123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * (C) Copyright 2011-2012
- * Pali Rohár <pali@kernel.org>
- *
- * (C) Copyright 2010
- * Alistair Buxton <a.j.buxton@gmail.com>
- *
- * Derived from Beagle Board code:
- * (C) Copyright 2006-2008
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- *
- * Configuration settings for the Nokia RX-51 aka N900.
- */
- #ifndef __CONFIG_H
- #define __CONFIG_H
- /*
- * High Level Configuration Options
- */
- #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
- #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
- #include <asm/arch/cpu.h> /* get chip and board defs */
- #include <asm/arch/omap.h>
- #include <asm/arch/mem.h>
- #include <linux/stringify.h>
- /* Clock Defines */
- #define V_OSCK 26000000 /* Clock output from T2 */
- #define V_SCLK (V_OSCK >> 1)
- #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
- #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
- #define CONFIG_INITRD_TAG /* enable passing initrd */
- #define CONFIG_REVISION_TAG /* enable passing revision tag*/
- #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
- /*
- * Size of malloc() pool
- */
- #define CONFIG_UBI_SIZE (512 << 10)
- #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
- (128 << 10))
- /*
- * Hardware drivers
- */
- /*
- * NS16550 Configuration
- */
- #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
- #define CONFIG_SYS_NS16550_SERIAL
- #define CONFIG_SYS_NS16550_REG_SIZE (-4)
- #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
- /*
- * select serial console configuration
- */
- #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
- #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
- /* USB device configuration */
- #define CONFIG_USB_DEVICE
- #define CONFIG_USBD_VENDORID 0x0421
- #define CONFIG_USBD_PRODUCTID 0x01c8
- #define CONFIG_USBD_MANUFACTURER "Nokia"
- #define CONFIG_USBD_PRODUCT_NAME "N900"
- #define GPIO_SLIDE 71
- /*
- * Board ONENAND Info.
- */
- #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
- /* Watchdog support */
- #define CONFIG_HW_WATCHDOG
- /*
- * Framebuffer
- */
- /* Video console */
- #define CONFIG_VIDEO_LOGO
- #define VIDEO_FB_16BPP_PIXEL_SWAP
- #define VIDEO_FB_16BPP_WORD_SWAP
- /* functions for cfb_console */
- #define VIDEO_KBD_INIT_FCT rx51_kp_init()
- #define VIDEO_TSTC_FCT rx51_kp_tstc
- #define VIDEO_GETC_FCT rx51_kp_getc
- #ifndef __ASSEMBLY__
- struct stdio_dev;
- int rx51_kp_init(void);
- int rx51_kp_tstc(struct stdio_dev *sdev);
- int rx51_kp_getc(struct stdio_dev *sdev);
- #endif
- /* Environment information */
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "usbtty=cdc_acm\0" \
- "stdin=serial,vga\0" \
- "stdout=serial,vga\0" \
- "stderr=serial,vga\0" \
- "setcon=setenv stdin ${con};" \
- "setenv stdout ${con};" \
- "setenv stderr ${con}\0" \
- "sercon=setenv con serial; run setcon\0" \
- "usbcon=setenv con usbtty; run setcon\0" \
- "vgacon=setenv con vga; run setcon\0" \
- "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
- "switchmmc=mmc dev ${mmcnum}\0" \
- "kernaddr=0x82008000\0" \
- "initrdaddr=0x84008000\0" \
- "scriptaddr=0x86008000\0" \
- "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
- "${loadaddr} ${mmcfile}\0" \
- "kernload=setenv loadaddr ${kernaddr};" \
- "setenv mmcfile ${mmckernfile};" \
- "run fileload\0" \
- "initrdload=setenv loadaddr ${initrdaddr};" \
- "setenv mmcfile ${mmcinitrdfile};" \
- "run fileload\0" \
- "scriptload=setenv loadaddr ${scriptaddr};" \
- "setenv mmcfile ${mmcscriptfile};" \
- "run fileload\0" \
- "scriptboot=echo Running ${mmcscriptfile} from mmc " \
- "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
- "kernboot=echo Booting ${mmckernfile} from mmc " \
- "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
- "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
- "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
- "attachboot=echo Booting attached kernel image ...;" \
- "setenv setup_omap_atag 1;" \
- "bootm ${attkernaddr};" \
- "setenv setup_omap_atag\0" \
- "trymmcscriptboot=if run switchmmc; then " \
- "if run scriptload; then " \
- "run scriptboot;" \
- "fi;" \
- "fi\0" \
- "trymmckernboot=if run switchmmc; then " \
- "if run kernload; then " \
- "run kernboot;" \
- "fi;" \
- "fi\0" \
- "trymmckerninitrdboot=if run switchmmc; then " \
- "if run initrdload; then " \
- "if run kernload; then " \
- "run kerninitrdboot;" \
- "fi;" \
- "fi; " \
- "fi\0" \
- "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
- "setenv mmckernfile uImage; run trymmckernboot\0" \
- "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
- "setenv mmcpart 2; run trymmcpartboot;" \
- "setenv mmcpart 3; run trymmcpartboot;" \
- "setenv mmcpart 4; run trymmcpartboot\0" \
- "trymmcboot=if run switchmmc; then " \
- "setenv mmctype fat;" \
- "run trymmcallpartboot;" \
- "setenv mmctype ext2;" \
- "run trymmcallpartboot;" \
- "setenv mmctype ext4;" \
- "run trymmcallpartboot;" \
- "fi\0" \
- "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
- "sdboot=setenv mmcnum 0; run trymmcboot\0" \
- "preboot=setenv mmcnum 1; setenv mmcpart 1;" \
- "setenv mmcscriptfile bootmenu.scr;" \
- "if run switchmmc; then " \
- "setenv mmcdone true;" \
- "setenv mmctype fat;" \
- "if run scriptload; then true; else " \
- "setenv mmctype ext2;" \
- "if run scriptload; then true; else " \
- "setenv mmctype ext4;" \
- "if run scriptload; then true; else " \
- "setenv mmcdone false;" \
- "fi;" \
- "fi;" \
- "fi;" \
- "if ${mmcdone}; then " \
- "run scriptboot;" \
- "fi;" \
- "fi;" \
- "if run slide; then true; else " \
- "setenv bootmenu_delay 0;" \
- "setenv bootdelay 0;" \
- "fi\0" \
- "menucmd=bootmenu\0" \
- "bootmenu_0=Attached kernel=run attachboot\0" \
- "bootmenu_1=Internal eMMC=run emmcboot\0" \
- "bootmenu_2=External SD card=run sdboot\0" \
- "bootmenu_3=U-Boot boot order=boot\0" \
- "bootmenu_delay=30\0" \
- ""
- #define CONFIG_POSTBOOTMENU \
- "echo;" \
- "echo Extra commands:;" \
- "echo run sercon - Use serial port for control.;" \
- "echo run usbcon - Use usbtty for control.;" \
- "echo run vgacon - Use framebuffer/keyboard.;" \
- "echo run sdboot - Boot from SD card slot.;" \
- "echo run emmcboot - Boot internal eMMC memory.;" \
- "echo run attachboot - Boot attached kernel image.;" \
- "echo"
- #define CONFIG_BOOTCOMMAND \
- "run sdboot;" \
- "run emmcboot;" \
- "run attachboot;" \
- "echo"
- /* default load address */
- #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
- /*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
- #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
- #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
- /*
- * Physical Memory Map
- */
- #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
- /*
- * FLASH and environment organization
- */
- #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
- #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
- #define CONFIG_SYS_INIT_RAM_SIZE 0x800
- #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
- /*
- * Attached kernel image
- */
- #define SDRAM_SIZE 0x10000000 /* 256 MB */
- #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
- #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
- #define KERNEL_OFFSET 0x40000 /* 256 kB */
- #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
- #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
- /* Reserve protected RAM for attached kernel */
- #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
- #endif /* __CONFIG_H */
|