Browse Source

mpc5121: pdm360ng: add coprocessor POST

Adds coprocessor communication POST code

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin 14 years ago
parent
commit
29fd7ceb3c
5 changed files with 145 additions and 0 deletions
  1. 5 0
      include/configs/pdm360ng.h
  2. 1 0
      include/post.h
  3. 29 0
      post/board/pdm360ng/Makefile
  4. 97 0
      post/board/pdm360ng/coproc_com.c
  5. 13 0
      post/tests.c

+ 5 - 0
include/configs/pdm360ng.h

@@ -445,6 +445,11 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
+#ifdef CONFIG_SERIAL_MULTI
+/* POST support */
+#define CONFIG_POST             (CONFIG_SYS_POST_COPROC)
+#endif
+
 /*
  * Environment Configuration
  */

+ 1 - 0
include/post.h

@@ -124,6 +124,7 @@ extern int post_hotkeys_pressed(void);
 #define CONFIG_SYS_POST_BSPEC4		0x00080000
 #define CONFIG_SYS_POST_BSPEC5		0x00100000
 #define CONFIG_SYS_POST_CODEC		0x00200000
+#define CONFIG_SYS_POST_COPROC		0x00400000
 
 #endif /* CONFIG_POST */
 

+ 29 - 0
post/board/pdm360ng/Makefile

@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2010 DENX Software Engineering
+# Anatolij Gustschin, agust@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(OBJTREE)/include/autoconf.mk
+
+LIB	= libpostpdm360ng.a
+
+COBJS-$(CONFIG_HAS_POST)	+= coproc_com.o
+
+include $(TOPDIR)/post/rules.mk

+ 97 - 0
post/board/pdm360ng/coproc_com.c

@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2010 DENX Software Engineering,
+ * Anatolij Gustschin, agust@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Co-Processor communication POST
+ */
+#include <common.h>
+#include <post.h>
+#include <serial.h>
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+/*
+ * Actually the termination sequence of the coprocessor
+ * commands is "\r\n" (CR LF), but here we use a side effect of
+ * the putc() routine of the serial driver which checks for LF
+ * and sends CR before sending LF. Therefore the termination
+ * sequence in the command below is only "\n".
+ * "alive" string is the coprocessor response for ping command
+ * and not a command, therefore it is terminated with "\r\n".
+ */
+char alive[] = "$AL;38\r\n";
+char ping[] = "$PI;2C\n";
+
+int coprocessor_post_test(int flags)
+{
+	struct stdio_dev *cop_port;
+	int ret;
+	char buf[10];
+
+	/* Test IO Coprocessor communication */
+	cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
+	if (!cop_port)
+		return -1;
+
+	write_port(cop_port, ping);
+	udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
+
+	memset(buf, 0, sizeof(buf));
+	ret = read_port(cop_port, buf, sizeof(buf));
+	close_port(4);
+	if (ret <= 0) {
+		post_log("Error: Can't read IO Coprocessor port.\n");
+		return -1;
+	}
+
+	if (strcmp(buf, alive)) {
+		post_log("Error: IO-Cop. resp.: %s\n", buf);
+		return -1;
+	}
+
+	/* Test WD Coprocessor communication */
+	cop_port = open_port(1, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
+	if (!cop_port) {
+		post_log("Error: Can't open WD Coprocessor port.\n");
+		return -1;
+	}
+
+	write_port(cop_port, ping);
+	udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
+
+	memset(buf, 0, sizeof(buf));
+	ret = read_port(cop_port, buf, sizeof(buf));
+	close_port(1);
+	if (ret <= 0) {
+		post_log("Error: Can't read WD Coprocessor port.\n");
+		return -1;
+	}
+
+	if (strcmp(buf, alive)) {
+		post_log("Error: WD-Cop. resp.: %s\n", buf);
+		return -1;
+	}
+
+	return 0;
+}
+#endif	/* CONFIG_SERIAL_MULTI */

+ 13 - 0
post/tests.c

@@ -53,6 +53,7 @@ extern int gdc_post_test (int flags);
 extern int fpga_post_test (int flags);
 extern int lwmon5_watchdog_post_test(int flags);
 extern int sysmon1_post_test(int flags);
+extern int coprocessor_post_test(int flags);
 
 extern int sysmon_init_f (void);
 
@@ -286,6 +287,18 @@ struct post_test post_list[] =
 #if CONFIG_POST & CONFIG_SYS_POST_BSPEC5
 	CONFIG_POST_BSPEC5,
 #endif
+#if CONFIG_POST & CONFIG_SYS_POST_COPROC
+    {
+	"Coprocessors communication test",
+	"coproc_com",
+	"This test checks communication with coprocessors.",
+	POST_RAM | POST_ALWAYS | POST_CRITICAL,
+	&coprocessor_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_COPROC
+    }
+#endif
 };
 
 unsigned int post_list_size = sizeof (post_list) / sizeof (struct post_test);