Просмотр исходного кода

Merge tag 'dm-pull-18sep21' of https://source.denx.de/u-boot/custodians/u-boot-dm

Revert the public-key-embedded-in-executable patches so this does not form
part of an official release before it is agreed.
Tom Rini 2 лет назад
Родитель
Сommit
3f571228a5

+ 1 - 0
board/emulation/common/Makefile

@@ -2,3 +2,4 @@
 
 obj-$(CONFIG_SYS_MTDPARTS_RUNTIME) += qemu_mtdparts.o
 obj-$(CONFIG_SET_DFU_ALT_INFO) += qemu_dfu.o
+obj-$(CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT) += qemu_capsule.o

+ 0 - 124
doc/develop/uefi/uefi.rst

@@ -277,130 +277,6 @@ Enable ``CONFIG_OPTEE``, ``CONFIG_CMD_OPTEE_RPMB`` and ``CONFIG_EFI_MM_COMM_TEE`
 
 [1] https://optee.readthedocs.io/en/latest/building/efi_vars/stmm.html
 
-Enabling UEFI Capsule Update feature
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Support has been added for the UEFI capsule update feature which
-enables updating the U-Boot image using the UEFI firmware management
-protocol (FMP). The capsules are not passed to the firmware through
-the UpdateCapsule runtime service. Instead, capsule-on-disk
-functionality is used for fetching the capsule from the EFI System
-Partition (ESP) by placing the capsule file under the
-\EFI\UpdateCapsule directory.
-
-The directory \EFI\UpdateCapsule is checked for capsules only within the
-EFI system partition on the device specified in the active boot option
-determined by reference to BootNext variable or BootOrder variable processing.
-The active Boot Variable is the variable with highest priority BootNext or
-within BootOrder that refers to a device found to be present. Boot variables
-in BootOrder but referring to devices not present are ignored when determining
-active boot variable.
-Before starting a capsule update make sure your capsules are installed in the
-correct ESP partition or set BootNext.
-
-Performing the update
-*********************
-
-Since U-boot doesn't currently support SetVariable at runtime there's a Kconfig
-option (CONFIG_EFI_IGNORE_OSINDICATIONS) to disable the OsIndications variable
-check. If that option is enabled just copy your capsule to \EFI\UpdateCapsule.
-
-If that option is disabled, you'll need to set the OsIndications variable with::
-
-    => setenv -e -nv -bs -rt -v OsIndications =0x04
-
-Finally, the capsule update can be initiated either by rebooting the board,
-which is the preferred method, or by issuing the following command::
-
-    => efidebug capsule disk-update
-
-**The efidebug command is should only be used during debugging/development.**
-
-Enabling Capsule Authentication
-*******************************
-
-The UEFI specification defines a way of authenticating the capsule to
-be updated by verifying the capsule signature. The capsule signature
-is computed and prepended to the capsule payload at the time of
-capsule generation. This signature is then verified by using the
-public key stored as part of the X509 certificate. This certificate is
-in the form of an efi signature list (esl) file, which is embedded as
-part of U-Boot.
-
-The capsule authentication feature can be enabled through the
-following config, in addition to the configs listed above for capsule
-update::
-
-    CONFIG_EFI_CAPSULE_AUTHENTICATE=y
-    CONFIG_EFI_CAPSULE_KEY_PATH=<path to .esl cert>
-
-The public and private keys used for the signing process are generated
-and used by the steps highlighted below::
-
-    1. Install utility commands on your host
-       * OPENSSL
-       * efitools
-
-    2. Create signing keys and certificate files on your host
-
-        $ openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=CRT/ \
-            -keyout CRT.key -out CRT.crt -nodes -days 365
-        $ cert-to-efi-sig-list CRT.crt CRT.esl
-
-        $ openssl x509 -in CRT.crt -out CRT.cer -outform DER
-        $ openssl x509 -inform DER -in CRT.cer -outform PEM -out CRT.pub.pem
-
-        $ openssl pkcs12 -export -out CRT.pfx -inkey CRT.key -in CRT.crt
-        $ openssl pkcs12 -in CRT.pfx -nodes -out CRT.pem
-
-The capsule file can be generated by using the GenerateCapsule.py
-script in EDKII::
-
-    $ ./BaseTools/BinWrappers/PosixLike/GenerateCapsule -e -o \
-      <capsule_file_name> --monotonic-count <val> --fw-version \
-      <val> --lsv <val> --guid \
-      e2bb9c06-70e9-4b14-97a3-5a7913176e3f --verbose \
-      --update-image-index <val> --signer-private-cert \
-      /path/to/CRT.pem --trusted-public-cert \
-      /path/to/CRT.pub.pem --other-public-cert /path/to/CRT.pub.pem \
-      <u-boot.bin>
-
-Place the capsule generated in the above step on the EFI System
-Partition under the EFI/UpdateCapsule directory
-
-Testing on QEMU
-***************
-
-Currently, support has been added on the QEMU ARM64 virt platform for
-updating the U-Boot binary as a raw image when the platform is booted
-in non-secure mode, i.e. with CONFIG_TFABOOT disabled. For this
-configuration, the QEMU platform needs to be booted with
-'secure=off'. The U-Boot binary placed on the first bank of the NOR
-flash at offset 0x0. The U-Boot environment is placed on the second
-NOR flash bank at offset 0x4000000.
-
-The capsule update feature is enabled with the following configuration
-settings::
-
-    CONFIG_MTD=y
-    CONFIG_FLASH_CFI_MTD=y
-    CONFIG_CMD_MTDPARTS=y
-    CONFIG_CMD_DFU=y
-    CONFIG_DFU_MTD=y
-    CONFIG_PCI_INIT_R=y
-    CONFIG_EFI_CAPSULE_ON_DISK=y
-    CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
-    CONFIG_EFI_CAPSULE_FIRMWARE=y
-    CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
-
-In addition, the following config needs to be disabled(QEMU ARM specific)::
-
-    CONFIG_TFABOOT
-
-The capsule file can be generated by using the tools/mkeficapsule::
-
-    $ mkeficapsule --raw <u-boot.bin> --index 1 <capsule_file_name>
-
 Executing the boot manager
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 

+ 0 - 2
include/asm-generic/sections.h

@@ -27,8 +27,6 @@ extern char __efi_helloworld_begin[];
 extern char __efi_helloworld_end[];
 extern char __efi_var_file_begin[];
 extern char __efi_var_file_end[];
-extern char __efi_capsule_sig_begin[];
-extern char __efi_capsule_sig_end[];
 
 /* Private data used by of-platdata devices/uclasses */
 extern char __priv_data_start[], __priv_data_end[];

+ 0 - 7
lib/efi_loader/Kconfig

@@ -215,13 +215,6 @@ config EFI_CAPSULE_AUTHENTICATE
 	  Select this option if you want to enable capsule
 	  authentication
 
-config EFI_CAPSULE_KEY_PATH
-	string "Path to .esl cert for capsule authentication"
-	depends on EFI_CAPSULE_AUTHENTICATE
-	help
-	  Provide the EFI signature list (esl) certificate used for capsule
-	  authentication
-
 config EFI_DEVICE_PATH_TO_TEXT
 	bool "Device path to text protocol"
 	default y

+ 0 - 8
lib/efi_loader/Makefile

@@ -20,19 +20,11 @@ always += helloworld.efi
 targets += helloworld.o
 endif
 
-ifeq ($(CONFIG_EFI_CAPSULE_AUTHENTICATE),y)
-EFI_CAPSULE_KEY_PATH := $(subst $\",,$(CONFIG_EFI_CAPSULE_KEY_PATH))
-ifeq ("$(wildcard $(EFI_CAPSULE_KEY_PATH))","")
-$(error .esl certificate not found. Configure your CONFIG_EFI_CAPSULE_KEY_PATH)
-endif
-endif
-
 obj-$(CONFIG_CMD_BOOTEFI_HELLO) += helloworld_efi.o
 obj-$(CONFIG_CMD_BOOTEFI_BOOTMGR) += efi_bootmgr.o
 obj-y += efi_boottime.o
 obj-y += efi_helper.o
 obj-$(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) += efi_capsule.o
-obj-$(CONFIG_EFI_CAPSULE_AUTHENTICATE) += efi_capsule_key.o
 obj-$(CONFIG_EFI_CAPSULE_FIRMWARE) += efi_firmware.o
 obj-y += efi_console.o
 obj-y += efi_device_path.o

+ 3 - 15
lib/efi_loader/efi_capsule.c

@@ -16,7 +16,6 @@
 #include <mapmem.h>
 #include <sort.h>
 
-#include <asm/sections.h>
 #include <crypto/pkcs7.h>
 #include <crypto/pkcs7_parser.h>
 #include <linux/err.h>
@@ -253,23 +252,12 @@ out:
 
 #if defined(CONFIG_EFI_CAPSULE_AUTHENTICATE)
 
-static int efi_get_public_key_data(void **pkey, efi_uintn_t *pkey_len)
-{
-	const void *blob = __efi_capsule_sig_begin;
-	const int len = __efi_capsule_sig_end - __efi_capsule_sig_begin;
-
-	*pkey = (void *)blob;
-	*pkey_len = len;
-
-	return 0;
-}
-
 efi_status_t efi_capsule_authenticate(const void *capsule, efi_uintn_t capsule_size,
 				      void **image, efi_uintn_t *image_size)
 {
 	u8 *buf;
 	int ret;
-	void *stored_pkey, *pkey;
+	void *fdt_pkey, *pkey;
 	efi_uintn_t pkey_len;
 	uint64_t monotonic_count;
 	struct efi_signature_store *truststore;
@@ -322,7 +310,7 @@ efi_status_t efi_capsule_authenticate(const void *capsule, efi_uintn_t capsule_s
 		goto out;
 	}
 
-	ret = efi_get_public_key_data(&stored_pkey, &pkey_len);
+	ret = efi_get_public_key_data(&fdt_pkey, &pkey_len);
 	if (ret < 0)
 		goto out;
 
@@ -330,7 +318,7 @@ efi_status_t efi_capsule_authenticate(const void *capsule, efi_uintn_t capsule_s
 	if (!pkey)
 		goto out;
 
-	memcpy(pkey, stored_pkey, pkey_len);
+	memcpy(pkey, fdt_pkey, pkey_len);
 	truststore = efi_build_signature_store(pkey, pkey_len);
 	if (!truststore)
 		goto out;

+ 0 - 17
lib/efi_loader/efi_capsule_key.S

@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * .esl cert for capsule authentication
- *
- * Copyright (c) 2021, Ilias Apalodimas <ilias.apalodimas@linaro.org>
- */
-
-#include <config.h>
-
-.section .rodata.capsule_key.init,"a"
-.balign 16
-.global __efi_capsule_sig_begin
-__efi_capsule_sig_begin:
-.incbin CONFIG_EFI_CAPSULE_KEY_PATH
-__efi_capsule_sig_end:
-.global __efi_capsule_sig_end
-.balign 16

+ 222 - 7
tools/mkeficapsule.c

@@ -4,17 +4,22 @@
  *		Author: AKASHI Takahiro
  */
 
+#include <errno.h>
 #include <getopt.h>
 #include <malloc.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include <unistd.h>
 #include <linux/types.h>
 
+#include <sys/mman.h>
 #include <sys/stat.h>
 #include <sys/types.h>
 
+#include "fdt_host.h"
+
 typedef __u8 u8;
 typedef __u16 u16;
 typedef __u32 u32;
@@ -24,6 +29,9 @@ typedef __s32 s32;
 
 #define aligned_u64 __aligned_u64
 
+#define SIGNATURE_NODENAME	"signature"
+#define OVERLAY_NODENAME	"__overlay__"
+
 #ifndef __packed
 #define __packed __attribute__((packed))
 #endif
@@ -44,6 +52,9 @@ static struct option options[] = {
 	{"raw", required_argument, NULL, 'r'},
 	{"index", required_argument, NULL, 'i'},
 	{"instance", required_argument, NULL, 'I'},
+	{"dtb", required_argument, NULL, 'D'},
+	{"public key", required_argument, NULL, 'K'},
+	{"overlay", no_argument, NULL, 'O'},
 	{"help", no_argument, NULL, 'h'},
 	{NULL, 0, NULL, 0},
 };
@@ -57,10 +68,187 @@ static void print_usage(void)
 	       "\t-r, --raw <raw image>       new raw image file\n"
 	       "\t-i, --index <index>         update image index\n"
 	       "\t-I, --instance <instance>   update hardware instance\n"
+	       "\t-K, --public-key <key file> public key esl file\n"
+	       "\t-D, --dtb <dtb file>        dtb file\n"
+	       "\t-O, --overlay               the dtb file is an overlay\n"
 	       "\t-h, --help                  print a help message\n",
 	       tool_name);
 }
 
+static int fdt_add_pub_key_data(void *sptr, void *dptr, size_t key_size,
+				bool overlay)
+{
+	int parent;
+	int ov_node;
+	int frag_node;
+	int ret = 0;
+
+	if (overlay) {
+		/*
+		 * The signature would be stored in the
+		 * first fragment node of the overlay
+		 */
+		frag_node = fdt_first_subnode(dptr, 0);
+		if (frag_node == -FDT_ERR_NOTFOUND) {
+			fprintf(stderr,
+				"Couldn't find the fragment node: %s\n",
+				fdt_strerror(frag_node));
+			goto done;
+		}
+
+		ov_node = fdt_subnode_offset(dptr, frag_node, OVERLAY_NODENAME);
+		if (ov_node == -FDT_ERR_NOTFOUND) {
+			fprintf(stderr,
+				"Couldn't find the __overlay__ node: %s\n",
+				fdt_strerror(ov_node));
+			goto done;
+		}
+	} else {
+		ov_node = 0;
+	}
+
+	parent = fdt_subnode_offset(dptr, ov_node, SIGNATURE_NODENAME);
+	if (parent == -FDT_ERR_NOTFOUND) {
+		parent = fdt_add_subnode(dptr, ov_node, SIGNATURE_NODENAME);
+		if (parent < 0) {
+			ret = parent;
+			if (ret != -FDT_ERR_NOSPACE) {
+				fprintf(stderr,
+					"Couldn't create signature node: %s\n",
+					fdt_strerror(parent));
+			}
+		}
+	}
+	if (ret)
+		goto done;
+
+	/* Write the key to the FDT node */
+	ret = fdt_setprop(dptr, parent, "capsule-key",
+			  sptr, key_size);
+
+done:
+	if (ret)
+		ret = ret == -FDT_ERR_NOSPACE ? -ENOSPC : -EIO;
+
+	return ret;
+}
+
+static int add_public_key(const char *pkey_file, const char *dtb_file,
+			  bool overlay)
+{
+	int ret;
+	int srcfd = -1;
+	int destfd = -1;
+	void *sptr = NULL;
+	void *dptr = NULL;
+	off_t src_size;
+	struct stat pub_key;
+	struct stat dtb;
+
+	/* Find out the size of the public key */
+	srcfd = open(pkey_file, O_RDONLY);
+	if (srcfd == -1) {
+		fprintf(stderr, "%s: Can't open %s: %s\n",
+			__func__, pkey_file, strerror(errno));
+		ret = -1;
+		goto err;
+	}
+
+	ret = fstat(srcfd, &pub_key);
+	if (ret == -1) {
+		fprintf(stderr, "%s: Can't stat %s: %s\n",
+			__func__, pkey_file, strerror(errno));
+		ret = -1;
+		goto err;
+	}
+
+	src_size = pub_key.st_size;
+
+	/* mmap the public key esl file */
+	sptr = mmap(0, src_size, PROT_READ, MAP_SHARED, srcfd, 0);
+	if (sptr == MAP_FAILED) {
+		fprintf(stderr, "%s: Failed to mmap %s:%s\n",
+			__func__, pkey_file, strerror(errno));
+		ret = -1;
+		goto err;
+	}
+
+	/* Open the dest FDT */
+	destfd = open(dtb_file, O_RDWR);
+	if (destfd == -1) {
+		fprintf(stderr, "%s: Can't open %s: %s\n",
+			__func__, dtb_file, strerror(errno));
+		ret = -1;
+		goto err;
+	}
+
+	ret = fstat(destfd, &dtb);
+	if (ret == -1) {
+		fprintf(stderr, "%s: Can't stat %s: %s\n",
+			__func__, dtb_file, strerror(errno));
+		goto err;
+	}
+
+	dtb.st_size += src_size + 0x30;
+	if (ftruncate(destfd, dtb.st_size)) {
+		fprintf(stderr, "%s: Can't expand %s: %s\n",
+			__func__, dtb_file, strerror(errno));
+		ret = -1;
+		goto err;
+	}
+
+	errno = 0;
+	/* mmap the dtb file */
+	dptr = mmap(0, dtb.st_size, PROT_READ | PROT_WRITE, MAP_SHARED,
+		    destfd, 0);
+	if (dptr == MAP_FAILED) {
+		fprintf(stderr, "%s: Failed to mmap %s:%s\n",
+			__func__, dtb_file, strerror(errno));
+		ret = -1;
+		goto err;
+	}
+
+	if (fdt_check_header(dptr)) {
+		fprintf(stderr, "%s: Invalid FDT header\n", __func__);
+		ret = -1;
+		goto err;
+	}
+
+	ret = fdt_open_into(dptr, dptr, dtb.st_size);
+	if (ret) {
+		fprintf(stderr, "%s: Cannot expand FDT: %s\n",
+			__func__, fdt_strerror(ret));
+		ret = -1;
+		goto err;
+	}
+
+	/* Copy the esl file to the expanded FDT */
+	ret = fdt_add_pub_key_data(sptr, dptr, src_size, overlay);
+	if (ret < 0) {
+		fprintf(stderr, "%s: Unable to add public key to the FDT\n",
+			__func__);
+		ret = -1;
+		goto err;
+	}
+
+	ret = 0;
+
+err:
+	if (sptr)
+		munmap(sptr, src_size);
+
+	if (dptr)
+		munmap(dptr, dtb.st_size);
+
+	if (srcfd != -1)
+		close(srcfd);
+
+	if (destfd != -1)
+		close(destfd);
+
+	return ret;
+}
+
 static int create_fwbin(char *path, char *bin, efi_guid_t *guid,
 			unsigned long index, unsigned long instance)
 {
@@ -178,16 +366,22 @@ err_1:
 int main(int argc, char **argv)
 {
 	char *file;
+	char *pkey_file;
+	char *dtb_file;
 	efi_guid_t *guid;
 	unsigned long index, instance;
 	int c, idx;
+	int ret;
+	bool overlay = false;
 
 	file = NULL;
+	pkey_file = NULL;
+	dtb_file = NULL;
 	guid = NULL;
 	index = 0;
 	instance = 0;
 	for (;;) {
-		c = getopt_long(argc, argv, "f:r:i:I:v:h", options, &idx);
+		c = getopt_long(argc, argv, "f:r:i:I:v:D:K:Oh", options, &idx);
 		if (c == -1)
 			break;
 
@@ -214,22 +408,43 @@ int main(int argc, char **argv)
 		case 'I':
 			instance = strtoul(optarg, NULL, 0);
 			break;
+		case 'K':
+			if (pkey_file) {
+				printf("Public Key already specified\n");
+				return -1;
+			}
+			pkey_file = optarg;
+			break;
+		case 'D':
+			if (dtb_file) {
+				printf("DTB file already specified\n");
+				return -1;
+			}
+			dtb_file = optarg;
+			break;
+		case 'O':
+			overlay = true;
+			break;
 		case 'h':
 			print_usage();
 			return 0;
 		}
 	}
 
-	/* need an output file */
-	if (argc != optind + 1) {
+	/* need a fit image file or raw image file */
+	if (!file && !pkey_file && !dtb_file) {
 		print_usage();
 		exit(EXIT_FAILURE);
 	}
 
-	/* need a fit image file or raw image file */
-	if (!file) {
-		print_usage();
-		exit(EXIT_SUCCESS);
+	if (pkey_file && dtb_file) {
+		ret = add_public_key(pkey_file, dtb_file, overlay);
+		if (ret == -1) {
+			printf("Adding public key to the dtb failed\n");
+			exit(EXIT_FAILURE);
+		} else {
+			exit(EXIT_SUCCESS);
+		}
 	}
 
 	if (create_fwbin(argv[optind], file, guid, index, instance)