|
@@ -0,0 +1,744 @@
|
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
+/*
|
|
|
+ * Copyright (c) 2022 Hardkernel Co., Ltd.
|
|
|
+ *
|
|
|
+ */
|
|
|
+
|
|
|
+/dts-v1/;
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/leds/common.h>
|
|
|
+#include <dt-bindings/pinctrl/rockchip.h>
|
|
|
+#include <dt-bindings/soc/rockchip,vop2.h>
|
|
|
+#include "rk3568.dtsi"
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "Hardkernel ODROID-M1";
|
|
|
+ compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ ethernet0 = &gmac0;
|
|
|
+ i2c0 = &i2c3;
|
|
|
+ i2c3 = &i2c0;
|
|
|
+ mmc0 = &sdhci;
|
|
|
+ mmc1 = &sdmmc0;
|
|
|
+ serial0 = &uart1;
|
|
|
+ serial1 = &uart0;
|
|
|
+ };
|
|
|
+
|
|
|
+ chosen {
|
|
|
+ stdout-path = "serial2:1500000n8";
|
|
|
+ };
|
|
|
+
|
|
|
+ dc_12v: dc-12v-regulator {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "dc_12v";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <12000000>;
|
|
|
+ regulator-max-microvolt = <12000000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ hdmi-con {
|
|
|
+ compatible = "hdmi-connector";
|
|
|
+ type = "a";
|
|
|
+
|
|
|
+ port {
|
|
|
+ hdmi_con_in: endpoint {
|
|
|
+ remote-endpoint = <&hdmi_out_con>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ ir-receiver {
|
|
|
+ compatible = "gpio-ir-receiver";
|
|
|
+ gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&ir_receiver_pin>;
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ led_power: led-0 {
|
|
|
+ gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
|
+ function = LED_FUNCTION_POWER;
|
|
|
+ color = <LED_COLOR_ID_RED>;
|
|
|
+ default-state = "keep";
|
|
|
+ linux,default-trigger = "default-on";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&led_power_pin>;
|
|
|
+ };
|
|
|
+ led_work: led-1 {
|
|
|
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
|
+ function = LED_FUNCTION_HEARTBEAT;
|
|
|
+ color = <LED_COLOR_ID_BLUE>;
|
|
|
+ linux,default-trigger = "heartbeat";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&led_work_pin>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ rk809-sound {
|
|
|
+ compatible = "simple-audio-card";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&hp_det_pin>;
|
|
|
+ simple-audio-card,name = "Analog RK817";
|
|
|
+ simple-audio-card,format = "i2s";
|
|
|
+ simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
|
+ simple-audio-card,mclk-fs = <256>;
|
|
|
+ simple-audio-card,widgets =
|
|
|
+ "Headphone", "Headphones",
|
|
|
+ "Speaker", "Speaker";
|
|
|
+ simple-audio-card,routing =
|
|
|
+ "Headphones", "HPOL",
|
|
|
+ "Headphones", "HPOR",
|
|
|
+ "Speaker", "SPKO";
|
|
|
+
|
|
|
+ simple-audio-card,cpu {
|
|
|
+ sound-dai = <&i2s1_8ch>;
|
|
|
+ };
|
|
|
+
|
|
|
+ simple-audio-card,codec {
|
|
|
+ sound-dai = <&rk809>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc3v3_pcie";
|
|
|
+ enable-active-high;
|
|
|
+ gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vcc3v3_pcie_en_pin>;
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ startup-delay-us = <5000>;
|
|
|
+ vin-supply = <&vcc3v3_sys>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v3_sys: vcc3v3-sys-regulator {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc3v3_sys";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ vin-supply = <&dc_12v>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc5v0_sys: vcc5v0-sys-regulator {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc5v0_sys";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <5000000>;
|
|
|
+ regulator-max-microvolt = <5000000>;
|
|
|
+ vin-supply = <&dc_12v>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc5v0_usb_host";
|
|
|
+ enable-active-high;
|
|
|
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
|
|
|
+ regulator-min-microvolt = <5000000>;
|
|
|
+ regulator-max-microvolt = <5000000>;
|
|
|
+ vin-supply = <&vcc5v0_sys>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc5v0_usb_otg";
|
|
|
+ enable-active-high;
|
|
|
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
|
|
|
+ regulator-min-microvolt = <5000000>;
|
|
|
+ regulator-max-microvolt = <5000000>;
|
|
|
+ vin-supply = <&vcc5v0_sys>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&combphy0 {
|
|
|
+ /* Used for USB3 */
|
|
|
+ phy-supply = <&vcc5v0_usb_host>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&combphy1 {
|
|
|
+ /* Used for USB3 */
|
|
|
+ phy-supply = <&vcc5v0_usb_otg>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&combphy2 {
|
|
|
+ /* used for SATA */
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&cpu0 {
|
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu1 {
|
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu2 {
|
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu3 {
|
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
|
+};
|
|
|
+
|
|
|
+&gmac0 {
|
|
|
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
|
|
+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
|
|
+ assigned-clock-rates = <0>, <125000000>;
|
|
|
+ clock_in_out = "output";
|
|
|
+ phy-handle = <&rgmii_phy0>;
|
|
|
+ phy-mode = "rgmii";
|
|
|
+ phy-supply = <&vcc3v3_sys>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&gmac0_miim
|
|
|
+ &gmac0_tx_bus2
|
|
|
+ &gmac0_rx_bus2
|
|
|
+ &gmac0_rgmii_clk
|
|
|
+ &gmac0_rgmii_bus>;
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ tx_delay = <0x4f>;
|
|
|
+ rx_delay = <0x2d>;
|
|
|
+};
|
|
|
+
|
|
|
+&gpu {
|
|
|
+ mali-supply = <&vdd_gpu>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&hdmi {
|
|
|
+ avdd-0v9-supply = <&vdda0v9_image>;
|
|
|
+ avdd-1v8-supply = <&vcca1v8_image>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&hdmi_in {
|
|
|
+ hdmi_in_vp0: endpoint {
|
|
|
+ remote-endpoint = <&vp0_out_hdmi>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&hdmi_out {
|
|
|
+ hdmi_out_con: endpoint {
|
|
|
+ remote-endpoint = <&hdmi_con_in>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&hdmi_sound {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&i2c0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ vdd_cpu: regulator@1c {
|
|
|
+ compatible = "tcs,tcs4525";
|
|
|
+ reg = <0x1c>;
|
|
|
+ fcs,suspend-voltage-selector = <1>;
|
|
|
+ regulator-name = "vdd_cpu";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <800000>;
|
|
|
+ regulator-max-microvolt = <1150000>;
|
|
|
+ regulator-ramp-delay = <2300>;
|
|
|
+ vin-supply = <&vcc3v3_sys>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ rk809: pmic@20 {
|
|
|
+ compatible = "rockchip,rk809";
|
|
|
+ reg = <0x20>;
|
|
|
+ interrupt-parent = <&gpio0>;
|
|
|
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
|
+ assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
|
+ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
|
|
+ #clock-cells = <1>;
|
|
|
+ clock-names = "mclk";
|
|
|
+ clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
|
|
|
+ rockchip,system-power-controller;
|
|
|
+ #sound-dai-cells = <0>;
|
|
|
+ vcc1-supply = <&vcc3v3_sys>;
|
|
|
+ vcc2-supply = <&vcc3v3_sys>;
|
|
|
+ vcc3-supply = <&vcc3v3_sys>;
|
|
|
+ vcc4-supply = <&vcc3v3_sys>;
|
|
|
+ vcc5-supply = <&vcc3v3_sys>;
|
|
|
+ vcc6-supply = <&vcc3v3_sys>;
|
|
|
+ vcc7-supply = <&vcc3v3_sys>;
|
|
|
+ vcc8-supply = <&vcc3v3_sys>;
|
|
|
+ vcc9-supply = <&vcc3v3_sys>;
|
|
|
+ wakeup-source;
|
|
|
+
|
|
|
+ regulators {
|
|
|
+ vdd_logic: DCDC_REG1 {
|
|
|
+ regulator-name = "vdd_logic";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-init-microvolt = <900000>;
|
|
|
+ regulator-initial-mode = <0x2>;
|
|
|
+ regulator-min-microvolt = <500000>;
|
|
|
+ regulator-max-microvolt = <1350000>;
|
|
|
+ regulator-ramp-delay = <6001>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_gpu: DCDC_REG2 {
|
|
|
+ regulator-name = "vdd_gpu";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-init-microvolt = <900000>;
|
|
|
+ regulator-initial-mode = <0x2>;
|
|
|
+ regulator-min-microvolt = <500000>;
|
|
|
+ regulator-max-microvolt = <1350000>;
|
|
|
+ regulator-ramp-delay = <6001>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
|
+ regulator-name = "vcc_ddr";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-initial-mode = <0x2>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_npu: DCDC_REG4 {
|
|
|
+ regulator-name = "vdd_npu";
|
|
|
+ regulator-init-microvolt = <900000>;
|
|
|
+ regulator-initial-mode = <0x2>;
|
|
|
+ regulator-min-microvolt = <500000>;
|
|
|
+ regulator-max-microvolt = <1350000>;
|
|
|
+ regulator-ramp-delay = <6001>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_1v8: DCDC_REG5 {
|
|
|
+ regulator-name = "vcc_1v8";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdda0v9_image: LDO_REG1 {
|
|
|
+ regulator-name = "vdda0v9_image";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-min-microvolt = <900000>;
|
|
|
+ regulator-max-microvolt = <900000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdda_0v9: LDO_REG2 {
|
|
|
+ regulator-name = "vdda_0v9";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <900000>;
|
|
|
+ regulator-max-microvolt = <900000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdda0v9_pmu: LDO_REG3 {
|
|
|
+ regulator-name = "vdda0v9_pmu";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <900000>;
|
|
|
+ regulator-max-microvolt = <900000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <900000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vccio_acodec: LDO_REG4 {
|
|
|
+ regulator-name = "vccio_acodec";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vccio_sd: LDO_REG5 {
|
|
|
+ regulator-name = "vccio_sd";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v3_pmu: LDO_REG6 {
|
|
|
+ regulator-name = "vcc3v3_pmu";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcca_1v8: LDO_REG7 {
|
|
|
+ regulator-name = "vcca_1v8";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcca1v8_pmu: LDO_REG8 {
|
|
|
+ regulator-name = "vcca1v8_pmu";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcca1v8_image: LDO_REG9 {
|
|
|
+ regulator-name = "vcca1v8_image";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_3v3: SWITCH_REG1 {
|
|
|
+ regulator-name = "vcc_3v3";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v3_sd: SWITCH_REG2 {
|
|
|
+ regulator-name = "vcc3v3_sd";
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&i2s0_8ch {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&i2s1_8ch {
|
|
|
+ rockchip,trcm-sync-tx-only;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&mdio0 {
|
|
|
+ rgmii_phy0: ethernet-phy@0 {
|
|
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
|
+ reg = <0x0>;
|
|
|
+ reset-assert-us = <20000>;
|
|
|
+ reset-deassert-us = <100000>;
|
|
|
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&pcie30phy {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pcie3x2 {
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&pcie_reset_pin>;
|
|
|
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
|
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pinctrl {
|
|
|
+ fspi {
|
|
|
+ fspi_dual_io_pins: fspi-dual-io-pins {
|
|
|
+ rockchip,pins =
|
|
|
+ /* fspi_clk */
|
|
|
+ <1 RK_PD0 1 &pcfg_pull_none>,
|
|
|
+ /* fspi_cs0n */
|
|
|
+ <1 RK_PD3 1 &pcfg_pull_none>,
|
|
|
+ /* fspi_d0 */
|
|
|
+ <1 RK_PD1 1 &pcfg_pull_none>,
|
|
|
+ /* fspi_d1 */
|
|
|
+ <1 RK_PD2 1 &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ ir-receiver {
|
|
|
+ ir_receiver_pin: ir-receiver-pin {
|
|
|
+ /* external pullup to VCC3V3_SYS */
|
|
|
+ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ led_power_pin: led-power-pin {
|
|
|
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ led_work_pin: led-work-pin {
|
|
|
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ pcie {
|
|
|
+ pcie_reset_pin: pcie-reset-pin {
|
|
|
+ rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
|
|
|
+ rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ pmic {
|
|
|
+ pmic_int_l: pmic-int-l {
|
|
|
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ rk809 {
|
|
|
+ hp_det_pin: hp-det-pin {
|
|
|
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ usb {
|
|
|
+ vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
|
|
|
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
|
|
|
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&pmu_io_domains {
|
|
|
+ pmuio1-supply = <&vcc3v3_pmu>;
|
|
|
+ pmuio2-supply = <&vcc3v3_pmu>;
|
|
|
+ vccio1-supply = <&vccio_acodec>;
|
|
|
+ vccio2-supply = <&vcc_1v8>;
|
|
|
+ vccio3-supply = <&vccio_sd>;
|
|
|
+ vccio4-supply = <&vcc_1v8>;
|
|
|
+ vccio5-supply = <&vcc_3v3>;
|
|
|
+ vccio6-supply = <&vcc_3v3>;
|
|
|
+ vccio7-supply = <&vcc_3v3>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&saradc {
|
|
|
+ vref-supply = <&vcca_1v8>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sata2 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sdhci {
|
|
|
+ bus-width = <8>;
|
|
|
+ max-frequency = <200000000>;
|
|
|
+ non-removable;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
|
|
|
+ vmmc-supply = <&vcc_3v3>;
|
|
|
+ vqmmc-supply = <&vcc_1v8>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sdmmc0 {
|
|
|
+ bus-width = <4>;
|
|
|
+ cap-sd-highspeed;
|
|
|
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
|
+ disable-wp;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
|
+ sd-uhs-sdr50;
|
|
|
+ vmmc-supply = <&vcc3v3_sd>;
|
|
|
+ vqmmc-supply = <&vccio_sd>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sfc {
|
|
|
+ /* Dual I/O mode as the D2 pin conflicts with the eMMC */
|
|
|
+ pinctrl-0 = <&fspi_dual_io_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ flash@0 {
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ reg = <0>;
|
|
|
+ spi-max-frequency = <100000000>;
|
|
|
+ spi-rx-bus-width = <2>;
|
|
|
+ spi-tx-bus-width = <1>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ label = "SPL";
|
|
|
+ reg = <0x0 0xe0000>;
|
|
|
+ };
|
|
|
+ partition@e0000 {
|
|
|
+ label = "U-Boot Env";
|
|
|
+ reg = <0xe0000 0x20000>;
|
|
|
+ };
|
|
|
+ partition@100000 {
|
|
|
+ label = "U-Boot";
|
|
|
+ reg = <0x100000 0x200000>;
|
|
|
+ };
|
|
|
+ partition@300000 {
|
|
|
+ label = "splash";
|
|
|
+ reg = <0x300000 0x100000>;
|
|
|
+ };
|
|
|
+ partition@400000 {
|
|
|
+ label = "Filesystem";
|
|
|
+ reg = <0x400000 0xc00000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&tsadc {
|
|
|
+ rockchip,hw-tshut-mode = <1>;
|
|
|
+ rockchip,hw-tshut-polarity = <0>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&uart2 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host0_ehci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host0_ohci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host0_xhci {
|
|
|
+ dr_mode = "host";
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host1_ehci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host1_ohci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host1_xhci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2phy0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2phy0_host {
|
|
|
+ phy-supply = <&vcc5v0_usb_host>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2phy0_otg {
|
|
|
+ phy-supply = <&vcc5v0_usb_otg>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2phy1 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2phy1_host {
|
|
|
+ phy-supply = <&vcc5v0_usb_host>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2phy1_otg {
|
|
|
+ phy-supply = <&vcc5v0_usb_host>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&vop {
|
|
|
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
|
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&vop_mmu {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&vp0 {
|
|
|
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
|
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
|
+ remote-endpoint = <&hdmi_in_vp0>;
|
|
|
+ };
|
|
|
+};
|