Forráskód Böngészése

rockchip: rk3328: Migrate to use common board file

Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Kever Yang 4 éve
szülő
commit
38ed26777f
2 módosított fájl, 1 hozzáadás és 64 törlés
  1. 1 0
      arch/arm/mach-rockchip/Kconfig
  2. 0 64
      board/rockchip/evb_rk3328/evb-rk3328.c

+ 1 - 0
arch/arm/mach-rockchip/Kconfig

@@ -110,6 +110,7 @@ config ROCKCHIP_RK3328
 	select ARM64
 	select SUPPORT_SPL
 	select SPL
+	imply ROCKCHIP_COMMON_BOARD
 	imply SPL_ROCKCHIP_COMMON_BOARD
 	imply SPL_SERIAL_SUPPORT
 	imply SPL_SEPARATE_BSS

+ 0 - 64
board/rockchip/evb_rk3328/evb-rk3328.c

@@ -3,67 +3,3 @@
  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
  */
 
-#include <common.h>
-#include <asm/armv8/mmu.h>
-#include <dwc3-uboot.h>
-#include <power/regulator.h>
-#include <usb.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	int ret;
-
-	ret = regulators_enable_boot_on(false);
-	if (ret)
-		debug("%s: Cannot enable boot on regulator\n", __func__);
-
-	return ret;
-}
-
-#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
-#include <usb.h>
-#include <usb/dwc2_udc.h>
-
-static struct dwc2_plat_otg_data otg_data = {
-	.rx_fifo_sz	= 512,
-	.np_tx_fifo_sz	= 16,
-	.tx_fifo_sz	= 128,
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-	int node;
-	const char *mode;
-	bool matched = false;
-	const void *blob = gd->fdt_blob;
-
-	/* find the usb_otg node */
-	node = fdt_node_offset_by_compatible(blob, -1,
-					"snps,dwc2");
-
-	while (node > 0) {
-		mode = fdt_getprop(blob, node, "dr_mode", NULL);
-		if (mode && strcmp(mode, "otg") == 0) {
-			matched = true;
-			break;
-		}
-
-		node = fdt_node_offset_by_compatible(blob, node,
-					"snps,dwc2");
-	}
-	if (!matched) {
-		debug("Not found usb_otg device\n");
-		return -ENODEV;
-	}
-	otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
-
-	return dwc2_udc_probe(&otg_data);
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return 0;
-}
-#endif