封欢 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 年之前
..
Kconfig 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 年之前
MAINTAINERS 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 年之前
Makefile 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 年之前
README 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 年之前
board.c 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 年之前

README

How to use U-Boot on Grinn's liteBoard
--------------------------------------

- Build U-Boot for liteBoard:

$ make mrproper
$ make liteboard_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the micro SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the micro SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Jumper settings:

S1: 0 1 0 1 1 1

where 0 means bottom position and 1 means top position (from the
switch label numbers reference).

- Insert the micro SD card in the board.

- Connect USB cable between liteBoard and the PC for the power and console.

- U-Boot messages should come up.