Browse Source

lib: move hash CONFIG options to Kconfig

Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it.  Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool.  In many cases we can select
these because they are required to implement other drivers.  We also
correct how we include the various hashing algorithms in SPL.

This commit was generated as follows (after Kconfig additions):

[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL

Note:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.

Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Naveen Burmi <NaveenBurmi@freescale.com>
Cc: Po Liu <po.liu@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Chander Kashyap <k.chander@samsung.com>
Cc: Steve Rae <steve.rae@raedomain.com>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Feng Li <feng.li_2@nxp.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: Mingkai Hu <Mingkai.Hu@freescale.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini 7 years ago
parent
commit
089df18bfe
49 changed files with 31 additions and 66 deletions
  1. 2 0
      Kconfig
  2. 0 13
      README
  3. 0 2
      arch/arm/include/asm/fsl_secure_boot.h
  4. 1 0
      arch/arm/mach-exynos/Kconfig
  5. 0 1
      arch/powerpc/include/asm/fsl_secure_boot.h
  6. 2 0
      board/freescale/common/Kconfig
  7. 4 0
      common/spl/Kconfig
  8. 2 0
      configs/bcm911360_entphn-ns_defconfig
  9. 2 0
      configs/bcm911360_entphn_defconfig
  10. 2 0
      configs/bcm911360k_defconfig
  11. 2 0
      configs/bcm958300k-ns_defconfig
  12. 2 0
      configs/bcm958300k_defconfig
  13. 2 0
      configs/bcm958305k_defconfig
  14. 2 0
      configs/bcm958622hr_defconfig
  15. 1 0
      configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig
  16. 1 0
      configs/controlcenterd_TRAILBLAZER_defconfig
  17. 1 0
      drivers/crypto/fsl/Kconfig
  18. 0 1
      include/configs/B4860QDS.h
  19. 0 1
      include/configs/BSC9131RDB.h
  20. 0 1
      include/configs/BSC9132QDS.h
  21. 0 1
      include/configs/C29XPCIE.h
  22. 0 1
      include/configs/P1010RDB.h
  23. 0 1
      include/configs/P2041RDB.h
  24. 0 1
      include/configs/T102xQDS.h
  25. 0 1
      include/configs/T102xRDB.h
  26. 0 1
      include/configs/T1040QDS.h
  27. 0 1
      include/configs/T104xRDB.h
  28. 0 1
      include/configs/T208xQDS.h
  29. 0 1
      include/configs/T208xRDB.h
  30. 0 1
      include/configs/T4240QDS.h
  31. 0 1
      include/configs/T4240RDB.h
  32. 0 2
      include/configs/bcm_ep_board.h
  33. 0 2
      include/configs/controlcenterd.h
  34. 0 1
      include/configs/corenet_ds.h
  35. 0 3
      include/configs/exynos5-common.h
  36. 0 2
      include/configs/ids8313.h
  37. 0 2
      include/configs/imx6qdl_icore.h
  38. 0 2
      include/configs/imx6qdl_icore_rqs.h
  39. 0 2
      include/configs/imx6ul_geam.h
  40. 0 2
      include/configs/imx6ul_isiot.h
  41. 0 5
      include/configs/ls1021aiot.h
  42. 0 1
      include/configs/ls1021aqds.h
  43. 0 1
      include/configs/ls1021atwr.h
  44. 0 1
      include/configs/ls1043a_common.h
  45. 0 1
      include/configs/ls1046a_common.h
  46. 0 1
      include/configs/ls2080a_common.h
  47. 0 2
      include/configs/sandbox.h
  48. 2 3
      include/image.h
  49. 3 3
      lib/Makefile

+ 2 - 0
Kconfig

@@ -145,6 +145,7 @@ menu "Boot images"
 config FIT
 	bool "Support Flattened Image Tree"
 	select MD5
+	select SHA1
 	help
 	  This option allows you to boot the new uImage structure,
 	  Flattened Image Tree.  FIT is formally a FDT, which can include
@@ -159,6 +160,7 @@ if FIT
 
 config FIT_ENABLE_SHA256_SUPPORT
 	bool "Support SHA256 checksum of FIT image contents"
+	select SHA256
 	default y
 	help
 	  Enable this to support SHA256 checksum of FIT image contents. A

+ 0 - 13
README

@@ -2756,19 +2756,6 @@ The following options need to be configured:
 		Enable the hash verify command (hash -v). This adds to code
 		size a little.
 
-		CONFIG_SHA1 - This option enables support of hashing using SHA1
-		algorithm. The hash is calculated in software.
-		CONFIG_SHA256 - This option enables support of hashing using
-		SHA256 algorithm. The hash is calculated in software.
-		CONFIG_SHA_HW_ACCEL - This option enables hardware acceleration
-		for SHA1/SHA256 hashing.
-		This affects the 'hash' command and also the
-		hash_lookup_algo() function.
-		CONFIG_SHA_PROG_HW_ACCEL - This option enables
-		hardware-acceleration for SHA1/SHA256 progressive hashing.
-		Data can be streamed in a block at a time and the hashing
-		is performed in hardware.
-
 		Note: There is also a sha1sum command, which should perhaps
 		be deprecated in favour of 'hash sha1'.
 

+ 0 - 2
arch/arm/include/asm/fsl_secure_boot.h

@@ -10,8 +10,6 @@
 #ifdef CONFIG_CHAIN_OF_TRUST
 #define CONFIG_CMD_ESBC_VALIDATE
 #define CONFIG_FSL_SEC_MON
-#define CONFIG_SHA_HW_ACCEL
-#define CONFIG_SHA_PROG_HW_ACCEL
 
 #ifdef CONFIG_SPL_BUILD
 /*

+ 1 - 0
arch/arm/mach-exynos/Kconfig

@@ -17,6 +17,7 @@ config ARCH_EXYNOS5
 	bool "Exynos5 SoC family"
 	select CPU_V7
 	select BOARD_EARLY_INIT_F
+	select SHA_HW_ACCEL
 	help
 	  Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
 	  Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs

+ 0 - 1
arch/powerpc/include/asm/fsl_secure_boot.h

@@ -101,7 +101,6 @@
 
 #define CONFIG_CMD_ESBC_VALIDATE
 #define CONFIG_FSL_SEC_MON
-#define CONFIG_SHA_PROG_HW_ACCEL
 
 #ifndef CONFIG_SPL_BUILD
 /*

+ 2 - 0
board/freescale/common/Kconfig

@@ -3,5 +3,7 @@ config CHAIN_OF_TRUST
 	imply CMD_BLOB
 	select FSL_CAAM
 	select SPL_BOARD_INIT if (ARM && SPL)
+	select SHA_HW_ACCEL
+	select SHA_PROG_HW_ACCEL
 	bool
 	default y

+ 4 - 0
common/spl/Kconfig

@@ -187,6 +187,7 @@ config SPL_MD5_SUPPORT
 config SPL_SHA1_SUPPORT
 	bool "Support SHA1"
 	depends on SPL_FIT
+	select SHA1
 	help
 	  Enable this to support SHA1 in FIT images within SPL. A SHA1
 	  checksum is a 160-bit (20-byte) hash value used to check that the
@@ -198,6 +199,7 @@ config SPL_SHA1_SUPPORT
 config SPL_SHA256_SUPPORT
 	bool "Support SHA256"
 	depends on SPL_FIT
+	select SHA256
 	help
 	  Enable this to support SHA256 in FIT images within SPL. A SHA256
 	  checksum is a 256-bit (32-byte) hash value used to check that the
@@ -229,6 +231,8 @@ config SPL_CRYPTO_SUPPORT
 
 config SPL_HASH_SUPPORT
 	bool "Support hashing drivers"
+	select SHA1
+	select SHA256
 	depends on SPL
 	help
 	  Enable hashing drivers in SPL. These drivers can be used to

+ 2 - 0
configs/bcm911360_entphn-ns_defconfig

@@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_SYS_NS16550=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
 CONFIG_OF_LIBFDT=y

+ 2 - 0
configs/bcm911360_entphn_defconfig

@@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_SYS_NS16550=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
 CONFIG_OF_LIBFDT=y

+ 2 - 0
configs/bcm911360k_defconfig

@@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_SYS_NS16550=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
 CONFIG_OF_LIBFDT=y

+ 2 - 0
configs/bcm958300k-ns_defconfig

@@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_SYS_NS16550=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
 CONFIG_OF_LIBFDT=y

+ 2 - 0
configs/bcm958300k_defconfig

@@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_SYS_NS16550=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
 CONFIG_OF_LIBFDT=y

+ 2 - 0
configs/bcm958305k_defconfig

@@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_SYS_NS16550=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
 CONFIG_OF_LIBFDT=y

+ 2 - 0
configs/bcm958622hr_defconfig

@@ -16,4 +16,6 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_SYS_NS16550=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
 CONFIG_OF_LIBFDT=y

+ 1 - 0
configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig

@@ -19,3 +19,4 @@ CONFIG_DM=y
 CONFIG_SYS_NS16550=y
 CONFIG_TPM_AUTH_SESSIONS=y
 CONFIG_TPM=y
+CONFIG_SHA1=y

+ 1 - 0
configs/controlcenterd_TRAILBLAZER_defconfig

@@ -19,3 +19,4 @@ CONFIG_DM=y
 CONFIG_SYS_NS16550=y
 CONFIG_TPM_AUTH_SESSIONS=y
 CONFIG_TPM=y
+CONFIG_SHA1=y

+ 1 - 0
drivers/crypto/fsl/Kconfig

@@ -1,5 +1,6 @@
 config FSL_CAAM
 	bool "Freescale Crypto Driver Support"
+	select SHA_HW_ACCEL
 	help
 	  Enables the Freescale's Cryptographic Accelerator and Assurance
 	  Module (CAAM), also known as the SEC version 4 (SEC4). The driver uses

+ 0 - 1
include/configs/B4860QDS.h

@@ -714,7 +714,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/BSC9131RDB.h

@@ -331,7 +331,6 @@ extern unsigned long get_sdram_size(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #ifdef CONFIG_USB_EHCI_HCD

+ 0 - 1
include/configs/BSC9132QDS.h

@@ -528,7 +528,6 @@ combinations. this should be removed later
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/C29XPCIE.h

@@ -444,7 +444,6 @@
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/P1010RDB.h

@@ -738,7 +738,6 @@ extern unsigned long get_sdram_size(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/P2041RDB.h

@@ -607,7 +607,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/T102xQDS.h

@@ -868,7 +868,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #include <asm/fsl_secure_boot.h>

+ 0 - 1
include/configs/T102xRDB.h

@@ -887,7 +887,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #include <asm/fsl_secure_boot.h>

+ 0 - 1
include/configs/T1040QDS.h

@@ -671,7 +671,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/T104xRDB.h

@@ -783,7 +783,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/T208xQDS.h

@@ -755,7 +755,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/T208xRDB.h

@@ -700,7 +700,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/T4240QDS.h

@@ -501,7 +501,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 1
include/configs/T4240RDB.h

@@ -699,7 +699,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 

+ 0 - 2
include/configs/bcm_ep_board.h

@@ -69,8 +69,6 @@
 /* SHA hashing */
 #define CONFIG_CMD_HASH
 #define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
 
 /* Enable Time Command */
 

+ 0 - 2
include/configs/controlcenterd.h

@@ -199,8 +199,6 @@
 #define CONFIG_SF_DEFAULT_MODE		0
 #endif
 
-#define CONFIG_SHA1
-
 /*
  * MMC
  */

+ 0 - 1
include/configs/corenet_ds.h

@@ -621,7 +621,6 @@
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 /*

+ 0 - 3
include/configs/exynos5-common.h

@@ -26,7 +26,6 @@
 
 /* Enable ACE acceleration for SHA1 and SHA256 */
 #define CONFIG_EXYNOS_ACE_SHA
-#define CONFIG_SHA_HW_ACCEL
 
 /* Power Down Modes */
 #define S5P_CHECK_SLEEP			0x00000BAD
@@ -139,8 +138,6 @@
 /* SHA hashing */
 #define CONFIG_CMD_HASH
 #define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
 
 /* Enable Time Command */
 

+ 0 - 2
include/configs/ids8313.h

@@ -542,7 +542,5 @@
 
 #define CONFIG_IMAGE_FORMAT_LEGACY
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA1
-#define CONFIG_SHA256
 
 #endif	/* __CONFIG_H */

+ 0 - 2
include/configs/imx6qdl_icore.h

@@ -126,8 +126,6 @@
 /* FIT */
 #ifdef CONFIG_FIT
 # define CONFIG_HASH_VERIFY
-# define CONFIG_SHA1
-# define CONFIG_SHA256
 # define CONFIG_IMAGE_FORMAT_LEGACY
 #endif
 

+ 0 - 2
include/configs/imx6qdl_icore_rqs.h

@@ -108,8 +108,6 @@
 /* FIT */
 #ifdef CONFIG_FIT
 # define CONFIG_HASH_VERIFY
-# define CONFIG_SHA1
-# define CONFIG_SHA256
 # define CONFIG_IMAGE_FORMAT_LEGACY
 #endif
 

+ 0 - 2
include/configs/imx6ul_geam.h

@@ -125,8 +125,6 @@
 /* FIT */
 #ifdef CONFIG_FIT
 # define CONFIG_HASH_VERIFY
-# define CONFIG_SHA1
-# define CONFIG_SHA256
 # define CONFIG_IMAGE_FORMAT_LEGACY
 #endif
 

+ 0 - 2
include/configs/imx6ul_isiot.h

@@ -125,8 +125,6 @@
 /* FIT */
 #ifdef CONFIG_FIT
 # define CONFIG_HASH_VERIFY
-# define CONFIG_SHA1
-# define CONFIG_SHA256
 # define CONFIG_IMAGE_FORMAT_LEGACY
 #endif
 

+ 0 - 5
include/configs/ls1021aiot.h

@@ -306,13 +306,8 @@
 #define CONFIG_MISC_INIT_R
 
 /* Hash command with SHA acceleration supported in hardware */
-
 #ifdef CONFIG_FSL_CAAM
-
 #define CONFIG_CMD_HASH
-
-#define CONFIG_SHA_HW_ACCEL
-
 #endif
 
 #include <asm/fsl_secure_boot.h>

+ 0 - 1
include/configs/ls1021aqds.h

@@ -573,7 +573,6 @@ unsigned long get_board_ddr_clk(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #include <asm/fsl_secure_boot.h>

+ 0 - 1
include/configs/ls1021atwr.h

@@ -437,7 +437,6 @@
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #include <asm/fsl_secure_boot.h>

+ 0 - 1
include/configs/ls1043a_common.h

@@ -304,7 +304,6 @@
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #endif /* __LS1043A_COMMON_H */

+ 0 - 1
include/configs/ls1046a_common.h

@@ -233,7 +233,6 @@
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #endif /* __LS1046A_COMMON_H */

+ 0 - 1
include/configs/ls2080a_common.h

@@ -233,7 +233,6 @@ unsigned long long get_qixis_addr(void);
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #endif /* __LS2_COMMON_H */

+ 0 - 2
include/configs/sandbox.h

@@ -104,8 +104,6 @@
 
 #define CONFIG_CMD_HASH
 #define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
 
 #define CONFIG_CMD_SANDBOX
 

+ 2 - 3
include/image.h

@@ -30,6 +30,8 @@ struct lmb;
 #define IMAGE_ENABLE_OF_LIBFDT	1
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 #define CONFIG_FIT_ENABLE_SHA256_SUPPORT
+#define CONFIG_SHA1
+#define CONFIG_SHA256
 
 #define IMAGE_ENABLE_IGNORE	0
 #define IMAGE_INDENT_STRING	""
@@ -65,8 +67,6 @@ struct lmb;
 #  endif
 # else
 #  define CONFIG_CRC32		/* FIT images need CRC32 support */
-#  define CONFIG_SHA1		/* and SHA1 */
-#  define CONFIG_SHA256		/* and SHA256 */
 #  define IMAGE_ENABLE_CRC32	1
 #  define IMAGE_ENABLE_MD5	1
 #  define IMAGE_ENABLE_SHA1	1
@@ -86,7 +86,6 @@ struct lmb;
 
 #if defined(CONFIG_FIT_ENABLE_SHA256_SUPPORT) || \
 	defined(CONFIG_SPL_SHA256_SUPPORT)
-#define CONFIG_SHA256
 #define IMAGE_ENABLE_SHA256	1
 #else
 #define IMAGE_ENABLE_SHA256	0

+ 3 - 3
lib/Makefile

@@ -44,9 +44,9 @@ obj-$(CONFIG_BITREVERSE) += bitrev.o
 obj-y += list_sort.o
 endif
 
-obj-$(CONFIG_$(SPL_)RSA) += rsa/
-obj-$(CONFIG_$(SPL_)SHA1) += sha1.o
-obj-$(CONFIG_$(SPL_)SHA256) += sha256.o
+obj-$(CONFIG_RSA) += rsa/
+obj-$(CONFIG_SHA1) += sha1.o
+obj-$(CONFIG_SHA256) += sha256.o
 
 obj-$(CONFIG_SPL_SAVEENV) += qsort.o
 obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/