gplugd.h 1.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475
  1. /* SPDX-License-Identifier: GPL-2.0+ */
  2. /*
  3. * (C) Copyright 2011
  4. * eInfochips Ltd. <www.einfochips.com>
  5. * Written-by: Ajay Bhargav <contact@8051projects.net>
  6. *
  7. * Based on Aspenite:
  8. * (C) Copyright 2010
  9. * Marvell Semiconductor <www.marvell.com>
  10. * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  11. * Contributor: Mahavir Jain <mjain@marvell.com>
  12. */
  13. #ifndef __CONFIG_GPLUGD_H
  14. #define __CONFIG_GPLUGD_H
  15. /*
  16. * High Level Configuration Options
  17. */
  18. #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
  19. #define CONFIG_ARMADA100 1 /* SOC Family Name */
  20. #define CONFIG_ARMADA168 1 /* SOC Used on this Board */
  21. #define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
  22. #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
  23. /*
  24. * There is no internal RAM in ARMADA100, using DRAM
  25. * TBD: dcache to be used for this
  26. */
  27. #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
  28. /* Network configuration */
  29. #ifdef CONFIG_CMD_NET
  30. #define CONFIG_ARMADA100_FEC
  31. /* DHCP Support */
  32. #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
  33. #endif /* CONFIG_CMD_NET */
  34. /* GPIO Support */
  35. #define CONFIG_MARVELL_GPIO
  36. /* PHY configuration */
  37. #define CONFIG_RESET_PHY_R
  38. /* 88E3015 register definition */
  39. #define PHY_LED_PAR_SEL_REG 22
  40. #define PHY_LED_MAN_REG 25
  41. #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
  42. /* GPIO Configuration for PHY */
  43. #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
  44. /* Flash Support */
  45. /*
  46. * mv-common.h should be defined after CMD configs since it used them
  47. * to enable certain macros
  48. */
  49. #include "mv-common.h"
  50. #ifdef CONFIG_SYS_NS16550_COM1
  51. #undef CONFIG_SYS_NS16550_COM1
  52. #endif /* CONFIG_SYS_NS16550_COM1 */
  53. #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
  54. /*
  55. * Environment variables configurations
  56. */
  57. #ifdef CONFIG_CMD_USB
  58. #define CONFIG_USB_EHCI_ARMADA100
  59. #define CONFIG_EHCI_IS_TDI
  60. #endif /* CONFIG_CMD_USB */
  61. #endif /* __CONFIG_GPLUGD_H */