Browse Source

ARM: uniphier: update U-Boot file names in workflow

Since commit ad1ecd2063da ("fdt: Build a U-Boot binary without device
tree") and commit 03c25bcd263a ("fdt: Build an SPL binary without
device tree"), we can use shorter file names for the output images.

The default configuration for UniPhier SoCs enables CONFIG_OF_SEPARATE
and CONFIG_SPL_OF_CONTROL.  In this case, spl/u-boot-spl.bin is the
same as spl/u-boot-spl-dtb.bin.  Likewise, u-boot.img is the same as
as u-boot-dtb.img.  So, this change of the flow has no impact.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada 8 years ago
parent
commit
3cb9abc9c5
2 changed files with 5 additions and 5 deletions
  1. 3 3
      doc/README.uniphier
  2. 2 2
      include/configs/uniphier.h

+ 3 - 3
doc/README.uniphier

@@ -68,8 +68,8 @@ Burn U-Boot images to NAND
 --------------------------
 
 Write two files to the NAND device as follows:
- - spl/u-boot-spl-dtb.bin at the offset address 0x00000000
- - u-boot-dtb.img         at the offset address 0x00010000
+ - spl/u-boot-spl.bin at the offset address 0x00000000
+ - u-boot.img         at the offset address 0x00010000
 
 If a TFTP server is available, the images can be easily updated.
 Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
@@ -145,4 +145,4 @@ newer SoCs.  Even if it is, EA[25] is not connected on most of the boards.
 
 --
 Masahiro Yamada <yamada.masahiro@socionext.com>
-Aug. 2015
+Feb. 2016

+ 2 - 2
include/configs/uniphier.h

@@ -230,9 +230,9 @@
 	"nor_base=0x42000000\0"					\
 	"bootm_low=0x80000000\0"				\
 	"nandupdate=nand erase 0 0x00100000 &&"			\
-		"tftpboot u-boot-spl-dtb.bin &&"		\
+		"tftpboot u-boot-spl.bin &&"			\
 		"nand write $loadaddr 0 0x00010000 &&"		\
-		"tftpboot u-boot-dtb.img &&"			\
+		"tftpboot u-boot.img &&"			\
 		"nand write $loadaddr 0x00010000 0x000f0000\0"	\
 	LINUXBOOT_ENV_SETTINGS