Browse Source

common/spl: Drop [ST]PL_HASH_SUPPORT in favor of [ST]PL_HASH

All of these configs exist. Stick to using CONFIG_[ST]PL_HASH, and drop all
references to CONFIG_[ST]PL_HASH_SUPPORT.  This means we need for
CHAIN_OF_TRUST to select SPL_HASH now.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[trini: Add TPL case, fix CHAIN_OF_TRUST, other tweaks]
Signed-off-by: Tom Rini <trini@konsulko.com>
Alexandru Gagniuc 2 years ago
parent
commit
0721209699

+ 1 - 0
board/freescale/common/Kconfig

@@ -4,6 +4,7 @@ config CHAIN_OF_TRUST
 	imply CMD_HASH if ARM
 	select FSL_CAAM
 	select SPL_BOARD_INIT if (ARM && SPL)
+	select SPL_HASH if (ARM && SPL)
 	select SHA_HW_ACCEL
 	select SHA_PROG_HW_ACCEL
 	select ENV_IS_NOWHERE

+ 1 - 1
common/Kconfig.boot

@@ -158,7 +158,7 @@ config SPL_FIT_SIGNATURE
 	select FIT_SIGNATURE
 	select SPL_FIT
 	select SPL_CRYPTO
-	select SPL_HASH_SUPPORT
+	select SPL_HASH
 	imply SPL_RSA
 	imply SPL_RSA_VERIFY
 	select SPL_IMAGE_SIGN_INFO

+ 1 - 3
common/Makefile

@@ -8,7 +8,6 @@ ifndef CONFIG_SPL_BUILD
 obj-y += init/
 obj-y += main.o
 obj-y += exports.o
-obj-$(CONFIG_HASH) += hash.o
 obj-$(CONFIG_HUSH_PARSER) += cli_hush.o
 obj-$(CONFIG_AUTOBOOT) += autoboot.o
 
@@ -66,8 +65,6 @@ ifdef CONFIG_SPL_BUILD
 ifdef CONFIG_SPL_DFU
 obj-$(CONFIG_DFU_OVER_USB) += dfu.o
 endif
-obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
-obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
 obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
 obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
@@ -105,6 +102,7 @@ endif
 endif
 
 obj-y += image.o
+obj-$(CONFIG_$(SPL_TPL_)HASH) += hash.o
 obj-$(CONFIG_ANDROID_AB) += android_ab.o
 obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o image-android-dt.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o

+ 1 - 22
common/spl/Kconfig

@@ -477,27 +477,6 @@ config SPL_CRYPTO
 	  this option to build the drivers in drivers/crypto as part of an
 	  SPL build.
 
-config SPL_HASH_SUPPORT
-	bool "Support hashing drivers"
-	select SHA1
-	select SHA256
-	help
-	  Enable hashing drivers in SPL. These drivers can be used to
-	  accelerate secure boot processing in secure applications. Enable
-	  this option to build system-specific drivers for hash acceleration
-	  as part of an SPL build.
-
-config TPL_HASH_SUPPORT
-	bool "Support hashing drivers in TPL"
-	depends on TPL
-	select SHA1
-	select SHA256
-	help
-	  Enable hashing drivers in SPL. These drivers can be used to
-	  accelerate secure boot processing in secure applications. Enable
-	  this option to build system-specific drivers for hash acceleration
-	  as part of an SPL build.
-
 config SPL_DMA
 	bool "Support DMA drivers"
 	help
@@ -1193,7 +1172,7 @@ config SPL_USB_ETHER
 
 config SPL_DFU
 	bool "Support DFU (Device Firmware Upgrade)"
-	select SPL_HASH_SUPPORT
+	select SPL_HASH
 	select SPL_DFU_NO_RESET
 	depends on SPL_RAM_SUPPORT
 	help

+ 0 - 1
configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig

@@ -31,7 +31,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

+ 0 - 1
configs/ls1043ardb_nand_SECURE_BOOT_defconfig

@@ -27,7 +27,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y

+ 0 - 1
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig

@@ -27,7 +27,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y

+ 0 - 1
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig

@@ -27,7 +27,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

+ 0 - 1
configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig

@@ -33,7 +33,6 @@ CONFIG_MISC_INIT_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

+ 1 - 1
include/configs/xilinx_zynqmp.h

@@ -258,7 +258,7 @@
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
 # define CONFIG_SPL_ENV_SUPPORT
-# define CONFIG_SPL_HASH_SUPPORT
+# define CONFIG_SPL_HASH
 # define CONFIG_ENV_MAX_ENTRIES	10
 #endif
 

+ 1 - 1
lib/Makefile

@@ -87,7 +87,7 @@ endif
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o
-obj-$(CONFIG_$(SPL_TPL_)HASH_SUPPORT) += crc16.o
+obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16.o
 obj-y += net_utils.o
 endif
 obj-$(CONFIG_ADDR_MAP) += addr_map.o