|
@@ -48,9 +48,10 @@ Two RK3036 boards are supported:
|
|
|
- EVB RK3036 - use evb-rk3036 configuration
|
|
|
- Kylin - use kylin_rk3036 configuration
|
|
|
|
|
|
-One RK3328 board is supported:
|
|
|
+Two RK3328 board are supported:
|
|
|
|
|
|
- - EVB RK3328
|
|
|
+ - EVB RK3328 - use evb-rk3328_defconfig
|
|
|
+ - Pine64 Rock64 board - use rock64-rk3328_defconfig
|
|
|
|
|
|
Size RK3399 boards are supported (aarch64):
|
|
|
|
|
@@ -310,6 +311,31 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out
|
|
|
truncate -s %2048 u-boot.bin
|
|
|
cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
|
|
|
|
|
|
+Booting from an SD card on Pine64 Rock64 (RK3328)
|
|
|
+=================================================
|
|
|
+
|
|
|
+For Rock64 rk3328 board the following three parts are required:
|
|
|
+TPL, SPL, and the u-boot image tree blob. While u-boot-spl.bin and
|
|
|
+u-boot.itb are to be compiled as usual, TPL is currently not
|
|
|
+implemented in u-boot, so you need to pick one from rkbin:
|
|
|
+
|
|
|
+ - Get the rkbin
|
|
|
+
|
|
|
+ => git clone https://github.com/rockchip-linux/rkbin.git
|
|
|
+
|
|
|
+ - Create TPL/SPL image
|
|
|
+
|
|
|
+ => tools/mkimage -n rk3328 -T rksd -d rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
|
|
|
+ => cat spl/u-boot-spl.bin >> idbloader.img
|
|
|
+
|
|
|
+ - Write TPL/SPL image at 64 sector
|
|
|
+
|
|
|
+ => sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64
|
|
|
+
|
|
|
+ - Write u-boot image tree blob at 16384 sector
|
|
|
+
|
|
|
+ => sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384
|
|
|
+
|
|
|
Booting from an SD card on RK3399
|
|
|
=================================
|
|
|
|