|
@@ -99,13 +99,13 @@ To write an image that boots from an SD card (assumed to be /dev/sdc):
|
|
|
./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \
|
|
|
firefly-rk3288/spl/u-boot-spl-dtb.bin out && \
|
|
|
sudo dd if=out of=/dev/sdc seek=64 && \
|
|
|
- sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=256
|
|
|
+ sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=16384
|
|
|
|
|
|
This puts the Rockchip header and SPL image first and then places the U-Boot
|
|
|
-image at block 256 (i.e. 128KB from the start of the SD card). This
|
|
|
+image at block 16384 (i.e. 4MB from the start of the SD card). This
|
|
|
corresponds with this setting in U-Boot:
|
|
|
|
|
|
- #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
|
|
|
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x4000
|
|
|
|
|
|
Put this SD (or micro-SD) card into your board and reset it. You should see
|
|
|
something like:
|