123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * Copyright (C) 2018 Allied Telesis Labs
- */
- #ifndef _CONFIG_X530_H
- #define _CONFIG_X530_H
- /*
- * High Level Configuration Options (easy to change)
- */
- #define CONFIG_DISPLAY_BOARDINFO_LATE
- #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
- /*
- * NS16550 Configuration
- */
- #define CONFIG_SYS_NS16550_SERIAL
- #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
- #if !defined(CONFIG_DM_SERIAL)
- #define CONFIG_SYS_NS16550_REG_SIZE (-4)
- #define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE
- #endif
- /*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
- /* NAND */
- #define CONFIG_SYS_NAND_ONFI_DETECTION
- #define CONFIG_SYS_MAX_NAND_DEVICE 1
- #define BBT_CUSTOM_SCAN
- #define BBT_CUSTOM_SCAN_PAGE 0
- #define BBT_CUSTOM_SCAN_POSITION 2048
- /* SPI NOR flash default params, used by sf commands */
- #define MTDIDS_DEFAULT "nand0=nand"
- #define MTDPARTS_DEFAULT "mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)"
- #define MTDPARTS_MTDOOPS "errlog"
- /* Partition support */
- /* Additional FS support/configuration */
- /* USB/EHCI configuration */
- #define CONFIG_EHCI_IS_TDI
- /* Environment in SPI NOR flash */
- #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
- /* PCIe support */
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_PCI_SCAN_SHOW
- #endif
- /* NAND */
- #define CONFIG_SYS_NAND_ONFI_DETECTION
- #define CONFIG_SYS_MALLOC_LEN (4 << 20)
- #include <asm/arch/config.h>
- /*
- * Other required minimal configurations
- */
- #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
- /* Keep device tree and initrd in low memory so the kernel can access them */
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_high=0x10000000\0" \
- "initrd_high=0x10000000\0"
- #define CONFIG_SYS_LOAD_ADDR 0x1000000
- #define CONFIG_UBI_PART user
- #define CONFIG_UBIFS_VOLUME user
- /* SPL */
- /* Defines for SPL */
- #define CONFIG_SPL_SIZE (140 << 10)
- #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
- #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
- #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
- #ifdef CONFIG_SPL_BUILD
- #define CONFIG_SYS_MALLOC_SIMPLE
- #endif
- #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
- #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
- /* SPL related SPI defines */
- #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
- #endif /* _CONFIG_X530_H */
|