1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * Copyright (C) 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
- #ifndef __CONFIG_H_
- #define __CONFIG_H_
- #include <asm/arch/imx-regs.h>
- #include <linux/sizes.h>
- #define CONFIG_SYS_FSL_CLK
- /* Size of malloc() pool */
- #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
- /* USB Configs */
- #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
- #define CONFIG_MXC_USB_FLAGS 0
- #define CONFIG_SYS_I2C_MXC
- #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
- #define CONFIG_SYS_EEPROM_BUS_NUM 1
- #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
- /* Command definition */
- #define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "console=ttymxc1,115200\0" \
- "fdt_addr=0x75000000\0" \
- "fdt_high=0xffffffff\0" \
- "scriptaddr=0x74000000\0" \
- "kernel_file=fitImage\0"\
- "silent=1\0"\
- "rdinit=/sbin/init\0" \
- "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
- "upd_image=st.4k\0" \
- "uboot_file=u-boot.imx\0" \
- "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \
- "initrd_ram_dev=/dev/ram\0" \
- "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
- "addkeys=setenv bootargs ${bootargs} di=${dig_in} key1=${key1}\0" \
- "loadusb=usb start; " \
- "fatload usb 0 ${loadaddr} ${upd_image}\0" \
- "up=if tftp ${loadaddr} ${uboot_file}; then " \
- "setexpr blkc ${filesize} / 0x200; " \
- "setexpr blkc ${blkc} + 1; " \
- "mmc write ${loadaddr} 0x2 ${blkc}" \
- "; fi\0" \
- "upwic=setenv wic_file kp-image-kp${boardsoc}.wic; "\
- "if tftp ${loadaddr} ${wic_file}; then " \
- "setexpr blkc ${filesize} / 0x200; " \
- "setexpr blkc ${blkc} + 1; " \
- "mmc write ${loadaddr} 0x0 ${blkc}" \
- "; fi\0" \
- "usbupd=echo Booting update from usb ...; " \
- "setenv bootargs; " \
- "run updargs; " \
- "run addinitrd; " \
- "run addswupdate; " \
- "run addkeys; " \
- "run loadusb; " \
- "bootm ${loadaddr}#${fit_config}\0" \
- BOOTENV
- #define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd"
- #define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(DHCP, dhcp, na)
- #include <config_distro_bootcmd.h>
- #define CONFIG_ARP_TIMEOUT 200UL
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
- #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
- /* Physical Memory Map */
- #define PHYS_SDRAM_1 CSD0_BASE_ADDR
- #define PHYS_SDRAM_1_SIZE (512 * SZ_1M)
- #define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE)
- #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
- #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
- #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
- #define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
- #define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
- /* environment organization */
- #endif /* __CONFIG_H_ */
|