|
@@ -1,456 +0,0 @@
|
|
|
-// SPDX-License-Identifier: GPL-2.0+
|
|
|
-/*
|
|
|
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
|
|
|
- */
|
|
|
-
|
|
|
-#include <common.h>
|
|
|
-#include <asm/io.h>
|
|
|
-#include <asm/arch/at91_common.h>
|
|
|
-#include <asm/arch/at91_pmc.h>
|
|
|
-#include <asm/arch/at91_rstc.h>
|
|
|
-#include <asm/arch/atmel_mpddrc.h>
|
|
|
-#include <asm/arch/atmel_usba_udc.h>
|
|
|
-#include <asm/arch/gpio.h>
|
|
|
-#include <asm/arch/clk.h>
|
|
|
-#include <asm/arch/sama5d3_smc.h>
|
|
|
-#include <asm/arch/sama5d4.h>
|
|
|
-#include <atmel_hlcdc.h>
|
|
|
-#include <atmel_mci.h>
|
|
|
-#include <lcd.h>
|
|
|
-#include <mmc.h>
|
|
|
-#include <net.h>
|
|
|
-#include <netdev.h>
|
|
|
-#include <spi.h>
|
|
|
-#include <spi_flash.h>
|
|
|
-#include <spl.h>
|
|
|
-#include <version.h>
|
|
|
-
|
|
|
-DECLARE_GLOBAL_DATA_PTR;
|
|
|
-
|
|
|
-static u8 boot_mode_sf;
|
|
|
-
|
|
|
-/* FIXME gpio code here need to handle through DM_GPIO */
|
|
|
-#ifndef CONFIG_DM_SPI
|
|
|
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
|
-{
|
|
|
- return bus == 0 && cs == 0;
|
|
|
-}
|
|
|
-
|
|
|
-void spi_cs_activate(struct spi_slave *slave)
|
|
|
-{
|
|
|
- at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
|
|
|
-}
|
|
|
-
|
|
|
-void spi_cs_deactivate(struct spi_slave *slave)
|
|
|
-{
|
|
|
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
|
|
|
-}
|
|
|
-
|
|
|
-static void ma5d4evk_spi0_hw_init(void)
|
|
|
-{
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
|
|
|
-
|
|
|
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
|
|
|
-
|
|
|
- /* Enable clock */
|
|
|
- at91_periph_clk_enable(ATMEL_ID_SPI0);
|
|
|
-}
|
|
|
-#endif /* CONFIG_DM_SPI */
|
|
|
-
|
|
|
-#ifdef CONFIG_CMD_USB
|
|
|
-static void ma5d4evk_usb_hw_init(void)
|
|
|
-{
|
|
|
- at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
|
|
|
- at91_set_pio_output(AT91_PIO_PORTE, 14, 0);
|
|
|
-}
|
|
|
-#endif
|
|
|
-
|
|
|
-#ifdef CONFIG_LCD
|
|
|
-vidinfo_t panel_info = {
|
|
|
- .vl_col = 800,
|
|
|
- .vl_row = 480,
|
|
|
- .vl_clk = 33500000,
|
|
|
- .vl_bpix = LCD_BPP,
|
|
|
- .vl_tft = 1,
|
|
|
- .vl_hsync_len = 10,
|
|
|
- .vl_left_margin = 89,
|
|
|
- .vl_right_margin = 164,
|
|
|
- .vl_vsync_len = 10,
|
|
|
- .vl_upper_margin = 23,
|
|
|
- .vl_lower_margin = 10,
|
|
|
- .mmio = ATMEL_BASE_LCDC,
|
|
|
-};
|
|
|
-
|
|
|
-/* No power up/down pin for the LCD pannel */
|
|
|
-void lcd_enable(void) { /* Empty! */ }
|
|
|
-void lcd_disable(void) { /* Empty! */ }
|
|
|
-
|
|
|
-unsigned int has_lcdc(void)
|
|
|
-{
|
|
|
- return 1;
|
|
|
-}
|
|
|
-
|
|
|
-static void ma5d4evk_lcd_hw_init(void)
|
|
|
-{
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */
|
|
|
-
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
|
|
|
-
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
|
|
|
-
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
|
|
|
-
|
|
|
- /* Enable clock */
|
|
|
- at91_periph_clk_enable(ATMEL_ID_LCDC);
|
|
|
-}
|
|
|
-
|
|
|
-#endif /* CONFIG_LCD */
|
|
|
-
|
|
|
-#ifdef CONFIG_GENERIC_ATMEL_MCI
|
|
|
-/* On-SoM eMMC */
|
|
|
-void ma5d4evk_mci0_hw_init(void)
|
|
|
-{
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */
|
|
|
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */
|
|
|
-
|
|
|
- /*
|
|
|
- * As the mci io internal pull down is too strong, so if the io needs
|
|
|
- * external pull up, the pull up resistor will be very small, if so
|
|
|
- * the power consumption will increase, so disable the internal pull
|
|
|
- * down to save the power.
|
|
|
- */
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
|
|
|
-
|
|
|
- /* Enable clock */
|
|
|
- at91_periph_clk_enable(ATMEL_ID_MCI0);
|
|
|
-}
|
|
|
-
|
|
|
-/* On-board MicroSD slot */
|
|
|
-void ma5d4evk_mci1_hw_init(void)
|
|
|
-{
|
|
|
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
|
|
|
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
|
|
|
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
|
|
|
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
|
|
|
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
|
|
|
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
|
|
|
-
|
|
|
- /*
|
|
|
- * As the mci io internal pull down is too strong, so if the io needs
|
|
|
- * external pull up, the pull up resistor will be very small, if so
|
|
|
- * the power consumption will increase, so disable the internal pull
|
|
|
- * down to save the power.
|
|
|
- */
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
|
|
|
-
|
|
|
- /* Deal with WP pin on the microSD slot. */
|
|
|
- at91_set_pio_output(AT91_PIO_PORTE, 16, 0);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
|
|
|
-
|
|
|
- /* Enable clock */
|
|
|
- at91_periph_clk_enable(ATMEL_ID_MCI1);
|
|
|
-}
|
|
|
-
|
|
|
-int board_mmc_init(bd_t *bis)
|
|
|
-{
|
|
|
- int ret;
|
|
|
- void *mci0 = (void *)ATMEL_BASE_MCI0;
|
|
|
- void *mci1 = (void *)ATMEL_BASE_MCI1;
|
|
|
-
|
|
|
- /* De-assert reset on On-SoM eMMC */
|
|
|
- at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
|
|
|
-
|
|
|
- ret = atmel_mci_init(boot_mode_sf ? mci0 : mci1);
|
|
|
- if (ret) /* eMMC init failed, skip it. */
|
|
|
- at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
|
|
|
-
|
|
|
- /* Enable the power supply to On-board MicroSD */
|
|
|
- at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
|
|
|
- ret = atmel_mci_init(boot_mode_sf ? mci1 : mci0);
|
|
|
- if (ret) /* uSD init failed, power it down. */
|
|
|
- at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-#endif /* CONFIG_GENERIC_ATMEL_MCI */
|
|
|
-
|
|
|
-#ifdef CONFIG_MACB
|
|
|
-void ma5d4evk_macb0_hw_init(void)
|
|
|
-{
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
|
|
|
-
|
|
|
- /* Enable clock */
|
|
|
- at91_periph_clk_enable(ATMEL_ID_GMAC0);
|
|
|
-}
|
|
|
-#endif
|
|
|
-
|
|
|
-static void ma5d4evk_serial_hw_init(void)
|
|
|
-{
|
|
|
- /* USART0 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */
|
|
|
- at91_periph_clk_enable(ATMEL_ID_USART0);
|
|
|
-
|
|
|
- /* USART1 */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */
|
|
|
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */
|
|
|
- at91_periph_clk_enable(ATMEL_ID_USART1);
|
|
|
-}
|
|
|
-
|
|
|
-int board_early_init_f(void)
|
|
|
-{
|
|
|
- at91_periph_clk_enable(ATMEL_ID_PIOA);
|
|
|
- at91_periph_clk_enable(ATMEL_ID_PIOB);
|
|
|
- at91_periph_clk_enable(ATMEL_ID_PIOC);
|
|
|
- at91_periph_clk_enable(ATMEL_ID_PIOD);
|
|
|
- at91_periph_clk_enable(ATMEL_ID_PIOE);
|
|
|
-
|
|
|
- /* Configure LEDs as OFF */
|
|
|
- at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
|
|
|
- at91_set_pio_output(AT91_PIO_PORTD, 29, 0);
|
|
|
- at91_set_pio_output(AT91_PIO_PORTD, 30, 0);
|
|
|
-
|
|
|
- ma5d4evk_serial_hw_init();
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static void board_identify(void)
|
|
|
-{
|
|
|
- struct spi_flash *sf;
|
|
|
- sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
|
|
|
- CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
|
|
|
- boot_mode_sf = (sf != NULL);
|
|
|
-}
|
|
|
-
|
|
|
-int board_init(void)
|
|
|
-{
|
|
|
- /* adress of boot parameters */
|
|
|
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
-
|
|
|
-#ifndef CONFIG_DM_SPI
|
|
|
- ma5d4evk_spi0_hw_init();
|
|
|
-#endif
|
|
|
-#ifdef CONFIG_GENERIC_ATMEL_MCI
|
|
|
- ma5d4evk_mci0_hw_init();
|
|
|
- ma5d4evk_mci1_hw_init();
|
|
|
-#endif
|
|
|
-#ifdef CONFIG_MACB
|
|
|
- ma5d4evk_macb0_hw_init();
|
|
|
-#endif
|
|
|
-#ifdef CONFIG_LCD
|
|
|
- ma5d4evk_lcd_hw_init();
|
|
|
-#endif
|
|
|
-#ifdef CONFIG_CMD_USB
|
|
|
- ma5d4evk_usb_hw_init();
|
|
|
-#endif
|
|
|
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
|
|
|
- at91_udp_hw_init();
|
|
|
-#endif
|
|
|
-
|
|
|
- board_identify();
|
|
|
-
|
|
|
- /* Reset CAN controllers */
|
|
|
- at91_set_pio_output(AT91_PIO_PORTB, 21, 0);
|
|
|
- udelay(100);
|
|
|
- at91_set_pio_output(AT91_PIO_PORTB, 21, 1);
|
|
|
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-int board_late_init(void)
|
|
|
-{
|
|
|
- env_set("bootmode", boot_mode_sf ? "sf" : "emmc");
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-int dram_init(void)
|
|
|
-{
|
|
|
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
|
- CONFIG_SYS_SDRAM_SIZE);
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-int board_eth_init(bd_t *bis)
|
|
|
-{
|
|
|
- int rc = 0;
|
|
|
-
|
|
|
-#ifdef CONFIG_MACB
|
|
|
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
|
|
|
-#endif
|
|
|
-
|
|
|
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
|
|
|
- usba_udc_probe(&pdata);
|
|
|
-#ifdef CONFIG_USB_ETH_RNDIS
|
|
|
- usb_eth_initialize(bis);
|
|
|
-#endif
|
|
|
-#endif
|
|
|
-
|
|
|
- return rc;
|
|
|
-}
|
|
|
-
|
|
|
-/* SPL */
|
|
|
-#ifdef CONFIG_SPL_BUILD
|
|
|
-void spl_board_init(void)
|
|
|
-{
|
|
|
-#ifndef CONFIG_DM_SPI
|
|
|
- ma5d4evk_spi0_hw_init();
|
|
|
-#endif
|
|
|
-#ifdef CONFIG_GENERIC_ATMEL_MCI
|
|
|
- ma5d4evk_mci0_hw_init();
|
|
|
- ma5d4evk_mci1_hw_init();
|
|
|
-#endif
|
|
|
- board_identify();
|
|
|
-}
|
|
|
-
|
|
|
-void board_boot_order(u32 *spl_boot_list)
|
|
|
-{
|
|
|
- spl_boot_list[0] = spl_boot_device();
|
|
|
-
|
|
|
- switch (spl_boot_list[0]) {
|
|
|
- case BOOT_DEVICE_MMC1:
|
|
|
- case BOOT_DEVICE_MMC2:
|
|
|
- spl_boot_list[0] = BOOT_DEVICE_MMC1;
|
|
|
- break;
|
|
|
- case BOOT_DEVICE_SPI:
|
|
|
- break;
|
|
|
- case BOOT_DEVICE_USB:
|
|
|
- spl_boot_list[0] = BOOT_DEVICE_MMC2;
|
|
|
- break;
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
|
|
|
-{
|
|
|
- ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
|
|
|
-
|
|
|
- ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
|
|
|
- ATMEL_MPDDRC_CR_NR_ROW_13 |
|
|
|
- ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
|
|
|
- ATMEL_MPDDRC_CR_NB_8BANKS |
|
|
|
- ATMEL_MPDDRC_CR_NDQS_DISABLED |
|
|
|
- ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
|
|
|
-
|
|
|
- ddr2->rtr = 0x2b0;
|
|
|
-
|
|
|
- ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
|
|
|
- 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
|
|
|
- 3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
|
|
|
- 10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
|
|
|
- 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
|
|
|
- 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
|
|
|
- 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
|
|
|
- 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
|
|
|
-
|
|
|
- ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
|
|
|
- 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
|
|
|
- 25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
|
|
|
- 23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
|
|
|
-
|
|
|
- ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
|
|
|
- 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
|
|
|
- 3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
|
|
|
- 2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
|
|
|
- 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
|
|
|
-}
|
|
|
-
|
|
|
-void mem_init(void)
|
|
|
-{
|
|
|
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
- struct atmel_mpddrc_config ddr2;
|
|
|
-
|
|
|
- ddr2_conf(&ddr2);
|
|
|
-
|
|
|
- /* enable MPDDR clock */
|
|
|
- at91_periph_clk_enable(ATMEL_ID_MPDDRC);
|
|
|
- writel(AT91_PMC_DDR, &pmc->scer);
|
|
|
-
|
|
|
- /* DDRAM2 Controller initialize */
|
|
|
- ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
|
|
|
-}
|
|
|
-
|
|
|
-void at91_pmc_init(void)
|
|
|
-{
|
|
|
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
- u32 tmp;
|
|
|
-
|
|
|
- tmp = AT91_PMC_PLLAR_29 |
|
|
|
- AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
|
|
|
- AT91_PMC_PLLXR_MUL(87) |
|
|
|
- AT91_PMC_PLLXR_DIV(1);
|
|
|
- at91_plla_init(tmp);
|
|
|
-
|
|
|
- writel(0x0 << 8, &pmc->pllicpr);
|
|
|
-
|
|
|
- tmp = AT91_PMC_MCKR_H32MXDIV |
|
|
|
- AT91_PMC_MCKR_PLLADIV_2 |
|
|
|
- AT91_PMC_MCKR_MDIV_3 |
|
|
|
- AT91_PMC_MCKR_CSS_PLLA;
|
|
|
- at91_mck_init(tmp);
|
|
|
-}
|
|
|
-#endif
|