Przeglądaj źródła

Merge branch 'master' into next

Conflicts:
	lib_generic/zlib.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk 14 lat temu
rodzic
commit
206c00f26f

+ 1 - 0
Makefile

@@ -3266,6 +3266,7 @@ zylonite_config :
 #########################################################################
 
 apollon_config		: unconfig
+	@mkdir -p $(obj)include
 	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
 	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
 	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk

+ 5 - 5
README

@@ -846,20 +846,20 @@ The following options need to be configured:
 			Define this to use i/o functions instead of macros
 			(some hardware wont work with macros)
 
-		CONFIG_DRIVER_SMC911X
+		CONFIG_SMC911X
 		Support for SMSC's LAN911x and LAN921x chips
 
-			CONFIG_DRIVER_SMC911X_BASE
+			CONFIG_SMC911X_BASE
 			Define this to hold the physical address
 			of the device (I/O space)
 
-			CONFIG_DRIVER_SMC911X_32_BIT
+			CONFIG_SMC911X_32_BIT
 			Define this if data bus is 32 bits
 
-			CONFIG_DRIVER_SMC911X_16_BIT
+			CONFIG_SMC911X_16_BIT
 			Define this if data bus is 16 bits. If your processor
 			automatically converts one 32 bit word to two 16 bit
-			words you may also try CONFIG_DRIVER_SMC911X_32_BIT.
+			words you may also try CONFIG_SMC911X_32_BIT.
 
 - USB Support:
 		At the moment only the UHCI host controller is

+ 5 - 4
board/atmel/at91sam9261ek/at91sam9261ek.c

@@ -265,11 +265,12 @@ int board_init(void)
 }
 
 #ifdef CONFIG_DRIVER_DM9000
- int board_eth_init(bd_t *bis)
- {
+int board_eth_init(bd_t *bis)
+{
 	return dm9000_initialize(bis);
- }
- #endif
+}
+#endif
+
 int dram_init(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM;

+ 2 - 0
board/mucmc52/mucmc52.c

@@ -31,6 +31,7 @@
  */
 
 #include <common.h>
+#include <fdt_support.h>
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <malloc.h>
@@ -403,5 +404,6 @@ void pci_init_board (void)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

+ 2 - 0
board/uc101/uc101.c

@@ -31,6 +31,7 @@
  */
 
 #include <common.h>
+#include <fdt_support.h>
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <malloc.h>
@@ -376,5 +377,6 @@ void hw_watchdog_reset(void)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

+ 2 - 2
common/cmd_bootm.c

@@ -475,8 +475,8 @@ cmd_tbl_t cmd_bootm_sub[] = {
 #ifdef CONFIG_OF_LIBFDT
 	U_BOOT_CMD_MKENT(fdt, 0, 1, (void *)BOOTM_STATE_FDT, "", ""),
 #endif
-	U_BOOT_CMD_MKENT(bdt, 0, 1, (void *)BOOTM_STATE_OS_BD_T, "", ""),
 	U_BOOT_CMD_MKENT(cmdline, 0, 1, (void *)BOOTM_STATE_OS_CMDLINE, "", ""),
+	U_BOOT_CMD_MKENT(bdt, 0, 1, (void *)BOOTM_STATE_OS_BD_T, "", ""),
 	U_BOOT_CMD_MKENT(prep, 0, 1, (void *)BOOTM_STATE_OS_PREP, "", ""),
 	U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""),
 };
@@ -1022,8 +1022,8 @@ U_BOOT_CMD(
 #if defined(CONFIG_OF_LIBFDT)
 	"\tfdt     - relocate flat device tree\n"
 #endif
-	"\tbdt     - OS specific bd_t processing\n"
 	"\tcmdline - OS specific command line processing/setup\n"
+	"\tbdt     - OS specific bd_t processing\n"
 	"\tprep    - OS specific prep before relocation or go\n"
 	"\tgo      - start OS"
 );

+ 2 - 0
cpu/arm920t/s3c24x0/timer.c

@@ -198,6 +198,8 @@ void reset_cpu(ulong ignored)
 	struct s3c24x0_watchdog *watchdog;
 
 #ifdef CONFIG_TRAB
+	extern void disable_vfd(void);
+
 	disable_vfd();
 #endif
 

+ 1 - 1
cpu/arm_cortexa8/omap3/board.c

@@ -328,7 +328,7 @@ usage:
 
 U_BOOT_CMD(
 	nandecc, 2, 1,	do_switch_ecc,
-	"nandecc - switch OMAP3 NAND ECC calculation algorithm\n",
+	"switch OMAP3 NAND ECC calculation algorithm",
 	"[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm"
 );
 

+ 1 - 1
drivers/mtd/nand/nand_util.c

@@ -452,7 +452,7 @@ static size_t get_len_incl_bad (nand_info_t *nand, loff_t offset,
 		len_incl_bad += block_len;
 		offset       += block_len;
 
-		if ((offset + len_incl_bad) >= nand->size)
+		if (offset >= nand->size)
 			break;
 	}
 

+ 2 - 2
drivers/net/smc911x.c

@@ -37,7 +37,7 @@ void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) \
 
 #define mdelay(n)       udelay((n)*1000)
 
-static void smx911x_handle_mac_address(struct eth_device *dev)
+static void smc911x_handle_mac_address(struct eth_device *dev)
 {
 	unsigned long addrh, addrl;
 	uchar *m = dev->enetaddr;
@@ -155,7 +155,7 @@ static int smc911x_init(struct eth_device *dev, bd_t * bd)
 	/* Configure the PHY, initialize the link state */
 	smc911x_phy_configure(dev);
 
-	smx911x_handle_mac_address(dev);
+	smc911x_handle_mac_address(dev);
 
 	/* Turn on Tx + Rx */
 	smc911x_enable(dev);

+ 2 - 0
lib_generic/zlib.c

@@ -30,6 +30,8 @@
 #include <compiler.h>
 #include <asm/unaligned.h>
 #include "u-boot/zlib.h"
+#undef	OFF				/* avoid conflicts */
+
 /* To avoid a build time warning */
 #ifdef STDC
 #include <malloc.h>

+ 7 - 6
net/nfs.c

@@ -516,7 +516,7 @@ nfs_readlink_reply (uchar *pkt, unsigned len)
 		strcat (nfs_path, "/");
 		pathlen = strlen(nfs_path);
 		memcpy (nfs_path+pathlen, (uchar *)&(rpc_pkt.u.reply.data[2]), rlen);
-		nfs_path[pathlen+rlen+1] = 0;
+		nfs_path[pathlen + rlen] = 0;
 	} else {
 		memcpy (nfs_path, (uchar *)&(rpc_pkt.u.reply.data[2]), rlen);
 		nfs_path[rlen] = 0;
@@ -571,13 +571,14 @@ Interfaces of U-BOOT
 static void
 NfsTimeout (void)
 {
-	if ( NfsTimeoutCount++ < NFS_RETRY_COUNT ) {
+	if ( ++NfsTimeoutCount > NFS_RETRY_COUNT ) {
+		puts ("\nRetry count exceeded; starting again\n");
+		NetStartAgain ();
+	} else {
+		puts("T ");
+		NetSetTimeout (NFS_TIMEOUT, NfsTimeout);
 		NfsSend ();
-		return;
 	}
-	puts ("Timeout\n");
-	NetState = NETLOOP_FAIL;
-	return;
 }
 
 static void