REMAKE_ELF
 #define CONFIG_SYS_MAXARGS		32
+#ifndef CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SYS_MALLOC_LEN		(32 << 20)
+#endif
 #define CONFIG_SYS_CBSIZE		1024
 
 #define CONFIG_SYS_SDRAM_BASE		0

+ 181 - 34
include/configs/meson64_android.h

@@ -9,10 +9,134 @@
 #ifndef __MESON64_ANDROID_CONFIG_H
 #define __MESON64_ANDROID_CONFIG_H
 
+#include <linux/sizes.h>
+
+#define CONFIG_SYS_MALLOC_LEN	       SZ_128M
+
+#ifndef BOOT_PARTITION
+#define BOOT_PARTITION "boot"
+#endif
+
+#ifndef LOGO_PARTITION
+#define LOGO_PARTITION "logo"
+#endif
+
+#ifndef CONTROL_PARTITION
+#define CONTROL_PARTITION "misc"
+#endif
+
+#if defined(CONFIG_CMD_AVB)
+#define AVB_VERIFY_CHECK \
+	"if test \"${force_avb}\" -eq 1; then " \
+		"if run avb_verify; then " \
+			"echo AVB verification OK.;" \
+			"setenv bootargs \"$bootargs $avb_bootargs\";" \
+		"else " \
+			"echo AVB verification failed.;" \
+		"exit; fi;" \
+	"else " \
+		"setenv bootargs \"$bootargs androidboot.verifiedbootstate=orange\";" \
+		"echo Running without AVB...; "\
+	"fi;"
+
+#define AVB_VERIFY_CMD "avb_verify=avb init ${mmcdev}; avb verify $slot_suffix;\0"
+#else
+#define AVB_VERIFY_CHECK ""
+#define AVB_VERIFY_CMD ""
+#endif
+
+#if defined(CONFIG_CMD_AB_SELECT)
+#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD "get_current_slot=" \
+	"if part number mmc ${mmcdev} " CONTROL_PARTITION " control_part_number; " \
+	"then " \
+		"echo " CONTROL_PARTITION \
+			" partition number:${control_part_number};" \
+		"ab_select current_slot mmc ${mmcdev}:${control_part_number};" \
+	"else " \
+		"echo " CONTROL_PARTITION " partition not found;" \
+	"fi;\0"
+
+#define AB_SELECT_SLOT \
+	"run get_current_slot; " \
+	"if test -e \"${current_slot}\"; " \
+	"then " \
+		"setenv slot_suffix _${current_slot}; " \
+	"else " \
+		"echo current_slot not found;" \
+		"exit;" \
+	"fi;"
+
+#define AB_SELECT_ARGS \
+	"setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \
+	"echo A/B cmdline addition: ${bootargs_ab};" \
+	"setenv bootargs ${bootargs} ${bootargs_ab};"
+
+#define AB_BOOTARGS " androidboot.force_normal_boot=1"
+#define RECOVERY_PARTITION "boot"
+#else
+#define AB_SELECT_SLOT ""
+#define AB_SELECT_ARGS " "
+#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD ""
+#define AB_BOOTARGS " "
+#define RECOVERY_PARTITION "recovery"
+#endif
+
+#if defined(CONFIG_CMD_ABOOTIMG)
+/*
+ * Prepares complete device tree blob for current board (for Android boot).
+ *
+ * Boot image or recovery image should be loaded into $loadaddr prior to running
+ * these commands. The logic of these commnads is next:
+ *
+ *   1. Read correct DTB for current SoC/board from boot image in $loadaddr
+ *      to $fdtaddr
+ *   2. Merge all needed DTBO for current board from 'dtbo' partition into read
+ *      DTB
+ *   3. User should provide $fdtaddr as 3rd argument to 'bootm'
+ */
+#define PREPARE_FDT \
+	"echo Preparing FDT...; " \
+	"if test $board_name = sei510; then " \
+		"echo \"  Reading DTB for sei510...\"; " \
+		"setenv dtb_index 0;" \
+	"elif test $board_name = sei610; then " \
+		"echo \"  Reading DTB for sei610...\"; " \
+		"setenv dtb_index 1;" \
+	"else " \
+		"echo Error: Android boot is not supported for $board_name; " \
+		"exit; " \
+	"fi; " \
+	"abootimg get dtb --index=$dtb_index dtb_start dtb_size; " \
+	"cp.b $dtb_start $fdt_addr_r $dtb_size; " \
+	"fdt addr $fdt_addr_r  0x80000; " \
+	"if test $board_name = sei510; then " \
+		"echo \"  Reading DTBO for sei510...\"; " \
+		"setenv dtbo_index 0;" \
+	"elif test $board_name = sei610; then " \
+		"echo \"  Reading DTBO for sei610...\"; " \
+		"setenv dtbo_index 1;" \
+	"else " \
+		"echo Error: Android boot is not supported for $board_name; " \
+		"exit; " \
+	"fi; " \
+	"part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \
+	"part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \
+	"mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \
+	"echo \"  Applying DTBOs...\"; " \
+	"adtimg addr $dtboaddr; " \
+	"adtimg get dt --index=$dtbo_index dtbo0_addr; " \
+	"fdt apply $dtbo0_addr;" \
+	"setenv bootargs \"$bootargs androidboot.dtbo_idx=$dtbo_index \";"\
+
+#define BOOT_CMD "bootm ${loadaddr} ${loadaddr} ${fdt_addr_r};"
+
+#else
+#define PREPARE_FDT " "
+#define BOOT_CMD "bootm ${loadaddr};"
+#endif
 
 #define BOOTENV_DEV_FASTBOOT(devtypeu, devtypel, instance) \
 	"bootcmd_fastboot=" \
-		"sm reboot_reason reason;" \
 		"setenv run_fastboot 0;" \
 		"if test \"${boot_source}\" = \"usb\"; then " \
 			"echo Fastboot forced by usb rom boot;" \
@@ -23,41 +147,45 @@
 			"echo Broken MMC partition scheme;" \
 			"setenv run_fastboot 1;" \
 		"fi;" \
-		"if test \"${reason}\" = \"bootloader\" -o " \
-			"\"${reason}\" = \"fastboot\"; then " \
-			"echo Fastboot asked by reboot reason;" \
-			"setenv run_fastboot 1;" \
-		"fi;" \
-		"if test \"${skip_fastboot}\" -eq 1; then " \
-			"echo Fastboot skipped by environment;" \
-			"setenv run_fastboot 0;" \
-		"fi;" \
-		"if test \"${force_fastboot}\" -eq 1; then " \
-			"echo Fastboot forced by environment;" \
-			"setenv run_fastboot 1;" \
+		"if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \
+		CONTROL_PARTITION "; then " \
+			"if bcb test command = bootonce-bootloader; then " \
+				"echo BCB: Bootloader boot...; " \
+				"bcb clear command; bcb store; " \
+				"setenv run_fastboot 1;" \
+			"fi; " \
+			"if bcb test command = boot-fastboot; then " \
+				"echo BCB: fastboot userspace boot...; " \
+				"setenv force_recovery 1;" \
+			"fi; " \
+		"else " \
+			"echo Warning: BCB is corrupted or does not exist; " \
 		"fi;" \
 		"if test \"${run_fastboot}\" -eq 1; then " \
 			"echo Running Fastboot...;" \
-			"fastboot 0;" \
+			"fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
 		"fi\0"
 
 #define BOOTENV_DEV_NAME_FASTBOOT(devtypeu, devtypel, instance)	\
 		"fastboot "
 
-/* TOFIX: Run actual recovery instead of fastboot */
 #define BOOTENV_DEV_RECOVERY(devtypeu, devtypel, instance) \
 	"bootcmd_recovery=" \
 		"pinmux dev pinctrl@14;" \
 		"pinmux dev pinctrl@40;" \
-		"sm reboot_reason reason;" \
 		"setenv run_recovery 0;" \
 		"if run check_button; then " \
 			"echo Recovery button is pressed;" \
 			"setenv run_recovery 1;" \
-		"elif test \"${reason}\" = \"recovery\" -o " \
-			  "\"${reason}\" = \"update\"; then " \
-			"echo Recovery asked by reboot reason;" \
-			"setenv run_recovery 1;" \
+		"fi; " \
+		"if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \
+		CONTROL_PARTITION "; then " \
+			"if bcb test command = boot-recovery; then " \
+				"echo BCB: Recovery boot...; " \
+				"setenv run_recovery 1;" \
+			"fi;" \
+		"else " \
+			"echo Warning: BCB is corrupted or does not exist; " \
 		"fi;" \
 		"if test \"${skip_recovery}\" -eq 1; then " \
 			"echo Recovery skipped by environment;" \
@@ -69,7 +197,20 @@
 		"fi;" \
 		"if test \"${run_recovery}\" -eq 1; then " \
 			"echo Running Recovery...;" \
-			"fastboot 0;" \
+			"mmc dev ${mmcdev};" \
+			"setenv bootargs \"${bootargs} androidboot.serialno=${serial#}\";" \
+			AB_SELECT_SLOT \
+			AB_SELECT_ARGS \
+			AVB_VERIFY_CHECK \
+			"part start mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_start;" \
+			"part size mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_size;" \
+			"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
+				PREPARE_FDT \
+				"echo Running Android Recovery...;" \
+				BOOT_CMD \
+			"fi;" \
+			"echo Failed to boot Android...;" \
+			"reset;" \
 		"fi\0"
 
 #define BOOTENV_DEV_NAME_RECOVERY(devtypeu, devtypel, instance)	\
@@ -77,14 +218,19 @@
 
 #define BOOTENV_DEV_SYSTEM(devtypeu, devtypel, instance) \
 	"bootcmd_system=" \
-		"echo Loading Android boot partition...;" \
+		"echo Loading Android " BOOT_PARTITION " partition...;" \
 		"mmc dev ${mmcdev};" \
-		"setenv bootargs ${bootargs} console=${console} androidboot.serialno=${serial#};" \
-		"part start mmc ${mmcdev} ${bootpart} boot_start;" \
-		"part size mmc ${mmcdev} ${bootpart} boot_size;" \
+		"setenv bootargs ${bootargs} androidboot.serialno=${serial#};" \
+		AB_SELECT_SLOT \
+		AB_SELECT_ARGS \
+		AVB_VERIFY_CHECK \
+		"part start mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_start;" \
+		"part size mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_size;" \
 		"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
+			PREPARE_FDT \
+			"setenv bootargs \"${bootargs} " AB_BOOTARGS "\"  ; " \
 			"echo Running Android...;" \
-			"bootm ${loadaddr};" \
+			BOOT_CMD \
 		"fi;" \
 		"echo Failed to boot Android...;" \
 		"reset\0"
@@ -101,8 +247,8 @@
 	"if test \"${boot_source}\" != \"usb\" && " \
 		"gpt verify mmc ${mmcdev} ${partitions}; then; " \
 		"mmc dev ${mmcdev};" \
-		"part start mmc ${mmcdev} ${logopart} boot_start;" \
-		"part size mmc ${mmcdev} ${logopart} boot_size;" \
+		"part start mmc ${mmcdev} " LOGO_PARTITION " boot_start;" \
+		"part size mmc ${mmcdev} " LOGO_PARTITION " boot_size;" \
 		"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
 			"bmp display ${loadaddr} m m;" \
 		"fi;" \
@@ -111,23 +257,24 @@
 #define CONFIG_EXTRA_ENV_SETTINGS                                     \
 	"partitions=" PARTS_DEFAULT "\0"                              \
 	"mmcdev=2\0"                                                  \
-	"bootpart=1\0"                                                \
-	"logopart=2\0"                                                \
+	ANDROIDBOOT_GET_CURRENT_SLOT_CMD                              \
+	AVB_VERIFY_CMD                                                \
+	"force_avb=0\0"                                               \
 	"gpio_recovery=88\0"                                          \
 	"check_button=gpio input ${gpio_recovery};test $? -eq 0;\0"   \
 	"load_logo=" PREBOOT_LOAD_LOGO "\0"			      \
-	"console=/dev/ttyAML0\0"                                      \
-	"bootargs=no_console_suspend\0"                               \
 	"stdin=" STDIN_CFG "\0"                                       \
 	"stdout=" STDOUT_CFG "\0"                                     \
 	"stderr=" STDOUT_CFG "\0"                                     \
-	"loadaddr=0x01000000\0"                                       \
+	"dtboaddr=0x08200000\0"                                       \
+	"loadaddr=0x01080000\0"                                       \
 	"fdt_addr_r=0x01000000\0"                                     \
 	"scriptaddr=0x08000000\0"                                     \
 	"kernel_addr_r=0x01080000\0"                                  \
 	"pxefile_addr_r=0x01080000\0"                                 \
 	"ramdisk_addr_r=0x13000000\0"                                 \
-	"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" BOOTENV
+	"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"        \
+	BOOTENV
 
 #include <configs/meson64.h>
 

+ 11 - 12
include/configs/sei510.h

@@ -10,20 +10,19 @@
 #define __CONFIG_H
 
 #define LOGO_UUID "43a3305d-150f-4cc9-bd3b-38fca8693846;"
-#define CACHE_UUID "99207ae6-5207-11e9-999e-6f77a3612069;"
-#define SYSTEM_UUID "99f9b7ac-5207-11e9-8507-c3c037e393f3;"
-#define VENDOR_UUID "9d082802-5207-11e9-954c-cbbce08ba108;"
-#define USERDATA_UUID "9b976e42-5207-11e9-8f16-ff47ac594b22;"
 #define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
 
-#define PARTS_DEFAULT                                        \
-	"uuid_disk=${uuid_gpt_disk};"  			\
-	"name=boot,size=64M,bootable,uuid=${uuid_gpt_boot};" \
-	"name=logo,size=2M,uuid=" LOGO_UUID             \
-	"name=cache,size=256M,uuid=" CACHE_UUID             \
-	"name=system,size=1536M,uuid=" SYSTEM_UUID           \
-	"name=vendor,size=256M,uuid=" VENDOR_UUID            \
-	"name=userdata,size=5341M,uuid=" USERDATA_UUID	\
+#define PARTS_DEFAULT \
+	"uuid_disk=${uuid_gpt_disk};" \
+	"name=logo,size=2M,uuid=" LOGO_UUID \
+	"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
+	"name=dtbo,size=8M,uuid=${uuid_gpt_dtbo};" \
+	"name=vbmeta,size=64K,uuid=${uuid_gpt_vbmeta};" \
+	"name=boot,size=32M,bootable,uuid=${uuid_gpt_boot};" \
+	"name=recovery,size=32M,uuid=${uuid_gpt_recovery};" \
+	"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
+	"name=super,size=2304M,uuid=${uuid_gpt_super};" \
+	"name=userdata,size=4820M,uuid=${uuid_gpt_userdata};" \
 	"name=rootfs,size=-,uuid=" ROOT_UUID
 
 

+ 12 - 13
include/configs/sei610.h

@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Configuration for the SEI510
+ * Configuration for the SEI610
  *
  * Copyright (C) 2019 Baylibre, SAS
  * Author: Jerome Brunet <jbrunet@baylibre.com>
@@ -10,20 +10,19 @@
 #define __CONFIG_H
 
 #define LOGO_UUID "43a3305d-150f-4cc9-bd3b-38fca8693846;"
-#define CACHE_UUID "99207ae6-5207-11e9-999e-6f77a3612069;"
-#define SYSTEM_UUID "99f9b7ac-5207-11e9-8507-c3c037e393f3;"
-#define VENDOR_UUID "9d082802-5207-11e9-954c-cbbce08ba108;"
-#define USERDATA_UUID "9b976e42-5207-11e9-8f16-ff47ac594b22;"
 #define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
 
-#define PARTS_DEFAULT                                        \
-	"uuid_disk=${uuid_gpt_disk};"  			\
-	"name=boot,size=64M,bootable,uuid=${uuid_gpt_boot};" \
-	"name=logo,size=2M,uuid=" LOGO_UUID             \
-	"name=cache,size=256M,uuid=" CACHE_UUID             \
-	"name=system,size=1536M,uuid=" SYSTEM_UUID           \
-	"name=vendor,size=256M,uuid=" VENDOR_UUID            \
-	"name=userdata,size=12795M,uuid=" USERDATA_UUID	\
+#define PARTS_DEFAULT \
+	"uuid_disk=${uuid_gpt_disk};" \
+	"name=logo,start=512K,size=2M,uuid=" LOGO_UUID \
+	"name=misc,size=512K,uuid=${uuid_gpt_misc};" \
+	"name=dtbo,size=8M,uuid=${uuid_gpt_dtbo};" \
+	"name=vbmeta,size=512K,uuid=${uuid_gpt_vbmeta};" \
+	"name=boot,size=32M,bootable,uuid=${uuid_gpt_boot};" \
+	"name=recovery,size=32M,uuid=${uuid_gpt_recovery};" \
+	"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
+	"name=super,size=2304M,uuid=${uuid_gpt_super};" \
+	"name=userdata,size=12274M,uuid=${uuid_gpt_userdata};" \
 	"name=rootfs,size=-,uuid=" ROOT_UUID
 
 #include <configs/meson64_android.h>