Przeglądaj źródła

rockchip: gru: Allow setting up clocks in U-Boot proper

Commit fe974716326c ("rockchip: rk3288: Allow setting up clocks in
U-Boot proper") fixes some clock issues when chainloading U-Boot on
rk3288 chromebooks. Part of that change is still available in veyron's
board_early_init_r() function. Since chain-loading U-Boot proper from
vendor firmware is possible on gru boards as well, do the same thing for
them too.

On rk3399, this needs to detect whether SPL was run via handoff, so
enable that and bloblist kconfigs it needs for chromebook_bob.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Alper Nebi Yasak 3 lat temu
rodzic
commit
13634bb658
2 zmienionych plików z 28 dodań i 0 usunięć
  1. 23 0
      board/google/gru/gru.c
  2. 5 0
      configs/chromebook_bob_defconfig

+ 23 - 0
board/google/gru/gru.c

@@ -4,6 +4,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <init.h>
 
 #ifdef CONFIG_SPL_BUILD
@@ -31,3 +32,25 @@ int board_early_init_f(void)
 	return 0;
 }
 #endif
+
+#ifndef CONFIG_SPL_BUILD
+int board_early_init_r(void)
+{
+	struct udevice *clk;
+	int ret;
+
+	/*
+	 * This init is done in SPL, but when chain-loading U-Boot SPL will
+	 * have been skipped. Allow the clock driver to check if it needs
+	 * setting up.
+	 */
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+					  DM_GET_DRIVER(clk_rk3399), &clk);
+	if (ret) {
+		debug("%s: CLK init failed: %d\n", __func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+#endif

+ 5 - 0
configs/chromebook_bob_defconfig

@@ -19,6 +19,11 @@ CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_BLOBLIST=y
+CONFIG_BLOBLIST_SIZE=0x1000
+CONFIG_BLOBLIST_ADDR=0x100000
+CONFIG_HANDOFF=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000