Browse Source

Finish converting CONFIG_WATCHDOG, HW_WATCHDOG and WDT to Kconfig

Because of how these symbols work, and the remaining board config.h file
uses, we need to do these at the same time.  In some cases we just get
to move rather directly to the defconfigs.  A few cases require manual
intervention.

For the case of the eb_cpu5282 we need to select HW_WATCHDOG for the
target, given how it's implemented.

For the cases of m53menlo, dh_imx6, display5, and display5_factory we
disable SPL watchdog support as the particular combination of options
they want would require either more symbols or enabling SPL_DM.

Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini 2 years ago
parent
commit
3847ba94f0

+ 0 - 14
README

@@ -639,20 +639,6 @@ The following options need to be configured:
 		example "env grep" and "setexpr".
 
 - Watchdog:
-		CONFIG_WATCHDOG
-		If this variable is defined, it enables watchdog
-		support for the SoC. There must be support in the SoC
-		specific code for a watchdog. For the 8xx
-		CPUs, the SIU Watchdog feature is enabled in the SYPCR
-		register.  When supported for a specific SoC is
-		available, then no further board specific code should
-		be needed to use it.
-
-		CONFIG_HW_WATCHDOG
-		When using a watchdog circuitry external to the used
-		SoC, then define this variable and provide board
-		specific code for the "hw_watchdog_reset" function.
-
 		CONFIG_SYS_WATCHDOG_FREQ
 		Some platforms automatically call WATCHDOG_RESET()
 		from the timer interrupt handler every

+ 1 - 0
arch/m68k/Kconfig

@@ -128,6 +128,7 @@ config TARGET_COBRA5272
 config TARGET_EB_CPU5282
 	bool "Support eb_cpu5282"
 	select M5282
+	select HW_WATCHDOG
 
 config TARGET_M5208EVBE
 	bool "Support M5208EVBE"

+ 2 - 0
board/liebherr/display5/spl.c

@@ -327,8 +327,10 @@ void board_init_f(ulong dummy)
 	displ5_set_iomux_misc_spl();
 
 	/* Initialize and reset WDT in SPL */
+#ifdef CONFIG_SPL_WATCHDOG
 	hw_watchdog_init();
 	WATCHDOG_RESET();
+#endif
 
 	/* load/boot image from boot device */
 	board_init_r(NULL, 0);

+ 1 - 0
configs/astro_mcf5373l_defconfig

@@ -40,3 +40,4 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MCFUART=y
+CONFIG_WATCHDOG=y

+ 0 - 1
configs/dh_imx6_defconfig

@@ -37,7 +37,6 @@ CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400
-CONFIG_SPL_WATCHDOG=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_UNZIP=y
 CONFIG_CMD_DFU=y

+ 0 - 1
configs/display5_defconfig

@@ -45,7 +45,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
-CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="display5 > "
 CONFIG_CMD_BOOTZ=y

+ 0 - 1
configs/display5_factory_defconfig

@@ -43,7 +43,6 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
-CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="display5 factory > "
 CONFIG_CMD_BOOTZ=y

+ 1 - 0
configs/ids8313_defconfig

@@ -199,4 +199,5 @@ CONFIG_TSEC_ENET=y
 # CONFIG_PCI is not set
 CONFIG_RTC_PCF8563=y
 CONFIG_SYS_NS16550=y
+CONFIG_WATCHDOG=y
 CONFIG_OF_LIBFDT=y

+ 0 - 1
configs/m53menlo_defconfig

@@ -36,7 +36,6 @@ CONFIG_PREBOOT="run try_bootscript"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y

+ 0 - 1
include/configs/M5208EVBE.h

@@ -15,7 +15,6 @@
  */
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT		5000
 
 #ifdef CONFIG_MCFFEC

+ 0 - 1
include/configs/M5235EVB.h

@@ -20,7 +20,6 @@
 
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
 
 /*

+ 0 - 2
include/configs/M5249EVB.h

@@ -21,8 +21,6 @@
 
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef  CONFIG_WATCHDOG
-
 #undef CONFIG_MONITOR_IS_IN_RAM		/* no pre-loader required!!! ;-) */
 
 /*

+ 0 - 2
include/configs/M5253DEMO.h

@@ -12,8 +12,6 @@
 
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG		/* disable watchdog */
-
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash

+ 0 - 1
include/configs/M5272C3.h

@@ -20,7 +20,6 @@
 
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
 
 #undef CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */

+ 0 - 1
include/configs/M53017EVB.h

@@ -20,7 +20,6 @@
 
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT		5000
 
 #define CONFIG_SYS_UNIFY_CACHE

+ 0 - 1
include/configs/M5329EVB.h

@@ -20,7 +20,6 @@
 
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
 
 #define CONFIG_SYS_UNIFY_CACHE

+ 0 - 1
include/configs/M5373EVB.h

@@ -22,7 +22,6 @@
 
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	3360	/* timeout in ms, max is 3.36 sec */
 
 #define CONFIG_SYS_UNIFY_CACHE

+ 0 - 2
include/configs/MPC837XERDB.h

@@ -302,8 +302,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#undef CONFIG_WATCHDOG		/* watchdog disabled */
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR

+ 0 - 2
include/configs/MPC8540ADS.h

@@ -266,8 +266,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
 /*
  * Miscellaneous configurable options
  */

+ 0 - 2
include/configs/MPC8548CDS.h

@@ -384,8 +384,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
 /*
  * Miscellaneous configurable options
  */

+ 0 - 2
include/configs/MPC8560ADS.h

@@ -253,8 +253,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
 /*
  * Miscellaneous configurable options
  */

+ 0 - 2
include/configs/P1010RDB.h

@@ -595,8 +595,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
 		 || defined(CONFIG_FSL_SATA)
 #endif

+ 0 - 1
include/configs/astro_mcf5373l.h

@@ -91,7 +91,6 @@
  */
 
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 3355	/* timeout in milliseconds */
 #endif
 

+ 0 - 1
include/configs/cobra5272.h

@@ -54,7 +54,6 @@
  */
 
 #if 0
-#define CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
 #endif
 

+ 0 - 7
include/configs/dh_imx6.h

@@ -64,13 +64,6 @@
 #endif
 #endif
 
-/* Watchdog */
-#if defined(CONFIG_SPL_BUILD)
-#undef CONFIG_WDT
-#undef CONFIG_WATCHDOG
-#define CONFIG_HW_WATCHDOG
-#endif
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"console=ttymxc0,115200\0"	\

+ 0 - 7
include/configs/display5.h

@@ -314,13 +314,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* Watchdog */
-#if defined(CONFIG_SPL_BUILD)
-#undef CONFIG_WDT
-#undef CONFIG_WATCHDOG
-#define CONFIG_HW_WATCHDOG
-#endif
-
 /* ENV config */
 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */

+ 0 - 2
include/configs/eb_cpu5282.h

@@ -25,8 +25,6 @@
 #define CONFIG_BOOT_RETRY_TIME	-1
 #define CONFIG_RESET_TO_RETRY
 
-#define CONFIG_HW_WATCHDOG
-
 #define STATUS_LED_ACTIVE		0
 
 /*----------------------------------------------------------------------*

+ 0 - 1
include/configs/ids8313.h

@@ -153,7 +153,6 @@
 /*
  * HW-Watchdog
  */
-#define CONFIG_WATCHDOG		1
 #define CONFIG_SYS_WATCHDOG_VALUE	0xFFFF
 
 /*

+ 0 - 5
include/configs/m53menlo.h

@@ -204,9 +204,4 @@
 		"fi ; "							\
 		"fi\0"
 
-#if defined(CONFIG_SPL_BUILD)
-#undef CONFIG_WATCHDOG
-#define CONFIG_HW_WATCHDOG
-#endif
-
 #endif	/* __M53MENLO_CONFIG_H__ */

+ 0 - 2
include/configs/p1_p2_rdb_pc.h

@@ -545,8 +545,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
-#undef CONFIG_WATCHDOG	/* watchdog disabled */
-
 /*
  * Miscellaneous configurable options
  */

+ 0 - 1
include/configs/socfpga_soc64_common.h

@@ -147,7 +147,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  * L4 Watchdog
  */
 #ifndef CONFIG_SPL_BUILD
-#undef CONFIG_HW_WATCHDOG
 #undef CONFIG_DESIGNWARE_WATCHDOG
 #endif
 #define CONFIG_DW_WDT_BASE		SOCFPGA_L4WD0_ADDRESS

+ 0 - 2
include/configs/socrates.h

@@ -181,8 +181,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
 /*
  * Miscellaneous configurable options
  */