1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980 |
- require sd-image.inc
- DEPENDS:starfive-visionfive2 += "opensbi starfive-tool-native"
- DEPENDS:starfive-jh8100 += "u-boot-starfive"
- # Generate QSPI firmware & SD rootfs for Dubhe (NFS rootfs will be auto-generated by default IMAGE_FSTYPES, which is tar.gz)
- IMAGE_FSTYPES:starfive-dubhe += "\
- qspi \
- qspi_sd \
- tar.gz \
- "
- IMAGE_TYPEDEP:qspi_sd = "ext4 wic wic.gz wic.bmap"
- do_image_qspi[depends] += "\
- deploy-bootfiles:do_deploy \
- u-boot-starfive:do_deploy \
- dubhe-image-initramfs:do_rootfs \
- "
- IMAGE_FEATURES += " allow-empty-password empty-root-password"
- IMAGE_INSTALL += " \
- packagegroup-starfive-essentials \
- systemd-analyze \
- e2fsprogs-resize2fs \
- parted \
- "
- IMAGE_INSTALL:starfive-dubhe += "\
- packagegroup-core-boot \
- ${CORE_IMAGE_EXTRA_INSTALL} \
- packagegroup-starfive-essentials \
- packagegroup-starfive-dubhe-essentials \
- "
- IMAGE_INSTALL:starfive-jh8100 += "\
- i3c-tools \
- "
- TOOLCHAIN_TARGET_TASK += "packagegroup-starfive-toolchain"
- # Generate a boot firmware image that contains bootcode, bootjump, U-Boot SPL, U-Boot proper & OpenSBI
- IMAGE_CMD:qspi() {
- dd if=${DEPLOY_DIR_IMAGE}/bootcode.bin of=${DEPLOY_DIR_IMAGE}/${MACHINE}-qspi-firmware.bin bs=32 seek=0 count=128
- dd if=${DEPLOY_DIR_IMAGE}/bootjump.bin of=${DEPLOY_DIR_IMAGE}/${MACHINE}-qspi-firmware.bin bs=32 seek=128 count=128
- dd if=${DEPLOY_DIR_IMAGE}/u-boot-spl.bin of=${DEPLOY_DIR_IMAGE}/${MACHINE}-qspi-firmware.bin bs=32 seek=256 count=8192
- dd if=${DEPLOY_DIR_IMAGE}/u-boot.itb of=${DEPLOY_DIR_IMAGE}/${MACHINE}-qspi-firmware.bin bs=32 seek=8448 count=32768
- }
- # Generate SD image using bmaptool
- IMAGE_CMD:qspi_sd() {
- cd ${IMGDEPLOYDIR}
- bmaptool copy ${PN}-${MACHINE}.wic.gz ${DEPLOY_DIR_IMAGE}/Image-sd-${MACHINE}.img
- }
- # Set image naming as such: Image-<boot_mode>-<machine>
- # Image-initramfs-starfive-dubhe (initramfs boot)
- # Image-nfs-starfive-dubhe (NFS boot)
- # Image-sd-starfive-dubhe (SD boot)
- # Create an output folder for all machine variations across Dubhe series
- do_create_output_folder() {
- }
- do_create_output_folder:starfive-dubhe() {
- rm -rf ${DEPLOY_DIR_IMAGE}/Dubhe-*0
- mkdir -p ${DEPLOY_DIR_IMAGE}/Dubhe-80
- cp ${DEPLOY_DIR_IMAGE}/${MACHINE}-qspi-firmware.bin ${DEPLOY_DIR_IMAGE}/Dubhe-80
- cp ${DEPLOY_DIR_IMAGE}/Image ${DEPLOY_DIR_IMAGE}/Dubhe-80
- cp ${DEPLOY_DIR_IMAGE}/Image-initramfs-${MACHINE}.bin ${DEPLOY_DIR_IMAGE}/Dubhe-80
- cp ${DEPLOY_DIR_IMAGE}/${IMAGE_BASENAME}-${MACHINE}.tar.gz ${DEPLOY_DIR_IMAGE}/Dubhe-80/Image-nfs-${MACHINE}.tar.gz
- cp ${DEPLOY_DIR_IMAGE}/Image-sd-${MACHINE}.img ${DEPLOY_DIR_IMAGE}/Dubhe-80
- cp -r ${DEPLOY_DIR_IMAGE}/Dubhe-80 ${DEPLOY_DIR_IMAGE}/Dubhe-90
- cp ${DEPLOY_DIR_IMAGE}/dubhe80_fpga.dtb ${DEPLOY_DIR_IMAGE}/Dubhe-80/dubhe_fpga.dtb
- cp ${DEPLOY_DIR_IMAGE}/dubhe90_fpga.dtb ${DEPLOY_DIR_IMAGE}/Dubhe-90/dubhe_fpga.dtb
- }
- addtask do_create_output_folder before do_populate_lic_deploy after do_image_complete
|