ソースを参照

Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005

Wolfgang Denk 19 年 前
コミット
6bdf430660

+ 3 - 0
CHANGELOG

@@ -2,6 +2,9 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
+  Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
+
 * Check return value of malloc in 440gx_enet.c
   Patch by Travis B. Sawyer, 18 Jul 2005
 

+ 3 - 1
CREDITS

@@ -29,6 +29,7 @@ D: ERIC Support
 N: Pantelis Antoniou
 E: panto@intracom.gr
 D: NETVIA & NETPHONE board support, ARTOS support.
+D: Support for Silicon Turnkey eXpress XTc
 
 N: Pierre Aubert
 E: <p.aubert@staubli.com>
@@ -268,8 +269,9 @@ E: lo@routefree.com
 D: Support for DOS partitions
 
 N: Dan Malek
-E: dan@netx4.com
+E: dan@embeddedalley.com
 D: FADSROM, the grandfather of all of this
+D: Support for Silicon Turnkey eXpress XTc
 
 N: Andrea "llandre" Marson
 E: andrea.marson@dave-tech.it

+ 1 - 0
MAINTAINERS

@@ -215,6 +215,7 @@ Jon Loeliger <jdl@freescale.com>
 Dan Malek <dan@embeddededge.com>
 
 	STxGP3			MPC85xx
+	STxXTc			MPC8xx
 
 Eran Man <eran@nbase.co.il>
 

+ 3 - 0
Makefile

@@ -644,6 +644,9 @@ SM850_config	:	unconfig
 SPD823TS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx spd8xx
 
+stxxtc_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx stxxtc
+
 svm_sc8xx_config:	unconfig
 	@ >include/config.h
 	@./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx

+ 40 - 0
board/stxxtc/Makefile

@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

+ 28 - 0
board/stxxtc/config.mk

@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# STx XTc
+#
+
+TEXT_BASE = 0x40F00000

+ 638 - 0
board/stxxtc/stxxtc.c

@@ -0,0 +1,638 @@
+/*
+ * (C) Copyright 2000-2004
+ * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2005
+ * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * U-Boot port on STx XTc board
+ * Mostly copied from Netta
+ */
+
+#include <common.h>
+#include <miiphy.h>
+
+#include "mpc8xx.h"
+
+#ifdef CONFIG_HW_WATCHDOG
+#include <watchdog.h>
+#endif
+
+/****************************************************************/
+
+/* some sane bit macros */
+#define _BD(_b)				(1U << (31-(_b)))
+#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
+
+#define _BW(_b)				(1U << (15-(_b)))
+#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
+
+#define _BB(_b)				(1U << (7-(_b)))
+#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
+
+#define _B(_b)				_BD(_b)
+#define _BR(_l, _h)			_BDR(_l, _h)
+
+/****************************************************************/
+
+/*
+ * Check Board Identity:
+ *
+ * Return 1 always.
+ */
+
+int checkboard(void)
+{
+	printf ("Silicon Turnkey eXpress XTc\n");
+	return (0);
+}
+
+/****************************************************************/
+
+#define _NOT_USED_	0xFFFFFFFF
+
+/****************************************************************/
+
+#define CS_0000		0x00000000
+#define CS_0001		0x10000000
+#define CS_0010		0x20000000
+#define CS_0011		0x30000000
+#define CS_0100		0x40000000
+#define CS_0101		0x50000000
+#define CS_0110		0x60000000
+#define CS_0111		0x70000000
+#define CS_1000		0x80000000
+#define CS_1001		0x90000000
+#define CS_1010		0xA0000000
+#define CS_1011		0xB0000000
+#define CS_1100		0xC0000000
+#define CS_1101		0xD0000000
+#define CS_1110		0xE0000000
+#define CS_1111		0xF0000000
+
+#define BS_0000		0x00000000
+#define BS_0001		0x01000000
+#define BS_0010		0x02000000
+#define BS_0011		0x03000000
+#define BS_0100		0x04000000
+#define BS_0101		0x05000000
+#define BS_0110		0x06000000
+#define BS_0111		0x07000000
+#define BS_1000		0x08000000
+#define BS_1001		0x09000000
+#define BS_1010		0x0A000000
+#define BS_1011		0x0B000000
+#define BS_1100		0x0C000000
+#define BS_1101		0x0D000000
+#define BS_1110		0x0E000000
+#define BS_1111		0x0F000000
+
+#define GPL0_AAAA	0x00000000
+#define GPL0_AAA0	0x00200000
+#define GPL0_AAA1	0x00300000
+#define GPL0_000A	0x00800000
+#define GPL0_0000	0x00A00000
+#define GPL0_0001	0x00B00000
+#define GPL0_111A	0x00C00000
+#define GPL0_1110	0x00E00000
+#define GPL0_1111	0x00F00000
+
+#define GPL1_0000	0x00000000
+#define GPL1_0001	0x00040000
+#define GPL1_1110	0x00080000
+#define GPL1_1111	0x000C0000
+
+#define GPL2_0000	0x00000000
+#define GPL2_0001	0x00010000
+#define GPL2_1110	0x00020000
+#define GPL2_1111	0x00030000
+
+#define GPL3_0000	0x00000000
+#define GPL3_0001	0x00004000
+#define GPL3_1110	0x00008000
+#define GPL3_1111	0x0000C000
+
+#define GPL4_0000	0x00000000
+#define GPL4_0001	0x00001000
+#define GPL4_1110	0x00002000
+#define GPL4_1111	0x00003000
+
+#define GPL5_0000	0x00000000
+#define GPL5_0001	0x00000400
+#define GPL5_1110	0x00000800
+#define GPL5_1111	0x00000C00
+#define LOOP		0x00000080
+
+#define EXEN		0x00000040
+
+#define AMX_COL		0x00000000
+#define AMX_ROW		0x00000020
+#define AMX_MAR		0x00000030
+
+#define NA		0x00000008
+
+#define UTA		0x00000004
+
+#define TODT		0x00000002
+
+#define LAST		0x00000001
+
+#define A10_AAAA	GPL0_AAAA
+#define A10_AAA0	GPL0_AAA0
+#define A10_AAA1	GPL0_AAA1
+#define A10_000A	GPL0_000A
+#define A10_0000	GPL0_0000
+#define A10_0001	GPL0_0001
+#define A10_111A	GPL0_111A
+#define A10_1110	GPL0_1110
+#define A10_1111	GPL0_1111
+
+#define RAS_0000	GPL1_0000
+#define RAS_0001	GPL1_0001
+#define RAS_1110	GPL1_1110
+#define RAS_1111	GPL1_1111
+
+#define CAS_0000	GPL2_0000
+#define CAS_0001	GPL2_0001
+#define CAS_1110	GPL2_1110
+#define CAS_1111	GPL2_1111
+
+#define WE_0000		GPL3_0000
+#define WE_0001		GPL3_0001
+#define WE_1110		GPL3_1110
+#define WE_1111		GPL3_1111
+
+/* #define CAS_LATENCY	3  */
+#define CAS_LATENCY	2
+
+const uint sdram_table[0x40] = {
+
+#if CAS_LATENCY == 3
+	/* RSS */
+	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
+	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
+	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
+	_NOT_USED_, _NOT_USED_,
+
+	/* RBS */
+	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
+	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
+	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
+	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
+	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL,				/* PALL  */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST,		/* NOP	 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* WSS */
+	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
+	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
+	CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
+	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* WBS */
+	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
+	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL,				/* WRITE */
+	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+#endif
+
+#if CAS_LATENCY == 2
+	/* RSS */
+	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
+	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
+	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
+	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+	/* RBS */
+	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
+	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
+	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
+	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* WSS */
+	CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
+	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
+	CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
+	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+	_NOT_USED_,
+
+	/* WBS */
+	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
+	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
+	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL,				/* WRITE */
+	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
+	CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA,			/* NOP   */
+	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+#endif
+
+	/* UPT */
+	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP,		/* ATRFR */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP,		/* NOP   */
+	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+	/* EXC */
+	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
+	_NOT_USED_,
+
+	/* REG */
+	CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
+	CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
+};
+
+static const uint nandcs_table[0x40] = {
+	/* RSS */
+	CS_1000 | GPL4_1111 | GPL5_1111 | UTA,
+	CS_0000 | GPL4_1110 | GPL5_1111 | UTA,
+	CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
+	CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
+	CS_0000 | GPL4_0000 | GPL5_1111,
+	CS_0000 | GPL4_0001 | GPL5_1111 | UTA,
+	CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
+	CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,	/* NOP   */
+
+	/* RBS */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* WSS */
+	CS_1000 | GPL4_1111 | GPL5_1110 | UTA,
+	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
+	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
+	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
+	CS_0000 | GPL4_1111 | GPL5_0001 | UTA,
+	CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
+	CS_0000 | GPL4_1111 | GPL5_1111,
+	CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,
+
+	/* WBS */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* UPT */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,	_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,	_NOT_USED_, _NOT_USED_,
+
+	/* EXC */
+	CS_0001 | LAST,
+	_NOT_USED_,
+
+	/* REG */
+	CS_1110 ,
+	CS_0001 | LAST,
+};
+
+/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
+/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
+#define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
+
+/* 9 */
+#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+void check_ram(unsigned int addr, unsigned int size)
+{
+	unsigned int i, j, v, vv;
+	volatile unsigned int *p;
+	unsigned int pv;
+
+	p = (unsigned int *)addr;
+	pv = (unsigned int)p;
+	for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
+		*p++ = pv;
+
+	p = (unsigned int *)addr;
+	for (i = 0; i < size / sizeof(unsigned int); i++) {
+		v = (unsigned int)p;
+		vv = *p;
+		if (vv != v) {
+			printf("%p: read %08x instead of %08x\n", p, vv, v);
+			hang();
+		}
+		p++;
+	}
+
+	for (j = 0; j < 5; j++) {
+		switch (j) {
+			case 0: v = 0x00000000; break;
+			case 1: v = 0xffffffff; break;
+			case 2: v = 0x55555555; break;
+			case 3: v = 0xaaaaaaaa; break;
+			default:v = 0xdeadbeef; break;
+		}
+		p = (unsigned int *)addr;
+		for (i = 0; i < size / sizeof(unsigned int); i++) {
+			*p = v;
+			vv = *p;
+			if (vv != v) {
+				printf("%p: read %08x instead of %08x\n", p, vv, v);
+				hang();
+			}
+			*p = ~v;
+			p++;
+		}
+	}
+}
+
+#define DO_LOOP do { for (;;) asm volatile ("nop" : : : "memory"); } while(0)
+
+long int initdram(int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size;
+	u32 d1, d2;
+
+	upmconfig(UPMA, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0]));
+
+	/*
+	 * Preliminary prescaler for refresh
+	 */
+	memctl->memc_mptpr = MPTPR_PTP_DIV8;
+
+	memctl->memc_mar = MAR_SDRAM_INIT;	/* 32-bit address to be output on the address bus if AMX = 0b11 */
+
+	/*
+	 * Map controller bank 3 to the SDRAM bank at preliminary address.
+	 */
+	memctl->memc_or4 = CFG_OR4_PRELIM;
+	memctl->memc_br4 = CFG_BR4_PRELIM;
+
+	memctl->memc_mamr = CFG_MAMR & ~MAMR_PTAE;	/* no refresh yet */
+
+	udelay(200);
+
+	/* perform SDRAM initialisation sequence */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3C);	/* precharge all		*/
+	udelay(1);
+
+	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(2) | MCR_MAD(0x30);	/* refresh 2 times(0)		*/
+	udelay(1);
+
+	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3E);	/* exception program (write mar)*/
+	udelay(1);
+
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+	udelay(10000);
+
+
+	d1 = 0xAA55AA55;
+	*(volatile u32 *)0 = d1;
+	d2 = *(volatile u32 *)0;
+	if (d1 != d2) {
+		printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
+		DO_LOOP;
+	}
+
+	d1 = 0x55AA55AA;
+	*(volatile u32 *)0 = d1;
+	d2 = *(volatile u32 *)0;
+	if (d1 != d2) {
+		printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
+		DO_LOOP;
+	}
+
+	d1 = 0x12345678;
+	*(volatile u32 *)0 = d1;
+	d2 = *(volatile u32 *)0;
+	if (d1 != d2) {
+		printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
+		DO_LOOP;
+	}
+
+	size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
+
+	return size;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void reset_phys(void)
+{
+	int phyno;
+	unsigned short v;
+
+	udelay(10000);
+	/* reset the damn phys */
+	mii_init();
+
+	for (phyno = 0; phyno < 32; ++phyno) {
+		miiphy_read(phyno, PHY_PHYIDR1, &v);
+		if (v == 0xFFFF)
+			continue;
+		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_POWD);
+		udelay(10000);
+		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
+		udelay(10000);
+	}
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* GP = general purpose, SP = special purpose (on chip peripheral) */
+
+/* bits that can have a special purpose or can be configured as inputs/outputs */
+#define PA_GP_INMASK	_BW(6)
+#define PA_GP_OUTMASK	(_BW(7))
+#define PA_SP_MASK	0
+#define PA_ODR_VAL	0
+#define PA_GP_OUTVAL	(_BW(7))
+#define PA_SP_DIRVAL	0
+
+#define PB_GP_INMASK	0
+#define PB_GP_OUTMASK	(_B(23))
+#define PB_SP_MASK	0
+#define PB_ODR_VAL	0
+#define PB_GP_OUTVAL	(_B(23))
+#define PB_SP_DIRVAL	0
+
+#define PC_GP_INMASK	0
+#define PC_GP_OUTMASK	(_BW(15))
+
+#define PC_SP_MASK	0
+#define PC_SOVAL	0
+#define PC_INTVAL	0
+#define PC_GP_OUTVAL	0
+#define PC_SP_DIRVAL	0
+
+#define PE_GP_INMASK	0
+#define PE_GP_OUTMASK	0
+#define PE_GP_OUTVAL	0
+
+#define PE_SP_MASK	0
+#define PE_ODR_VAL	0
+#define PE_SP_DIRVAL	0
+
+int board_early_init_f(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile iop8xx_t *ioport = &immap->im_ioport;
+	volatile cpm8xx_t *cpm = &immap->im_cpm;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	(void)ioport;
+	(void)cpm;
+#if 1
+	/* NAND chip select */
+	upmconfig(UPMB, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0]));
+	memctl->memc_or2 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS);
+	memctl->memc_br2 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMB);
+	memctl->memc_mbmr = 0;	/* all clear */
+#endif
+
+	memctl->memc_br5 &= ~BR_V;
+	memctl->memc_br6 &= ~BR_V;
+	memctl->memc_br7 &= ~BR_V;
+
+#if 1
+	ioport->iop_padat	= PA_GP_OUTVAL;
+	ioport->iop_paodr	= PA_ODR_VAL;
+	ioport->iop_padir	= PA_GP_OUTMASK | PA_SP_DIRVAL;
+	ioport->iop_papar	= PA_SP_MASK;
+
+	cpm->cp_pbdat		= PB_GP_OUTVAL;
+	cpm->cp_pbodr		= PB_ODR_VAL;
+	cpm->cp_pbdir		= PB_GP_OUTMASK | PB_SP_DIRVAL;
+	cpm->cp_pbpar		= PB_SP_MASK;
+
+	ioport->iop_pcdat	= PC_GP_OUTVAL;
+	ioport->iop_pcdir	= PC_GP_OUTMASK | PC_SP_DIRVAL;
+	ioport->iop_pcso	= PC_SOVAL;
+	ioport->iop_pcint	= PC_INTVAL;
+	ioport->iop_pcpar	= PC_SP_MASK;
+
+	cpm->cp_pedat		= PE_GP_OUTVAL;
+	cpm->cp_peodr		= PE_ODR_VAL;
+	cpm->cp_pedir		= PE_GP_OUTMASK | PE_SP_DIRVAL;
+	cpm->cp_pepar		= PE_SP_MASK;
+#endif
+
+	return 0;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <linux/mtd/nand.h>
+
+extern ulong nand_probe(ulong physadr);
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+	unsigned long totlen;
+
+	totlen = nand_probe(CFG_NAND_BASE);
+	printf ("%4lu MB\n", totlen >> 20);
+}
+#endif
+
+#ifdef CONFIG_HW_WATCHDOG
+
+void hw_watchdog_reset(void)
+{
+	/* XXX add here the really funky stuff */
+}
+
+#endif
+
+#ifdef CONFIG_SHOW_ACTIVITY
+
+/* called from timer interrupt every 1/CFG_HZ sec */
+void board_show_activity(ulong timestamp)
+{
+}
+
+/* called when looping */
+void show_activity(int arg)
+{
+}
+
+#endif
+
+#if defined(CFG_CONSOLE_IS_IN_ENV) && defined(CFG_CONSOLE_OVERWRITE_ROUTINE)
+int overwrite_console(void)
+{
+	/* printf("overwrite_console called\n"); */
+	return 0;
+}
+#endif
+
+extern int drv_phone_init(void);
+extern int drv_phone_use_me(void);
+extern int drv_phone_is_idle(void);
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+int last_stage_init(void)
+{
+	reset_phys();
+
+	return 0;
+}

+ 138 - 0
board/stxxtc/u-boot.lds

@@ -0,0 +1,138 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp		: { *(.interp)		}
+  .hash         : { *(.hash)		}
+  .dynsym       : { *(.dynsym)		}
+  .dynstr       : { *(.dynstr)		}
+  .rel.text     : { *(.rel.text)	}
+  .rela.text    : { *(.rela.text) 	}
+  .rel.data     : { *(.rel.data)	}
+  .rela.data    : { *(.rela.data) 	}
+  .rel.rodata   : { *(.rel.rodata) 	}
+  .rela.rodata  : { *(.rela.rodata)	}
+  .rel.got      : { *(.rel.got)		}
+  .rela.got     : { *(.rela.got)	}
+  .rel.ctors    : { *(.rel.ctors)	}
+  .rela.ctors   : { *(.rela.ctors)	}
+  .rel.dtors    : { *(.rel.dtors)	}
+  .rela.dtors   : { *(.rela.dtors)	}
+  .rel.bss      : { *(.rel.bss)		}
+  .rela.bss     : { *(.rela.bss)	}
+  .rel.plt      : { *(.rel.plt)		}
+  .rela.plt     : { *(.rela.plt)	}
+  .init         : { *(.init)		}
+  .plt			: { *(.plt) 		}
+  .text      	:
+  {
+    cpu/mpc8xx/start.o		(.text)
+    cpu/mpc8xx/traps.o		(.text)
+    common/dlmalloc.o		(.text)
+    lib_ppc/ppcstring.o		(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+    lib_ppc/cache.o		(.text)
+    lib_ppc/time.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

+ 135 - 0
board/stxxtc/u-boot.lds.debug

@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o		(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

+ 59 - 0
doc/README.stxxtc

@@ -0,0 +1,59 @@
+
+
+First, some build notes on the Silicon Turnkey eXpress XTc.
+
+This board has both 87x/88x procesor options at various
+frequencies.  The configuration file has some macros for setting
+the clock speed, not all have been tested.  They all have
+a 10MHz input clock.  Please do not check in a configuration
+file that selects a high speed not available on all processors.
+We chose the 66MHz core and bus speed, which should be OK on
+all boards.  If you have a processor, lucky you! :-)
+Just build a new configuration with that speed, check
+the macro configuration to ensure it's correct.  If the
+macro is updated, please check that in, but keep default
+processor speed.
+
+The board is likely to have more than 1Mbyte of NOR boot flash.
+It was also configured with a high boot vector (Dan's fault)
+so the standard 8xx mapping doesn't work well. We had to move
+the addresses around a little bit so one copy would work.  The
+flash got fragmented, and we are working on a better solution.
+There is an "xtc.cfg" floating around for the BDI2000, use
+that for programming a new version of U-Boot.  You can probably
+find it on the Silicon Turnkey eXpress (www.silicontkx.com),
+Embedded Alley Solutions (embeddedalley.com), or Denx (denx.de)
+servers.
+
+The board will also have various SDRAM sizes, but the code
+should automatically determine the amount of memory.
+
+There are a couple of different board versions, visually
+they use different BGA or surface mount memory parts.  However,
+they are logically the same board.
+
+Now, some operational notes.
+
+The board has the option of sporting two FEC Ethernet ports.
+The second port isn't configured to be automatically available
+because it would cause U-Boot to generate a board data structure
+(the bd_t) with multiple MAC addresses and be incompatible with
+standard 8xx kernel builds.  You can use/test the second FEC
+in U-Boot by assigning an 'eth1addr' and selecting the second
+FEC as the port to use.
+
+Since this is just a development board and not a product, STx
+does not assign unique MAC addresses.  We just pilfer the
+"default" ones used by Wolfgang on some other boards.  Please
+ensure you assign unique MAC addresses when using these boards.
+
+The serial port baud rate is 38400, because that's the way
+I like it :-)
+
+Thanks to Pantelis for lots of the work on this board port.
+
+Have Fun!
+
+	-- Dan
+
+15 August 2005

+ 592 - 0
include/configs/stxxtc.h

@@ -0,0 +1,592 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com
+ * U-Boot port on STx XTc 8xx board
+ * Mostly copied from Panto's NETTA2 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC875		1	/* This is a MPC875 CPU		*/
+#define CONFIG_STXXTC		1	/* ...on a STx XTc  board	*/
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+
+#define CONFIG_BAUDRATE		38400	/* console baudrate = 38.4kbps	*/
+
+#define CONFIG_XIN		10000000	/* 10 MHz input xtal */
+
+/* Select one of few clock rates defined later in this file.
+*/
+/* #define MPC8XX_HZ		50000000 */
+#define MPC8XX_HZ		66666666
+
+#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND							\
+	"tftpboot; " 								\
+	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " 	\
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " 	\
+	"bootm"
+
+#define CONFIG_AUTOSCRIPT
+#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
+
+#define CONFIG_BOOTP_MASK		(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+
+#undef CONFIG_MAC_PARTITION
+#undef CONFIG_DOS_PARTITION
+
+#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
+
+#define	CONFIG_NET_MULTI	1 	/* the only way to get the FEC in */
+#define	FEC_ENET		1	/* eth.c needs it that way... */
+#undef CFG_DISCOVER_PHY
+#define CONFIG_MII		1
+#undef CONFIG_RMII
+
+#define CONFIG_ETHER_ON_FEC1	1
+#define CONFIG_FEC1_PHY		1 	/* phy address of FEC */
+#undef CONFIG_FEC1_PHY_NORXERR
+
+#define CONFIG_ETHER_ON_FEC2	1
+#define CONFIG_FEC2_PHY		3
+#undef CONFIG_FEC2_PHY_NORXERR
+
+#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
+
+#define CONFIG_COMMANDS       ( CONFIG_CMD_DFL	| \
+				CFG_CMD_NAND	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_PING  	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NFS)
+
+#define CONFIG_BOARD_EARLY_INIT_F	1
+#define CONFIG_MISC_INIT_R
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT	"xtc> "		/* Monitor Command Prompt	*/
+
+#define CFG_HUSH_PARSER	1
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#if defined(DEBUG)
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#else
+#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#endif
+
+/* yes this is weird, I know :) */
+#define CFG_MONITOR_BASE	(CFG_FLASH_BASE | 0x00F00000)
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+#define CFG_RESET_ADDRESS	0x80000000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SECT_SIZE	0x10000
+
+#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00000000)
+#define CFG_ENV_OFFSET		0
+#define	CFG_ENV_SIZE		0x4000
+
+#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x00010000)
+#define CFG_ENV_OFFSET_REDUND	0
+#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+
+#define CFG_FLASH_CFI		1
+#define CFG_FLASH_CFI_DRIVER	1
+#undef CFG_FLASH_USE_BUFFER_WRITE 	/* use buffered writes (20x faster) */
+#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + 0x2000000 }
+
+#define CFG_FLASH_PROTECTION
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ */
+
+#if CONFIG_XIN == 10000000
+
+#if MPC8XX_HZ == 50000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 66666666
+#define CFG_PLPRCR	((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#else
+#error unsupported CPU freq for XIN = 10MHz
+#endif
+#else
+#error unsupported freq for XIN (must be 10MHz)
+#endif
+
+
+/*
+ *-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ *
+ * Note: When TBS == 0 the timebase is independent of current cpu clock.
+ */
+
+#define SCCR_MASK	SCCR_EBDF11
+#if MPC8XX_HZ > 66666666
+#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00 | SCCR_EBDF01)
+#else
+#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+#endif
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define	CFG_DER	0x2002000F*/
+#define CFG_DER	0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0x42000000	/* FLASH bank #1	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+
+#define FLASH_BANK_MAX_SIZE	0x01000000	/* max size per chip */
+
+#define CFG_REMAP_OR_AM		0x80000000
+#define CFG_PRELIM_OR_AM	(0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1))
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+
+#define CFG_OR1_PRELIM	((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CFG_OR_TIMING_FLASH)
+#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+
+/*
+ * BR4 and OR4 (SDRAM)
+ *
+ */
+#define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+
+#define CFG_OR4_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
+#define CFG_BR4_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ *	gclk	  CPU clock (not bus clock!)
+ *	Trefresh  Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096  Rows from SDRAM example configuration
+ * 1000  factor s -> ms
+ *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
+ *    4  Number of refresh cycles per period
+ *   64  Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider =  98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ */
+
+#define CFG_MAMR_PTA		 234
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
+
+/****************************************************************/
+
+#define NAND_SIZE	0x00010000	/* 64K */
+#define NAND_BASE	0xF1000000
+
+/****************************************************************/
+
+/* NAND */
+#define CFG_NAND_BASE		NAND_BASE
+#define CONFIG_MTD_NAND_ECC_JFFS2
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_MTD_NAND_UNSAFE
+
+#define CFG_MAX_NAND_DEVICE	1
+#undef NAND_NO_RB
+
+#define SECTORSIZE		512
+#define ADDR_COLUMN		1
+#define ADDR_PAGE		2
+#define ADDR_COLUMN_PAGE	3
+#define NAND_ChipID_UNKNOWN 	0x00
+#define NAND_MAX_FLOORS		1
+#define NAND_MAX_CHIPS		1
+
+/* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */
+#define NAND_DISABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) |=  (1 << (15 - 7)); \
+	} while(0)
+
+#define NAND_ENABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \
+	} while(0)
+
+#define NAND_CTL_CLRALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \
+	} while(0)
+
+#define NAND_CTL_SETALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) |=  (1 << (15 - 15)); \
+	} while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \
+	} while(0)
+
+#define NAND_CTL_SETCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) |=  (1 << (31 - 23)); \
+	} while(0)
+
+#ifndef NAND_NO_RB
+#define NAND_WAIT_READY(nand) \
+	do { \
+		int _tries = 0; \
+		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \
+			if (++_tries > 100000) \
+				break; \
+	} while (0)
+#else
+#define NAND_WAIT_READY(nand) udelay(12)
+#endif
+
+#define WRITE_NAND_COMMAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND_ADDRESS(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define READ_NAND(adr) \
+	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
+
+/*****************************************************************************/
+
+#define CFG_DIRECT_FLASH_TFTP
+#define CFG_DIRECT_NAND_TFTP
+
+/*****************************************************************************/
+
+/* Status Leds are on the MODCK pins, which become the PCMCIA PGCRB,
+ * CxOE and CxRESET.  We use the CxOE.
+ */
+#define STATUS_LED_BIT		0x00000080		/* bit 24 */
+
+#define STATUS_LED_PERIOD	(CFG_HZ / 2)
+#define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
+#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */
+
+#ifndef __ASSEMBLY__
+
+/* LEDs */
+
+/* led_id_t is unsigned int mask */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+	do { \
+		((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \
+	} while(0)
+
+#define __led_set(_msk, _st) \
+	do { \
+		if ((_st)) \
+			((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \
+		else \
+			((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \
+	} while(0)
+
+#define __led_init(msk, st) __led_set(msk, st)
+
+#endif
+
+/******************************************************************************/
+
+#define CFG_CONSOLE_IS_IN_ENV		1
+#define CFG_CONSOLE_OVERWRITE_ROUTINE	1
+#define CFG_CONSOLE_ENV_OVERWRITE	1
+
+/******************************************************************************/
+
+/* use board specific hardware */
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_SHOW_ACTIVITY
+
+/*****************************************************************************/
+
+#define CONFIG_AUTO_COMPLETE	1
+#define CONFIG_CRC32_VERIFY	1
+#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1
+
+/* Note: change below for your network setting!!!
+ * This was done just to facilitate manufacturing test and configuration.
+ */
+#define CONFIG_ETHADDR	 00:e0:0c:07:9b:8a
+
+#define CONFIG_SERVERIP 	192.168.08.1
+#define CONFIG_IPADDR  		192.168.08.85
+#define CONFIG_GATEWAYIP	192.168.08.1
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_HOSTNAME 	stx_xtc
+#define CONFIG_ROOTPATH 	/xtcroot
+#define CONFIG_BOOTFILE 	uImage
+#define CONFIG_LOADADDR		0x1000000
+
+
+#endif	/* __CONFIG_H */

+ 3 - 0
include/status_led.h

@@ -336,6 +336,9 @@ void status_led_set  (int led, int state);
 /*****  NetPhone   ********************************************************/
 #elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
 /* XXX empty just to avoid the error */
+/*****  STx XTc    ********************************************************/
+#elif defined(CONFIG_STXXTC)
+/* XXX empty just to avoid the error */
 /*****  sbc8240   ********************************************************/
 #elif defined(CONFIG_WRSBC8240)
 /* XXX empty just to avoid the error */