1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * Copyright (C) 2018 Marek Behun <marek.behun@nic.cz>
- *
- * Based on mvebu_armada-37xx.h by Stefan Roese <sr@denx.de>
- */
- #ifndef _CONFIG_TURRIS_MOX_H
- #define _CONFIG_TURRIS_MOX_H
- #define CONFIG_SYS_BOOTM_LEN (64 << 20)
- #define CONFIG_LAST_STAGE_INIT
- /*
- * High Level Configuration Options (easy to change)
- */
- #define CONFIG_DISPLAY_BOARDINFO_LATE
- /* additions for new ARM relocation support */
- #define CONFIG_SYS_SDRAM_BASE 0x00000000
- /* auto boot */
- #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400, 460800, 921600 }
- /*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
- #define CONFIG_INITRD_TAG /* enable INITRD tag */
- #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
- #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
- /*
- * Size of malloc() pool
- */
- #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
- /*
- * Other required minimal configurations
- */
- #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
- #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
- #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
- /* End of 16M scrubbed by training in bootrom */
- #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
- /*
- * I2C
- */
- #define CONFIG_I2C_MV
- #define CONFIG_SYS_I2C_SLAVE 0x0
- /* Environment in SPI NOR flash */
- /*
- * Ethernet Driver configuration
- */
- #define CONFIG_ARP_TIMEOUT 200
- #define CONFIG_NET_RETRY_COUNT 50
- #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
- #define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(USB, usb, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
- #include <config_distro_bootcmd.h>
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "scriptaddr=0x4d00000\0" \
- "pxefile_addr_r=0x4e00000\0" \
- "fdt_addr_r=0x4f00000\0" \
- "kernel_addr_r=0x5000000\0" \
- "ramdisk_addr_r=0x8000000\0" \
- BOOTENV
- #endif /* _CONFIG_TURRIS_MOX_H */
|