Browse Source

Blackfin: post: generalize led/button tests with GPIOs

Make it easy for any Blackfin board to enable led/push button tests.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger 13 years ago
parent
commit
2151374fa6

+ 18 - 0
arch/blackfin/include/asm/config.h

@@ -169,4 +169,22 @@
 # define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
 #endif
 
+/* Blackfin POST tests */
+#ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
+# define CONFIG_POST_BSPEC1 \
+	{ \
+		"LED test", "led", "This test verifies LEDs on the board.", \
+		POST_MEM | POST_ALWAYS, &led_post_test, NULL, NULL, \
+		CONFIG_SYS_POST_BSPEC1, \
+	}
+#endif
+#ifdef CONFIG_POST_BSPEC2_GPIO_BUTTONS
+# define CONFIG_POST_BSPEC2 \
+	{ \
+		"Button test", "button", "This test verifies buttons on the board.", \
+		POST_MEM | POST_ALWAYS, &button_post_test, NULL, NULL, \
+		CONFIG_SYS_POST_BSPEC2, \
+	}
+#endif
+
 #endif

+ 1 - 0
arch/blackfin/lib/Makefile

@@ -46,6 +46,7 @@ COBJS-y	+= clocks.o
 COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o
 COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
 COBJS-y	+= muldi3.o
+COBJS-$(CONFIG_HAS_POST) += post.o
 COBJS-y	+= string.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)

+ 25 - 27
board/bf537-stamp/post.c → arch/blackfin/lib/post.c

@@ -1,69 +1,66 @@
 /*
- * BF537-STAMP POST code
+ * Blackfin POST code
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
+ * Copyright (c) 2005-2011 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
 
 #include <common.h>
 #include <config.h>
-#include <command.h>
-#include <asm/blackfin.h>
+#include <post.h>
+
 #include <asm/gpio.h>
 
-/****************************************************
- * LED1 ---- PF6	LED2 ---- PF7		    *
- * LED3 ---- PF8	LED4 ---- PF9		    *
- * LED5 ---- PF10	LED6 ---- PF11		    *
- ****************************************************/
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
 int led_post_test(int flags)
 {
-	unsigned int leds[] = {
-		GPIO_PF6, GPIO_PF7, GPIO_PF8,
-		GPIO_PF9, GPIO_PF10, GPIO_PF11,
-	};
+	unsigned leds[] = { CONFIG_POST_BSPEC1_GPIO_LEDS };
 	int i;
 
+	/* First turn them all off */
 	for (i = 0; i < ARRAY_SIZE(leds); ++i) {
-		gpio_request(leds[i], "post");
+		if (gpio_request(leds[i], "post")) {
+			printf("could not request gpio %u\n", leds[i]);
+			continue;
+		}
 		gpio_direction_output(leds[i], 0);
+	}
 
+	/* Now turn them on one by one */
+	for (i = 0; i < ARRAY_SIZE(leds); ++i) {
 		printf("LED%i on", i + 1);
 		gpio_set_value(leds[i], 1);
 		udelay(1000000);
 		printf("\b\b\b\b\b\b\b");
-
 		gpio_free(leds[i]);
 	}
 
 	return 0;
 }
+#endif
 
-/************************************************
- *  SW10 ---- PF5	SW11 ---- PF4		*
- *  SW12 ---- PF3	SW13 ---- PF2		*
- ************************************************/
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
 int button_post_test(int flags)
 {
-	unsigned int buttons[] = {
-		GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5,
-	};
-	unsigned int sws[] = { 13, 12, 11, 10, };
+	unsigned buttons[] = { CONFIG_POST_BSPEC2_GPIO_BUTTONS };
+	unsigned int sws[] = { CONFIG_POST_BSPEC2_GPIO_NAMES };
 	int i, delay = 5;
 	unsigned short value = 0;
 	int result = 0;
 
 	for (i = 0; i < ARRAY_SIZE(buttons); ++i) {
-		gpio_request(buttons[i], "post");
+		if (gpio_request(buttons[i], "post")) {
+			printf("could not request gpio %u\n", buttons[i]);
+			continue;
+		}
 		gpio_direction_input(buttons[i]);
 
 		delay = 5;
 		printf("\n--------Press SW%i: %2d ", sws[i], delay);
 		while (delay--) {
-			for (i = 0; i < 100; i++) {
+			int j;
+			for (j = 0; j < 100; j++) {
 				value = gpio_get_value(buttons[i]);
 				if (value != 0)
 					break;
@@ -85,3 +82,4 @@ int button_post_test(int flags)
 
 	return result;
 }
+#endif

+ 1 - 1
board/bf537-stamp/Makefile

@@ -31,7 +31,7 @@ LIB	= $(obj)lib$(BOARD).o
 
 COBJS-y	:= $(BOARD).o
 COBJS-$(CONFIG_BFIN_IDE)   += ide-cf.o
-COBJS-$(CONFIG_HAS_POST)   += post.o post-memory.o
+COBJS-$(CONFIG_HAS_POST)   += post-memory.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))

+ 6 - 0
include/configs/bf537-stamp.h

@@ -258,6 +258,12 @@
 #undef CONFIG_POST
 #ifdef CONFIG_POST
 #define CONFIG_SYS_POST_HOTKEYS_GPIO	GPIO_PF5
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+	GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+	GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2,
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+	10, 11, 12, 13,
 #define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
 #define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
 #endif

+ 6 - 0
include/configs/bf548-ezkit.h

@@ -197,6 +197,12 @@
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+	GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+	GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+	13, 12, 11, 10,
 #define FLASH_START_POST_BLOCK 11       /* Should > = 11 */
 #define FLASH_END_POST_BLOCK   71       /* Should < = 71 */
 #endif

+ 2 - 0
post/tests.c

@@ -55,6 +55,8 @@ extern int fpga_post_test (int flags);
 extern int lwmon5_watchdog_post_test(int flags);
 extern int sysmon1_post_test(int flags);
 extern int coprocessor_post_test(int flags);
+extern int led_post_test(int flags);
+extern int button_post_test(int flags);
 
 extern int sysmon_init_f (void);