|
@@ -379,24 +379,19 @@ Booting SeaBIOS is done via U-Boot's bootelf command, like below::
|
|
|
Using e1000#0 device
|
|
|
TFTP from server 10.10.0.100; our IP address is 10.10.0.108
|
|
|
...
|
|
|
- Bytes transferred = 122124 (1dd0c hex)
|
|
|
- ## Starting application at 0x000ff06e ...
|
|
|
- SeaBIOS (version rel-1.9.0)
|
|
|
+ Bytes transferred = 128748 (1f6ec hex)
|
|
|
+ ## Starting application at 0x000fd269 ...
|
|
|
+ SeaBIOS (version rel-1.14.0-0-g155821a)
|
|
|
...
|
|
|
|
|
|
-bios.bin.elf is the SeaBIOS image built from SeaBIOS source tree.
|
|
|
-Make sure it is built as follows::
|
|
|
-
|
|
|
- $ make menuconfig
|
|
|
-
|
|
|
-Inside the "General Features" menu, select "Build for coreboot" as the
|
|
|
-"Build Target". Inside the "Debugging" menu, turn on "Serial port debugging"
|
|
|
-so that we can see something as soon as SeaBIOS boots. Leave other options
|
|
|
-as in their default state. Then::
|
|
|
+bios.bin.elf is the SeaBIOS image built from SeaBIOS source tree. At the time
|
|
|
+being, SeaBIOS release 1.14.0 has been tested. To build the SeaBIOS image::
|
|
|
|
|
|
+ $ echo -e 'CONFIG_COREBOOT=y\nCONFIG_COREBOOT_FLASH=n\nCONFIG_DEBUG_SERIAL=y\nCONFIG_DEBUG_COREBOOT=n' > .config
|
|
|
+ $ make olddefconfig
|
|
|
$ make
|
|
|
...
|
|
|
- Total size: 121888 Fixed: 66496 Free: 9184 (used 93.0% of 128KiB rom)
|
|
|
+ Total size: 128512 Fixed: 69216 Free: 2560 (used 98.0% of 128KiB rom)
|
|
|
Creating out/bios.bin.elf
|
|
|
|
|
|
Currently this is tested on QEMU x86 target with U-Boot chain-loading SeaBIOS
|