Browse Source

moveconfig: prepare moving CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig step 1

Some boards have coded this offset with formula or bitshifts in their
board-config. Manually convert these things into hex-values to be able
using moveconfig.py afterwards.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Hannes Schmelzer 4 years ago
parent
commit
015287919f

+ 1 - 1
doc/README.rockchip

@@ -559,7 +559,7 @@ header and skipping every second 2KB block. Then the U-Boot image is written at
 offset 128KB and the whole image is padded to 4MB which is the SPI flash size.
 The position of U-Boot is controlled with this setting in U-Boot:
 
-   #define CONFIG_SYS_SPI_U_BOOT_OFFS	(128 << 10)
+   #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 If you have a Dediprog em100pro connected then you can write the image with:
 

+ 1 - 1
include/configs/cgtqmx6eval.h

@@ -17,7 +17,7 @@
 #define CONFIG_MACH_TYPE	4122
 
 #ifdef CONFIG_SPL
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 #include "imx6_spl.h"
 #endif
 

+ 1 - 1
include/configs/cl-som-imx7.h

@@ -166,7 +166,7 @@
 /* SPL */
 #include "imx7_spl.h"
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 #endif /* CONFIG_SPL_BUILD */
 
 #endif	/* __CONFIG_H */

+ 1 - 1
include/configs/cm_fx6.h

@@ -207,7 +207,7 @@
 
 /* SPL */
 #include "imx6_spl.h"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 
 /* Display */
 #define CONFIG_IMX_HDMI

+ 1 - 1
include/configs/cm_t43.h

@@ -114,7 +114,7 @@
 
 /* SPL defines. */
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 
 /* EEPROM */

+ 1 - 1
include/configs/el6x_common.h

@@ -20,7 +20,7 @@
 #define CONFIG_MXC_UART
 
 #ifdef CONFIG_SPL
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 #include "imx6_spl.h"
 #endif
 

+ 1 - 1
include/configs/ot1200.h

@@ -59,7 +59,7 @@
 /* SPL */
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
 #endif
 
 #define CONFIG_FEC_MXC

+ 1 - 1
include/configs/pcm058.h

@@ -8,7 +8,7 @@
 #define __PCM058_CONFIG_H
 
 #ifdef CONFIG_SPL
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 #include "imx6_spl.h"
 #endif
 

+ 1 - 1
include/configs/pfla02.h

@@ -8,7 +8,7 @@
 #define __PCM058_CONFIG_H
 
 #ifdef CONFIG_SPL
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 #include "imx6_spl.h"
 #endif
 

+ 1 - 1
include/configs/rk3128_common.h

@@ -26,7 +26,7 @@
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* 64M */
 
 /* RAW SD card / eMMC locations. */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(128 << 10)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SYS_SDRAM_BASE		0x60000000

+ 1 - 1
include/configs/rk3288_common.h

@@ -29,7 +29,7 @@
 #define CONFIG_IRAM_BASE		0xff700000
 
 /* RAW SD card / eMMC locations. */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(128 << 10)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 /* FAT sd card locations. */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1

+ 1 - 1
include/configs/rk3328_common.h

@@ -24,7 +24,7 @@
 
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* 64M */
 
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(128 << 10)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 /* FAT sd card locations. */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1

+ 1 - 1
include/configs/rk3399_common.h

@@ -38,7 +38,7 @@
 #define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ	200000000
 
 /* RAW SD card / eMMC locations. */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(128 << 10)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 /* FAT sd card locations. */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1