소스 검색

smegw01: Allow booting the Yocto image by default

On the Yocto image there is a single partition and the kernel
and dtb are present in the 'boot' directory.

Change it accordingly so that the board can boot the Yocto
image by default.

Use the generic 'load' command instead, which is able to
read from an ext4 partition.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Fabio Estevam 3 년 전
부모
커밋
364212ca29
1개의 변경된 파일3개의 추가작업 그리고 3개의 파일을 삭제
  1. 3 3
      include/configs/smegw01.h

+ 3 - 3
include/configs/smegw01.h

@@ -29,11 +29,11 @@
 	"bootm_size=0x10000000\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
+	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \
+	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if run loadfdt; then " \