smdkv310.h 2.0 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374
  1. /* SPDX-License-Identifier: GPL-2.0+ */
  2. /*
  3. * Copyright (C) 2011 Samsung Electronics
  4. *
  5. * Configuration settings for the SAMSUNG SMDKV310 (EXYNOS4210) board.
  6. */
  7. #ifndef __CONFIG_H
  8. #define __CONFIG_H
  9. #include "exynos4-common.h"
  10. #undef CONFIG_BOARD_COMMON
  11. #undef CONFIG_USB_GADGET_DWC2_OTG_PHY
  12. #undef CONFIG_REVISION_TAG
  13. /* High Level Configuration Options */
  14. #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
  15. /* Mach Type */
  16. #define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310
  17. #define CONFIG_SYS_SDRAM_BASE 0x40000000
  18. /* Handling Sleep Mode*/
  19. #define S5P_CHECK_SLEEP 0x00000BAD
  20. #define S5P_CHECK_DIDLE 0xBAD00000
  21. #define S5P_CHECK_LPA 0xABAD0000
  22. /* MMC SPL */
  23. #define CONFIG_SKIP_LOWLEVEL_INIT
  24. #define COPY_BL2_FNPTR_ADDR 0x00002488
  25. #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
  26. /* memtest works on */
  27. #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
  28. /* SMDKV310 has 4 bank of DRAM */
  29. #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
  30. #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
  31. #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
  32. #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
  33. #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
  34. #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
  35. #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
  36. #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
  37. #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
  38. /* FLASH and environment organization */
  39. #define CONFIG_CLK_1000_400_200
  40. /* MIU (Memory Interleaving Unit) */
  41. #define CONFIG_MIU_2BIT_INTERLEAVED
  42. #define RESERVE_BLOCK_SIZE (512)
  43. #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
  44. #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
  45. #define CONFIG_SYS_INIT_SP_ADDR 0x02040000
  46. /* U-Boot copy size from boot Media to DRAM.*/
  47. #define COPY_BL2_SIZE 0x80000
  48. #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
  49. #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512)
  50. /* Ethernet Controllor Driver */
  51. #ifdef CONFIG_CMD_NET
  52. #define CONFIG_ENV_SROM_BANK 1
  53. #endif /*CONFIG_CMD_NET*/
  54. #endif /* __CONFIG_H */