MdeModulePkg.dec 125 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184
  1. ## @file MdeModulePkg.dec
  2. # This package provides the modules that conform to UEFI/PI Industry standards.
  3. # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
  4. # and libraries instances, which are used for those modules.
  5. #
  6. # Copyright (c) 2019, NVIDIA CORPORATION. All rights reserved.
  7. # Copyright (c) 2007 - 2021, Intel Corporation. All rights reserved.<BR>
  8. # Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
  9. # (C) Copyright 2016 - 2019 Hewlett Packard Enterprise Development LP<BR>
  10. # Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
  11. # Copyright (c) Microsoft Corporation.<BR>
  12. # SPDX-License-Identifier: BSD-2-Clause-Patent
  13. #
  14. ##
  15. [Defines]
  16. DEC_SPECIFICATION = 0x00010005
  17. PACKAGE_NAME = MdeModulePkg
  18. PACKAGE_UNI_FILE = MdeModulePkg.uni
  19. PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  20. PACKAGE_VERSION = 0.98
  21. [Includes]
  22. Include
  23. [Includes.Common.Private]
  24. Library/BrotliCustomDecompressLib/brotli/c/include
  25. [LibraryClasses]
  26. ## @libraryclass Defines a set of methods to reset whole system.
  27. ResetSystemLib|Include/Library/ResetSystemLib.h
  28. ## @libraryclass Business logic for storing and testing variable policies
  29. VariablePolicyLib|Include/Library/VariablePolicyLib.h
  30. ## @libraryclass Defines a set of helper functions for resetting the system.
  31. ResetUtilityLib|Include/Library/ResetUtilityLib.h
  32. ## @libraryclass Provides HII related functions.
  33. HiiLib|Include/Library/HiiLib.h
  34. ## @libraryclass Defines a set of interfaces on how to process capusle image update.
  35. CapsuleLib|Include/Library/CapsuleLib.h
  36. ## @libraryclass Provides global variables that are pointers
  37. # to the UEFI HII related protocols.
  38. #
  39. UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
  40. ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
  41. #
  42. SecurityManagementLib|Include/Library/SecurityManagementLib.h
  43. ## @libraryclass OEM status code libary is used to report status code to OEM device.
  44. #
  45. OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
  46. ## @libraryclass Debug Agent is used to provide soft debug capability.
  47. #
  48. DebugAgentLib|Include/Library/DebugAgentLib.h
  49. ## @libraryclass Provide platform specific hooks.
  50. #
  51. PlatformHookLib|Include/Library/PlatformHookLib.h
  52. ## @libraryclass Provide platform specific hooks for SMM core.
  53. #
  54. SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
  55. ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
  56. #
  57. LockBoxLib|Include/Library/LockBoxLib.h
  58. ## @libraryclass Provide the CPU exception handler.
  59. #
  60. CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
  61. ## @libraryclass Provides platform specific display interface.
  62. #
  63. CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
  64. ## @libraryclass Provides sorting functions
  65. SortLib|Include/Library/SortLib.h
  66. ## @libraryclass Provides core boot manager functions
  67. UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
  68. ## @libraryclass Provides core boot manager functions
  69. PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
  70. ## @libraryclass Provides common interfaces about TPM measurement for other modules.
  71. #
  72. TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
  73. ## @libraryclass Provides authenticated variable services.
  74. #
  75. AuthVariableLib|Include/Library/AuthVariableLib.h
  76. ## @libraryclass Provides variable check services and database management.
  77. #
  78. VarCheckLib|Include/Library/VarCheckLib.h
  79. ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.
  80. #
  81. PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
  82. ## @libraryclass Provides services to get do the file explorer.
  83. #
  84. FileExplorerLib|Include/Library/FileExplorerLib.h
  85. ## @libraryclass Provides interfaces about logo display.
  86. #
  87. BootLogoLib|Include/Library/BootLogoLib.h
  88. ## @libraryclass Provides interfaces about Ipmi submit generic commond.
  89. #
  90. IpmiLib|Include/Library/IpmiLib.h
  91. ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
  92. #
  93. PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
  94. ## @libraryclass Provides services to record memory profile of multilevel caller.
  95. #
  96. MemoryProfileLib|Include/Library/MemoryProfileLib.h
  97. ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.
  98. ##
  99. FrameBufferBltLib|Include/Library/FrameBufferBltLib.h
  100. ## @libraryclass Provides services to authenticate a UEFI defined FMP Capsule.
  101. #
  102. FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h
  103. ## @libraryclass Provides a service to register non-discoverable device
  104. ##
  105. NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h
  106. ## @libraryclass Provides services to convert a BMP graphics image to a GOP BLT buffer
  107. # and to convert a GOP BLT buffer to a BMP graphics image.
  108. #
  109. BmpSupportLib|Include/Library/BmpSupportLib.h
  110. ## @libraryclass Provides services to display completion progress when
  111. # processing a firmware update that updates the firmware image in a firmware
  112. # device. A platform may provide its own instance of this library class to
  113. # customize how a user is informed of completion progress.
  114. #
  115. DisplayUpdateProgressLib|Include/Library/DisplayUpdateProgressLib.h
  116. ## @libraryclass This library contains helper functions for marshalling and
  117. # registering new policies with the VariablePolicy infrastructure.
  118. #
  119. VariablePolicyHelperLib|Include/Library/VariablePolicyHelperLib.h
  120. ## @libraryclass Provides services to access UEFI variable flash information.
  121. #
  122. VariableFlashInfoLib|Include/Library/VariableFlashInfoLib.h
  123. [Guids]
  124. ## MdeModule package token space guid
  125. # Include/Guid/MdeModulePkgTokenSpace.h
  126. gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
  127. ## Hob guid for Pcd DataBase
  128. # Include/Guid/PcdDataBaseHobGuid.h
  129. gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
  130. ## Guid for PCD DataBase signature.
  131. # Include/Guid/PcdDataBaseSignatureGuid.h
  132. gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
  133. ## Guid for EDKII implementation GUIDed opcodes
  134. # Include/Guid/MdeModuleHii.h
  135. gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
  136. ## Guid for EDKII implementation extension, used to indaicate there are bit fields in the varstore.
  137. # Include/Guid/MdeModuleHii.h
  138. gEdkiiIfrBitVarstoreGuid = {0x82DDD68B, 0x9163, 0x4187, {0x9B, 0x27, 0x20, 0xA8, 0xFD, 0x60,0xA7, 0x1D}}
  139. ## Guid for Framework vfr GUIDed opcodes.
  140. # Include/Guid/MdeModuleHii.h
  141. gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
  142. ## Guid to specify the System Non Volatile FV
  143. # Include/Guid/SystemNvDataGuid.h
  144. gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
  145. ## GUID used as the signature of FTW working block header.
  146. # Include/Guid/SystemNvDataGuid.h
  147. gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
  148. ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
  149. # Include/Guid/FaultTolerantWrite.h
  150. gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
  151. ## Guid specify the device is the console out device.
  152. # Include/Guid/ConsoleOutDevice.h
  153. gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
  154. ## Guid specify the device is the console in device.
  155. # Include/Guid/ConsoleInDevice.h
  156. gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
  157. ## Hob and Variable guid specify the platform memory type information.
  158. # Include/Guid/MemoryTypeInformation.h
  159. gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
  160. ## Capsule update hob and variable guid
  161. # Include/Guid/CapsuleVendor.h
  162. gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
  163. ## Guid specifiy the device is the StdErr device.
  164. # Include/Guid/StandardErrorDevice.h
  165. gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
  166. ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
  167. # Include/Guid/VariableFormat.h
  168. gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
  169. ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
  170. # Include/Guid/AuthenticatedVariableFormat.h
  171. gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
  172. # Include/Guid/VariableIndexTable.h
  173. gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
  174. ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
  175. # Include/Guid/SmmVariableCommon.h
  176. gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
  177. ## Guid of the variable flash information HOB.
  178. # Include/Guid/VariableFlashInfo.h
  179. gVariableFlashInfoHobGuid = { 0x5d11c653, 0x8154, 0x4ac3, { 0xa8, 0xc2, 0xfb, 0xa2, 0x89, 0x20, 0xfc, 0x90 }}
  180. ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
  181. # Include/Guid/Performance.h
  182. gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
  183. gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
  184. gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
  185. gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
  186. # Include/Guid/PerformanceMeasurement.h
  187. gEdkiiPerformanceMeasurementProtocolGuid = { 0xc85d06be, 0x5f75, 0x48ce, { 0xa8, 0x0f, 0x12, 0x36, 0xba, 0x3b, 0x87, 0xb1 } }
  188. gEdkiiSmmPerformanceMeasurementProtocolGuid = { 0xd56b6d73, 0x1a7b, 0x4015, { 0x9b, 0xb4, 0x7b, 0x07, 0x17, 0x29, 0xed, 0x24 } }
  189. ## Guid is defined for CRC32 encapsulation scheme.
  190. # Include/Guid/Crc32GuidedSectionExtraction.h
  191. gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
  192. ## Include/Guid/StatusCodeCallbackGuid.h
  193. gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
  194. ## GUID identifies status code records HOB that originate from the PEI status code
  195. # Include/Guid/MemoryStatusCodeRecord.h
  196. gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
  197. ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
  198. # Include/Guid/StatusCodeDataTypeDebug.h
  199. gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
  200. ## A configuration Table Guid for Load module at fixed address
  201. # Include/Guid/LoadModuleAtFixedAddress.h
  202. gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
  203. ## GUID used to store the global debug mask value into an EFI Variable
  204. # Include/Guid/DebugMask.h
  205. gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
  206. ## Event for the DXE Core to signal idle events
  207. # Include/Guid/EventIdle.h
  208. gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
  209. ## Include/Guid/RecoveryDevice.h
  210. gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
  211. ## Include/Guid/RecoveryDevice.h
  212. gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
  213. ## Include/Guid/RecoveryDevice.h
  214. gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
  215. ## Include/Guid/RecoveryDevice.h
  216. gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
  217. ## Include/Guid/RecoveryDevice.h
  218. gRecoveryOnFatNvmeDiskGuid = { 0xC770A27F, 0x956A, 0x497A, { 0x85, 0x48, 0xE0, 0x61, 0x97, 0x58, 0x8B, 0xF6 }}
  219. ## Include/Guid/SmmLockBox.h
  220. gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
  221. ## Include/Guid/AcpiS3Context.h
  222. gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
  223. ## Include/Guid/AcpiS3Context.h
  224. gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
  225. ## Include/Guid/BootScriptExecutorVariable.h
  226. gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
  227. gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
  228. ## Include/Guid/UsbKeyBoardLayout.h
  229. gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
  230. gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
  231. ## Include/Guid/HiiResourceSampleHii.h
  232. gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
  233. ## Include/Guid/DriverSampleHii.h
  234. gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
  235. gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
  236. gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
  237. ## Include/Guid/PlatDriOverrideHii.h
  238. gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
  239. ## Include/Guid/ZeroGuid.h
  240. gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
  241. ## Include/Guid/MtcVendor.h
  242. gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
  243. ## Guid for Firmware Performance Data Table (FPDT) implementation.
  244. # Include/Guid/FirmwarePerformance.h
  245. gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
  246. gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
  247. ## Include/Guid/ExitBootServiceFailed.h
  248. gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
  249. ## Include/Guid/ConnectConInEvent.h
  250. gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
  251. ## Include/Guid/StatusCodeDataTypeVariable.h
  252. gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
  253. ## Include/Guid/MemoryProfile.h
  254. gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
  255. gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}
  256. ## Include/Protocol/VarErrorFlag.h
  257. gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
  258. ## GUID indicates the BROTLI custom compress/decompress algorithm.
  259. gBrotliCustomDecompressGuid = { 0x3D532050, 0x5CDA, 0x4FD0, { 0x87, 0x9E, 0x0F, 0x7F, 0x63, 0x0D, 0x5A, 0xFB }}
  260. ## GUID indicates the LZMA custom compress/decompress algorithm.
  261. # Include/Guid/LzmaDecompress.h
  262. gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
  263. gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
  264. ## Include/Guid/TtyTerm.h
  265. gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
  266. gEdkiiLinuxTermGuid = { 0xe4364a7f, 0xf825, 0x430e, {0x9d, 0x3a, 0x9c, 0x9b, 0xe6, 0x81, 0x7c, 0xa5 }}
  267. gEdkiiXtermR6Guid = { 0xfbfca56b, 0xbb36, 0x4b78, {0xaa, 0xab, 0xbe, 0x1b, 0x97, 0xec, 0x7c, 0xcb }}
  268. gEdkiiVT400Guid = { 0x8e46dddd, 0x3d49, 0x4a9d, {0xb8, 0x75, 0x3c, 0x08, 0x6f, 0x6a, 0xa2, 0xbd }}
  269. gEdkiiSCOTermGuid = { 0xfc7dd6e0, 0x813c, 0x434d, {0xb4, 0xda, 0x3b, 0xd6, 0x49, 0xe9, 0xe1, 0x5a }}
  270. ## Include/Guid/HiiBootMaintenanceFormset.h
  271. gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
  272. gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
  273. ## Include/Guid/RamDiskHii.h
  274. gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
  275. ## Include/Guid/PiSmmCommunicationRegionTable.h
  276. gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}
  277. ## Include/Guid/PiSmmMemoryAttributesTable.h
  278. gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}
  279. ## Include/Guid/SmiHandlerProfile.h
  280. gSmiHandlerProfileGuid = {0x49174342, 0x7108, 0x409b, {0x8b, 0xbe, 0x65, 0xfd, 0xa8, 0x53, 0x89, 0xf5}}
  281. ## Include/Guid/NonDiscoverableDevice.h
  282. gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }
  283. gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }
  284. gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }
  285. gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }
  286. gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }
  287. gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }
  288. gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }
  289. gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }
  290. gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }
  291. ## Include/Guid/PlatformHasAcpi.h
  292. gEdkiiPlatformHasAcpiGuid = { 0xf0966b41, 0xc23f, 0x41b9, { 0x96, 0x04, 0x0f, 0xf7, 0xe1, 0x11, 0x96, 0x5a } }
  293. ## Include/Guid/ExtendedFirmwarePerformance.h
  294. gEdkiiFpdtExtendedFirmwarePerformanceGuid = { 0x3b387bfd, 0x7abc, 0x4cf2, { 0xa0, 0xca, 0xb6, 0xa1, 0x6c, 0x1b, 0x1b, 0x25 } }
  295. ## Include/Guid/EndofS3Resume.h
  296. gEdkiiEndOfS3ResumeGuid = { 0x96f5296d, 0x05f7, 0x4f3c, {0x84, 0x67, 0xe4, 0x56, 0x89, 0x0e, 0x0c, 0xb5 } }
  297. ## Used (similar to Variable Services) to communicate policies to the enforcement engine.
  298. # {DA1B0D11-D1A7-46C4-9DC9-F3714875C6EB}
  299. gVarCheckPolicyLibMmiHandlerGuid = { 0xda1b0d11, 0xd1a7, 0x46c4, { 0x9d, 0xc9, 0xf3, 0x71, 0x48, 0x75, 0xc6, 0xeb }}
  300. ## Include/Guid/S3SmmInitDone.h
  301. gEdkiiS3SmmInitDoneGuid = { 0x8f9d4825, 0x797d, 0x48fc, { 0x84, 0x71, 0x84, 0x50, 0x25, 0x79, 0x2e, 0xf6 } }
  302. ## Include/Guid/S3StorageDeviceInitList.h
  303. gS3StorageDeviceInitListGuid = { 0x310e9b8c, 0xcf90, 0x421e, { 0x8e, 0x9b, 0x9e, 0xef, 0xb6, 0x17, 0xc8, 0xef } }
  304. ## Include/Guid/SerialPortLibVendor.h
  305. gEdkiiSerialPortLibVendorGuid = { 0xD3987D4B, 0x971A, 0x435F, { 0x8C, 0xAF, 0x49, 0x67, 0xEB, 0x62, 0x72, 0x41 } }
  306. ## GUID indicates the capsule is to store Capsule On Disk file names.
  307. gEdkiiCapsuleOnDiskNameGuid = { 0x98c80a4f, 0xe16b, 0x4d11, { 0x93, 0x9a, 0xab, 0xe5, 0x61, 0x26, 0x3, 0x30 } }
  308. ## Include/Guid/MigratedFvInfo.h
  309. gEdkiiMigratedFvInfoGuid = { 0xc1ab12f7, 0x74aa, 0x408d, { 0xa2, 0xf4, 0xc6, 0xce, 0xfd, 0x17, 0x98, 0x71 } }
  310. #
  311. # GUID defined in UniversalPayload
  312. #
  313. ## Include/UniversalPayload/PciRootBridges.h
  314. gUniversalPayloadPciRootBridgeInfoGuid = { 0xec4ebacb, 0x2638, 0x416e, { 0xbe, 0x80, 0xe5, 0xfa, 0x4b, 0x51, 0x19, 0x01 }}
  315. ## Include/UniversalPayload/SmbiosTable.h
  316. gUniversalPayloadSmbios3TableGuid = { 0x92b7896c, 0x3362, 0x46ce, { 0x99, 0xb3, 0x4f, 0x5e, 0x3c, 0x34, 0xeb, 0x42 } }
  317. ## Include/UniversalPayload/SmbiosTable.h
  318. gUniversalPayloadSmbiosTableGuid = { 0x590a0d26, 0x06e5, 0x4d20, { 0x8a, 0x82, 0x59, 0xea, 0x1b, 0x34, 0x98, 0x2d } }
  319. ## Include/UniversalPayload/AcpiTable.h
  320. gUniversalPayloadAcpiTableGuid = { 0x9f9a9506, 0x5597, 0x4515, { 0xba, 0xb6, 0x8b, 0xcd, 0xe7, 0x84, 0xba, 0x87 } }
  321. ## Include/UniversalPayload/ExtraData.h
  322. gUniversalPayloadExtraDataGuid = {0x15a5baf6, 0x1c91, 0x467d, {0x9d, 0xfb, 0x31, 0x9d, 0x17, 0x8d, 0x4b, 0xb4}}
  323. ## Include/UniversalPayload/SerialPortInfo.h
  324. gUniversalPayloadSerialPortInfoGuid = { 0xaa7e190d, 0xbe21, 0x4409, { 0x8e, 0x67, 0xa2, 0xcd, 0xf, 0x61, 0xe1, 0x70 } }
  325. ## GUID used for Boot Discovery Policy FormSet guid and related variables.
  326. gBootDiscoveryPolicyMgrFormsetGuid = { 0x5b6f7107, 0xbb3c, 0x4660, { 0x92, 0xcd, 0x54, 0x26, 0x90, 0x28, 0x0b, 0xbd } }
  327. [Ppis]
  328. ## Include/Ppi/AtaController.h
  329. gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
  330. ## Include/Ppi/UsbHostController.h
  331. gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
  332. ## Include/Ppi/Usb2HostController.h
  333. gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
  334. ## Include/Ppi/UsbController.h
  335. gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
  336. ## Include/Ppi/UsbIo.h
  337. gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
  338. ## Include/Ppi/SecPerformance.h
  339. gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
  340. ## Include/Ppi/SmmCommunication.h
  341. gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
  342. ## Include/Ppi/SmmAccess.h
  343. gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
  344. ## Include/Ppi/SmmControl.h
  345. gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
  346. ## Include/Ppi/PostBootScriptTable.h
  347. gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
  348. ## Include/Ppi/SerialPortPei.h
  349. gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
  350. ## Include/Ppi/UfsHostController.h
  351. gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
  352. ## Include/Ppi/IpmiPpi.h
  353. gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
  354. ## Include/Ppi/SdMmcHostController.h
  355. gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
  356. ## Include/Ppi/IoMmu.h
  357. gEdkiiIoMmuPpiGuid = { 0x70b0af26, 0xf847, 0x4bb6, { 0xaa, 0xb9, 0xcd, 0xe8, 0x4f, 0xc6, 0x14, 0x31 } }
  358. ## Include/Ppi/PlatformSpecificResetFilter.h
  359. gEdkiiPlatformSpecificResetFilterPpiGuid = { 0x8c9f4de3, 0x7b90, 0x47ef, { 0x93, 0x8, 0x28, 0x7c, 0xec, 0xd6, 0x6d, 0xe8 } }
  360. ## Include/Ppi/PlatformSpecificResetNotification.h
  361. gEdkiiPlatformSpecificResetNotificationPpiGuid = { 0xe09f355d, 0xdae8, 0x4910, { 0xb1, 0x4a, 0x92, 0x78, 0xf, 0xdc, 0xf7, 0xcb } }
  362. ## Include/Ppi/PlatformSpecificResetHandler.h
  363. gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc, { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
  364. ## Include/Ppi/NvmExpressHostController.h
  365. gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
  366. ## Include/Ppi/AtaAhciController.h
  367. gEdkiiPeiAtaAhciHostControllerPpiGuid = { 0x61dd33ea, 0x421f, 0x4cc0, { 0x89, 0x29, 0xff, 0xee, 0xa9, 0xa1, 0xa2, 0x61 } }
  368. ## Include/Ppi/StorageSecurityCommand.h
  369. gEdkiiPeiStorageSecurityCommandPpiGuid = { 0x35de0b4e, 0x30fb, 0x46c3, { 0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 0x56 } }
  370. ## Include/Ppi/AtaPassThru.h
  371. gEdkiiPeiAtaPassThruPpiGuid = { 0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9 } }
  372. ## Include/Ppi/Debug.h
  373. gEdkiiDebugPpiGuid = { 0x999e699c, 0xb013, 0x475e, { 0xb1, 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
  374. ## Include/Ppi/NvmExpressPassThru.h
  375. gEdkiiPeiNvmExpressPassThruPpiGuid = { 0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } }
  376. ## Include/Ppi/PciDevice.h
  377. gEdkiiPeiPciDevicePpiGuid = { 0x1597ab4f, 0xd542, 0x4efe, { 0x9a, 0xf7, 0xb2, 0x44, 0xec, 0x54, 0x4c, 0x0b } }
  378. ## Include/Ppi/CapsuleOnDisk.h
  379. gEdkiiPeiCapsuleOnDiskPpiGuid = { 0x71a9ea61, 0x5a35, 0x4a5d, { 0xac, 0xef, 0x9c, 0xf8, 0x6d, 0x6d, 0x67, 0xe0 } }
  380. gEdkiiPeiBootInCapsuleOnDiskModePpiGuid = { 0xb08a11e4, 0xe2b7, 0x4b75, { 0xb5, 0x15, 0xaf, 0x61, 0x6, 0x68, 0xbf, 0xd1 } }
  381. [Protocols]
  382. ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
  383. # Include/Protocol/LoadPe32Image.h
  384. # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
  385. # If developer need implement such functionality, they should use BasePeCoffLib.
  386. gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
  387. ## Print protocols define basic print functions to print the format unicode and ascii string.
  388. # Include/Protocol/Print2.h
  389. gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
  390. gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }
  391. ## This protocol defines the generic memory test interfaces in Dxe phase.
  392. # Include/Protocol/GenericMemoryTest.h
  393. gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
  394. ## This protocol defines the Debugger Configuration interface.
  395. # Include/Protocol/DebuggerConfiguration.h
  396. gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}
  397. ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
  398. # Include/Protocol/FaultTolerantWrite.h
  399. gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
  400. ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
  401. # Include/Protocol/SmmFaultTolerantWrite.h
  402. gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
  403. ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
  404. # Include/Protocol/SwapAddressRange.h
  405. gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
  406. ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
  407. # Include/Protocol/SmmSwapAddressRange.h
  408. gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
  409. ## This protocol is intended for use as a means to store data in the EFI SMM environment.
  410. # Include/Protocol/SmmVariableProtocol.h
  411. gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
  412. ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
  413. # Include/Protocol/VariableLock.h
  414. gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
  415. ## Include/Protocol/VarCheck.h
  416. gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
  417. ## Include/Protocol/SmmVarCheck.h
  418. gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
  419. ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
  420. # Include/Protocol/SmmFirmwareVolumeBlock.h
  421. gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
  422. ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
  423. # Include/Guid/DebugMask.h
  424. gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
  425. ## Include/Protocol/LockBox.h
  426. gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
  427. ## Include/Protocol/FormBrowserEx.h
  428. gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
  429. ## Include/Protocol/EbcVmTest.h
  430. gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
  431. ## Include/Protocol/EbcSimpleDebugger.h
  432. gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
  433. ## Include/Protocol/BootLogo.h
  434. gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
  435. # Include/Protocol/BootLogo2.h
  436. gEdkiiBootLogo2ProtocolGuid = { 0x4b5dc1df, 0x1eaa, 0x48b2, { 0xa7, 0xe9, 0xea, 0xc4, 0x89, 0xa0, 0xb, 0x5c } }
  437. ## Include/Protocol/DisplayProtocol.h
  438. gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
  439. ## Include/Protocol/FormBrowserEx2.h
  440. gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
  441. ## Include/Protocol/UfsHostController.h
  442. gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
  443. ## Include/Protocol/UfsHostControllerPlatform.h
  444. gEdkiiUfsHcPlatformProtocolGuid = { 0x3d18ba13, 0xd9b1, 0x4dd4, {0xb9, 0x16, 0xd3, 0x07, 0x96, 0x53, 0x9e, 0xd8}}
  445. ## Include/Protocol/EsrtManagement.h
  446. gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
  447. ## Include/Protocol/SmmExitBootServices.h
  448. gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
  449. ## Include/Protocol/SmmLegacyBoot.h
  450. gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
  451. ## Include/Protocol/SmmReadyToBoot.h
  452. gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
  453. ## Include/Protocol/PlatformLogo.h
  454. gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }
  455. ## Include/Protocol/FileExplorer.h
  456. gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
  457. ## Include/Protocol/IpmiProtocol.h
  458. gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
  459. gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
  460. ## PS/2 policy protocol abstracts the specific platform initialization and setting.
  461. # Include/Protocol/Ps2Policy.h
  462. gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }
  463. ## Include/Protocol/NonDiscoverableDevice.h
  464. gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }
  465. ## Include/Protocol/IoMmu.h
  466. gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }
  467. ## Include/Protocol/DeviceSecurity.h
  468. gEdkiiDeviceSecurityProtocolGuid = { 0x5d6b38c8, 0x5510, 0x4458, { 0xb4, 0x8d, 0x95, 0x81, 0xcf, 0xa7, 0xb0, 0xd } }
  469. gEdkiiDeviceIdentifierTypePciGuid = { 0x2509b2f1, 0xa022, 0x4cca, { 0xaf, 0x70, 0xf9, 0xd3, 0x21, 0xfb, 0x66, 0x49 } }
  470. gEdkiiDeviceIdentifierTypeUsbGuid = { 0x7394f350, 0x394d, 0x488c, { 0xbb, 0x75, 0xc, 0xab, 0x7b, 0x12, 0xa, 0xc5 } }
  471. ## Include/Protocol/SmmMemoryAttribute.h
  472. gEdkiiSmmMemoryAttributeProtocolGuid = { 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } }
  473. ## Include/Protocol/SdMmcOverride.h
  474. gEdkiiSdMmcOverrideProtocolGuid = { 0xeaf9e3c1, 0xc9cd, 0x46db, { 0xa5, 0xe5, 0x5a, 0x12, 0x4c, 0x83, 0x23, 0x23 } }
  475. ## Include/Protocol/PlatformSpecificResetFilter.h
  476. gEdkiiPlatformSpecificResetFilterProtocolGuid = { 0x695d7835, 0x8d47, 0x4c11, { 0xab, 0x22, 0xfa, 0x8a, 0xcc, 0xe7, 0xae, 0x7a } }
  477. ## Include/Protocol/PlatformSpecificResetHandler.h
  478. gEdkiiPlatformSpecificResetHandlerProtocolGuid = { 0x2df6ba0b, 0x7092, 0x440d, { 0xbd, 0x4, 0xfb, 0x9, 0x1e, 0xc3, 0xf3, 0xc1 } }
  479. ## Include/Protocol/FirmwareManagementProgress.h
  480. gEdkiiFirmwareManagementProgressProtocolGuid = { 0x1849bda2, 0x6952, 0x4e86, { 0xa1, 0xdb, 0x55, 0x9a, 0x3c, 0x47, 0x9d, 0xf1 } }
  481. ## Include/Protocol/AtaAtapiPolicy.h
  482. gEdkiiAtaAtapiPolicyProtocolGuid = { 0xe59cd769, 0x5083, 0x4f26,{ 0x90, 0x94, 0x6c, 0x91, 0x9f, 0x91, 0x6c, 0x4e } }
  483. ## Include/Protocol/PeCoffImageEmulator.h
  484. gEdkiiPeCoffImageEmulatorProtocolGuid = { 0x96f46153, 0x97a7, 0x4793, { 0xac, 0xc1, 0xfa, 0x19, 0xbf, 0x78, 0xea, 0x97 } }
  485. ## Include/Protocol/PlatformBootManager.h
  486. gEdkiiPlatformBootManagerProtocolGuid = { 0xaa17add4, 0x756c, 0x460d, { 0x94, 0xb8, 0x43, 0x88, 0xd7, 0xfb, 0x3e, 0x59 } }
  487. #
  488. # [Error.gEfiMdeModulePkgTokenSpaceGuid]
  489. # 0x80000001 | Invalid value provided.
  490. # 0x80000002 | Reserved bits must be set to zero.
  491. # 0x80000003 | Incorrect progress code provided.
  492. # 0x80000004 | Invalid foreground color specified.
  493. # 0x80000005 | Invalid background color specified.
  494. # 0x80000006 | Incorrect error code provided.
  495. #
  496. ## Include/Protocol/VariablePolicy.h
  497. gEdkiiVariablePolicyProtocolGuid = { 0x81D1675C, 0x86F6, 0x48DF, { 0xBD, 0x95, 0x9A, 0x6E, 0x4F, 0x09, 0x25, 0xC3 } }
  498. [PcdsFeatureFlag]
  499. ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
  500. # TRUE - Supports update capsule across a system reset.<BR>
  501. # FALSE - Does not support update capsule across a system reset.<BR>
  502. # @Prompt Enable update capsule across a system reset.
  503. gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
  504. ## Indicates if all PCD PPI services will be enabled.<BR><BR>
  505. # TRUE - All PCD PPI services will be produced.<BR>
  506. # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
  507. # @Prompt Enable full PEI PCD services.
  508. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
  509. ## Indicates if the Device Path To Text Protocol should be produced by the platform.
  510. # It can be disabled to save size.<BR><BR>
  511. # TRUE - Device Path To Text Protocol will be produced.<BR>
  512. # FALSE - Device Path To Text Protocol will not be produced.<BR>
  513. # @Prompt Enable Device Path to Text support.
  514. gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
  515. ## Indicates if the Device Path From Text Protocol should be produced by the platform.
  516. # It can be disabled to save size.<BR><BR>
  517. # TRUE - Device Path From Text Protocol will be produced.<BR>
  518. # FALSE - Device Path From Text Protocol will not be produced.<BR>
  519. # @Prompt Enable Device Path From Text support.
  520. gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
  521. ## Indicates if the UEFI variable runtime cache should be enabled.
  522. # This setting only applies if SMM variables are enabled. When enabled, all variable
  523. # data for Runtime Service GetVariable () and GetNextVariableName () calls is retrieved
  524. # from a runtime data buffer referred to as the "runtime cache". An SMI is not triggered
  525. # at all for these requests. Variables writes still trigger an SMI. This can greatly
  526. # reduce overall system SMM usage as most boots tend to issue far more variable reads
  527. # than writes.<BR><BR>
  528. # TRUE - The UEFI variable runtime cache is enabled.<BR>
  529. # FALSE - The UEFI variable runtime cache is disabled.<BR>
  530. # @Prompt Enable the UEFI variable runtime cache.
  531. gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache|TRUE|BOOLEAN|0x00010039
  532. ## Indicates if the statistics about variable usage will be collected. This information is
  533. # stored as a vendor configuration table into the EFI system table.
  534. # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
  535. # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
  536. # TRUE - Statistics about variable usage will be collected.<BR>
  537. # FALSE - Statistics about variable usage will not be collected.<BR>
  538. # @Prompt Enable variable statistics collection.
  539. gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
  540. ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
  541. # TRUE - Installs Unicode Collation Protocol.<BR>
  542. # FALSE - Does not install Unicode Collation Protocol.<BR>
  543. # @Prompt Enable Unicode Collation support.
  544. gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
  545. ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
  546. # TRUE - Installs Unicode Collation 2 Protocol.<BR>
  547. # FALSE - Does not install Unicode Collation 2 Protocol.<BR>
  548. # @Prompt Enable Unicode Collation 2 support.
  549. gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
  550. ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
  551. # It could be set FALSE to save size.<BR><BR>
  552. # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
  553. # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
  554. # @Prompt Enable ConOut GOP support.
  555. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
  556. ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
  557. # It could be set FALSE to save size.<BR><BR>
  558. # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
  559. # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
  560. # @Prompt Enable ConOut UGA support.
  561. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
  562. ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
  563. # This PCD is used to tune PEI phase performance to reduce the search image time.
  564. # It can be set according to the generated image section type.<BR><BR>
  565. # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
  566. # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
  567. # @Prompt PeiCore search TE section first.
  568. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
  569. ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
  570. # interrupt to access usb device in the case of absence of usb stack.
  571. # DUET platform requires the token to be TRUE.<BR><BR>
  572. # TRUE - Turn off usb legacy support.<BR>
  573. # FALSE - Does not turn off usb legacy support.<BR>
  574. # @Prompt Turn off USB legacy support.
  575. gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
  576. ## Indicates if HiiImageProtocol will be installed.
  577. # FALSE is for size reduction.<BR><BR>
  578. # TRUE - Installs HiiImageProtocol.<BR>
  579. # FALSE - Does not install HiiImageProtocol.<BR>
  580. # @Prompt Enable HII image support.
  581. gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
  582. ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
  583. # The default keyboard layout serves as the backup when no keyboard layout can be retrieved
  584. # from HII database.<BR><BR>
  585. # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>
  586. # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
  587. # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
  588. gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
  589. ## Indicates if HelloWorld Application will print the verbose information.
  590. # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
  591. # TRUE - HelloWorld Application will print the verbose information.<BR>
  592. # FALSE - HelloWorld Application will not print the verbose information.<BR>
  593. # @Prompt Enable HelloWorld print.
  594. gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
  595. ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
  596. # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>
  597. # FALSE - Only FTW Write service is available.<BR>
  598. # @Prompt Enable FULL FTW services.
  599. gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
  600. ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
  601. # TRUE - DXE IPL will support UEFI decompression.<BR>
  602. # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
  603. # @Prompt Enable UEFI decompression support in DXE IPL.
  604. gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
  605. ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
  606. # TRUE - PciBus driver supports the hot plug device.<BR>
  607. # FALSE - PciBus driver doesn't support the hot plug device.<BR>
  608. # @Prompt Enable PciBus hot plug device support.
  609. gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
  610. ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
  611. # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
  612. # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
  613. # @Prompt Enable PCI bridge IO alignment probe.
  614. gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
  615. ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
  616. # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>
  617. # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
  618. # @Prompt Enable PEI StatusCode replay in DXE phase
  619. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
  620. ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
  621. # TRUE - Installs ACPI SDT protocol.<BR>
  622. # FALSE - Does not install ACPI SDT protocol.<BR>
  623. # @Prompt Enable ACPI SDT support.
  624. gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
  625. ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
  626. # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
  627. # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
  628. # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
  629. # @Prompt Enable unaligned PCI I/O support.
  630. gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
  631. ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
  632. # TRUE - TEXT statement will always be set to GrayOut.<BR>
  633. # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
  634. # @Prompt Always GrayOut TEXT statement.
  635. gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
  636. ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
  637. # TRUE - The unselectable menu will be set to GrayOut.<BR>
  638. # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
  639. # @Prompt GrayOut read only menu.
  640. gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
  641. ## Indicates if recovery from IDE disk will be supported.<BR><BR>
  642. # TRUE - Supports recovery from IDE disk.<BR>
  643. # FALSE - Does not support recovery from IDE disk.<BR>
  644. # @Prompt Enable recovery on IDE disk.
  645. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
  646. ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
  647. # TRUE - Supports recovery from FAT floppy disk.<BR>
  648. # FALSE - Does not support recovery from FAT floppy disk.<BR>
  649. # @Prompt Enable recovery on FAT floppy disk.
  650. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
  651. ## Indicates if recovery from data CD will be supported.<BR><BR>
  652. # TRUE - Supports recovery from data CD.<BR>
  653. # FALSE - Does not support recovery from data CD.<BR>
  654. # @Prompt Enable recovery on data CD.
  655. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
  656. ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
  657. # TRUE - Supports recovery from USB disk.<BR>
  658. # FALSE - Does not support recovery from USB disk.<BR>
  659. # @Prompt Enable recovery on FAT USB disk.
  660. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
  661. ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
  662. # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>
  663. # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
  664. # @Prompt Enable S3 performance data support.
  665. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
  666. ## Indicates if PS2 keyboard does a extended verification during start.
  667. # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
  668. # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
  669. # TRUE - Turn on PS2 keyboard extended verification.<BR>
  670. # FALSE - Turn off PS2 keyboard extended verification.<BR>
  671. # @Prompt Turn on PS2 Keyboard Extended Verification
  672. gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072
  673. ## Indicates if Serial device uses half hand shake.<BR><BR>
  674. # TRUE - Serial device uses half hand shake.<BR>
  675. # FALSE - Serial device doesn't use half hand shake.<BR>
  676. # @Prompt Enable Serial device Half Hand Shake
  677. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
  678. ## Indicates if HII data and configuration has been exported.<BR><BR>
  679. # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
  680. # simulator platform because the performance cost for this feature.
  681. # TRUE - Export HII data and configuration data.<BR>
  682. # FALSE - Does not export HII data and configuration.<BR>
  683. # @Prompt Enable export HII data and configuration to be used in OS runtime.
  684. gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
  685. ## Indicates if PS2 mouse does a extended verification during start.
  686. # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
  687. # TRUE - Turn on PS2 mouse extended verification. <BR>
  688. # FALSE - Turn off PS2 mouse extended verification. <BR>
  689. # @Prompt Turn on PS2 Mouse Extended Verification
  690. gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075
  691. ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM
  692. # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),
  693. # which requires that all PCI MMIO BARs are located below 4 GB
  694. # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM
  695. # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM
  696. # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs
  697. gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a
  698. ## Indicates if the platform can support process non-reset capsule image at runtime.<BR><BR>
  699. # TRUE - Supports process non-reset capsule image at runtime.<BR>
  700. # FALSE - Does not support process non-reset capsule image at runtime.<BR>
  701. # @Prompt Enable process non-reset capsule image at runtime.
  702. gEfiMdeModulePkgTokenSpaceGuid.PcdSupportProcessCapsuleAtRuntime|FALSE|BOOLEAN|0x00010079
  703. [PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64, PcdsFeatureFlag.LOONGARCH64]
  704. gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a
  705. [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
  706. ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
  707. # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
  708. # is built in firmware.<BR><BR>
  709. # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
  710. # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
  711. # @Prompt DxeIpl switch to long mode.
  712. gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
  713. ## Indicates if DxeIpl should rebuild page tables. This flag only
  714. # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
  715. # TRUE - DxeIpl will rebuild page tables.<BR>
  716. # FALSE - DxeIpl will not rebuild page tables.<BR>
  717. # @Prompt DxeIpl rebuild page tables.
  718. gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
  719. [PcdsFixedAtBuild]
  720. ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
  721. # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
  722. # 0: Disable the feature.<BR>
  723. # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
  724. # @Prompt Enable LMFA feature.
  725. # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
  726. gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
  727. ## Progress Code for OS Loader LoadImage start.<BR><BR>
  728. # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
  729. # @Prompt Progress Code for OS Loader LoadImage start.
  730. # @ValidList 0x80000003 | 0x03058000
  731. gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
  732. ## Progress Code for OS Loader StartImage start.<BR><BR>
  733. # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
  734. # @Prompt Progress Code for OS Loader StartImage start.
  735. # @ValidList 0x80000003 | 0x03058001
  736. gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
  737. ## Progress Code for S3 Suspend start.<BR><BR>
  738. # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>
  739. # @Prompt Progress Code for S3 Suspend start.
  740. # @ValidList 0x80000003 | 0x03078000
  741. gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
  742. ## Progress Code for S3 Suspend end.<BR><BR>
  743. # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>
  744. # @Prompt Progress Code for S3 Suspend end.
  745. # @ValidList 0x80000003 | 0x03078001
  746. gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
  747. ## Error Code for SetVariable failure.<BR><BR>
  748. # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
  749. # @Prompt Error Code for SetVariable failure.
  750. # @ValidList 0x80000006 | 0x03058002
  751. gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
  752. ## Mask to control the NULL address detection in code for different phases.
  753. # If enabled, accessing NULL address in UEFI or SMM code can be caught.<BR><BR>
  754. # BIT0 - Enable NULL pointer detection for UEFI.<BR>
  755. # BIT1 - Enable NULL pointer detection for SMM.<BR>
  756. # BIT2..5 - Reserved for future uses.<BR>
  757. # BIT6 - Enable non-stop mode.<BR>
  758. # BIT7 - Disable NULL pointer detection just after EndOfDxe. <BR>
  759. # This is a workaround for those unsolvable NULL access issues in
  760. # OptionROM, boot loader, etc. It can also help to avoid unnecessary
  761. # exception caused by legacy memory (0-4095) access after EndOfDxe,
  762. # such as Windows 7 boot on Qemu.<BR>
  763. # @Prompt Enable NULL address detection.
  764. gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask|0x0|UINT8|0x30001050
  765. ## Init Value in Temp Stack to be shared between SEC and PEI_CORE
  766. # SEC fills the full temp stack with this values. When switch stack, PeiCore can check
  767. # this value in the temp stack to know how many stack has been used.
  768. # @Prompt Init Value in Temp Stack
  769. gEfiMdeModulePkgTokenSpaceGuid.PcdInitValueInTempStack|0x5AA55AA5|UINT32|0x30001051
  770. ## Indicates which type allocation need guard page.
  771. #
  772. # If a bit is set, a head guard page and a tail guard page will be added just
  773. # before and after corresponding type of pages allocated if there's enough
  774. # free pages for all of them. The page allocation for the type related to
  775. # cleared bits keeps the same as ususal.
  776. #
  777. # This PCD is only valid if BIT0 and/or BIT2 are set in PcdHeapGuardPropertyMask.
  778. #
  779. # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
  780. # EfiReservedMemoryType 0x0000000000000001<BR>
  781. # EfiLoaderCode 0x0000000000000002<BR>
  782. # EfiLoaderData 0x0000000000000004<BR>
  783. # EfiBootServicesCode 0x0000000000000008<BR>
  784. # EfiBootServicesData 0x0000000000000010<BR>
  785. # EfiRuntimeServicesCode 0x0000000000000020<BR>
  786. # EfiRuntimeServicesData 0x0000000000000040<BR>
  787. # EfiConventionalMemory 0x0000000000000080<BR>
  788. # EfiUnusableMemory 0x0000000000000100<BR>
  789. # EfiACPIReclaimMemory 0x0000000000000200<BR>
  790. # EfiACPIMemoryNVS 0x0000000000000400<BR>
  791. # EfiMemoryMappedIO 0x0000000000000800<BR>
  792. # EfiMemoryMappedIOPortSpace 0x0000000000001000<BR>
  793. # EfiPalCode 0x0000000000002000<BR>
  794. # EfiPersistentMemory 0x0000000000004000<BR>
  795. # OEM Reserved 0x4000000000000000<BR>
  796. # OS Reserved 0x8000000000000000<BR>
  797. # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.<BR>
  798. # @Prompt The memory type mask for Page Guard.
  799. gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType|0x0|UINT64|0x30001052
  800. ## Indicates which type allocation need guard page.
  801. #
  802. # If a bit is set, a head guard page and a tail guard page will be added just
  803. # before and after corresponding type of pages which the allocated pool occupies,
  804. # if there's enough free memory for all of them. The pool allocation for the
  805. # type related to cleared bits keeps the same as ususal.
  806. #
  807. # This PCD is only valid if BIT1 and/or BIT3 are set in PcdHeapGuardPropertyMask.
  808. #
  809. # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
  810. # EfiReservedMemoryType 0x0000000000000001<BR>
  811. # EfiLoaderCode 0x0000000000000002<BR>
  812. # EfiLoaderData 0x0000000000000004<BR>
  813. # EfiBootServicesCode 0x0000000000000008<BR>
  814. # EfiBootServicesData 0x0000000000000010<BR>
  815. # EfiRuntimeServicesCode 0x0000000000000020<BR>
  816. # EfiRuntimeServicesData 0x0000000000000040<BR>
  817. # EfiConventionalMemory 0x0000000000000080<BR>
  818. # EfiUnusableMemory 0x0000000000000100<BR>
  819. # EfiACPIReclaimMemory 0x0000000000000200<BR>
  820. # EfiACPIMemoryNVS 0x0000000000000400<BR>
  821. # EfiMemoryMappedIO 0x0000000000000800<BR>
  822. # EfiMemoryMappedIOPortSpace 0x0000000000001000<BR>
  823. # EfiPalCode 0x0000000000002000<BR>
  824. # EfiPersistentMemory 0x0000000000004000<BR>
  825. # OEM Reserved 0x4000000000000000<BR>
  826. # OS Reserved 0x8000000000000000<BR>
  827. # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.<BR>
  828. # @Prompt The memory type mask for Pool Guard.
  829. gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053
  830. ## This mask is to control Heap Guard behavior.
  831. #
  832. # Note:
  833. # a) Heap Guard is for debug purpose and should not be enabled in product
  834. # BIOS.
  835. # b) Due to the limit of pool memory implementation and the alignment
  836. # requirement of UEFI spec, BIT7 is a try-best setting which cannot
  837. # guarantee that the returned pool is exactly adjacent to head guard
  838. # page or tail guard page.
  839. # c) UEFI freed-memory guard and UEFI pool/page guard cannot be enabled
  840. # at the same time.
  841. #
  842. # BIT0 - Enable UEFI page guard.<BR>
  843. # BIT1 - Enable UEFI pool guard.<BR>
  844. # BIT2 - Enable SMM page guard.<BR>
  845. # BIT3 - Enable SMM pool guard.<BR>
  846. # BIT4 - Enable UEFI freed-memory guard (Use-After-Free memory detection).<BR>
  847. # BIT6 - Enable non-stop mode.<BR>
  848. # BIT7 - The direction of Guard Page for Pool Guard.
  849. # 0 - The returned pool is near the tail guard page.<BR>
  850. # 1 - The returned pool is near the head guard page.<BR>
  851. # @Prompt The Heap Guard feature mask
  852. gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask|0x0|UINT8|0x30001054
  853. ## Indicates if UEFI Stack Guard will be enabled.
  854. # If enabled, stack overflow in UEFI can be caught, preventing chaotic consequences.<BR><BR>
  855. # TRUE - UEFI Stack Guard will be enabled.<BR>
  856. # FALSE - UEFI Stack Guard will be disabled.<BR>
  857. # @Prompt Enable UEFI Stack Guard.
  858. gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard|FALSE|BOOLEAN|0x30001055
  859. [PcdsFixedAtBuild, PcdsPatchableInModule]
  860. ## Dynamic type PCD can be registered callback function for Pcd setting action.
  861. # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
  862. # for a dynamic PCD used in PEI phase.
  863. # @Prompt Max PEI PCD callback number per PCD entry.
  864. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
  865. ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress
  866. # to store PCD value.
  867. # @Prompt VPD base address.
  868. gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
  869. ## Maximum stack size for PeiCore.
  870. # @Prompt Maximum stack size for PeiCore.
  871. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
  872. ## The maximum size of a single non-HwErr type variable.
  873. # @Prompt Maximum variable size.
  874. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
  875. ## The maximum size of a single authenticated variable.
  876. # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
  877. # @Prompt Maximum authenticated variable size.
  878. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
  879. ## The maximum size of a single non-authenticated volatile variable.
  880. # The default value is 0 for compatibility: in that case, the maximum
  881. # non-authenticated volatile variable size remains specified by
  882. # PcdMaxVariableSize. Only the MdeModulePkg/Universal/Variable/RuntimeDxe
  883. # driver supports this PCD.
  884. # @Prompt Maximum non-authenticated volatile variable size.
  885. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVolatileVariableSize|0x00|UINT32|0x3000000a
  886. ## The maximum size of single hardware error record variable.<BR><BR>
  887. # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
  888. # In IA64 platforms, this value should be larger than 128KB.<BR>
  889. # @Prompt Maximum HwErr variable size.
  890. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
  891. ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
  892. # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
  893. # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
  894. # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
  895. # @Prompt HwErr variable storage size.
  896. gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
  897. ## The size of maximum user NV variable space.<BR><BR>
  898. # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
  899. # If the value is 0, it means user variable share the same NV storage with system variable,
  900. # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
  901. # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
  902. # otherwise the variable will be regarded as user variable.<BR>
  903. # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
  904. # 2) Variables managed by Variable driver internally.<BR>
  905. # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
  906. # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
  907. # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
  908. # @Prompt Maximum user NV variable space size.
  909. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
  910. ## The size of NV variable space reserved at UEFI boottime.<BR><BR>
  911. # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
  912. # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
  913. # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
  914. # Then the common NV variable space size at boottime will be
  915. # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
  916. # and the common NV variable space size at runtime will be
  917. # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
  918. # @Prompt Boottime reserved NV variable space size.
  919. gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
  920. ## Reclaim variable space at EndOfDxe.<BR><BR>
  921. # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
  922. # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
  923. # @Prompt Reclaim variable space at EndOfDxe.
  924. gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
  925. ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
  926. # @Prompt Variable storage size.
  927. gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
  928. ## Toggle for whether the VariablePolicy engine should allow disabling.
  929. # The engine is enabled at power-on, but the interface allows the platform to
  930. # disable enforcement for servicing flexibility. If this PCD is disabled, it will block the ability to
  931. # disable the enforcement and VariablePolicy enforcement will always be ON.
  932. # TRUE - VariablePolicy can be disabled by request through the interface (until interface is locked)
  933. # FALSE - VariablePolicy interface will not accept requests to disable and is ALWAYS ON
  934. # @Prompt Allow VariablePolicy enforcement to be disabled.
  935. gEfiMdeModulePkgTokenSpaceGuid.PcdAllowVariablePolicyEnforcementDisable|FALSE|BOOLEAN|0x30000020
  936. ## FFS filename to find the ACPI tables.
  937. # @Prompt FFS name of ACPI tables storage.
  938. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
  939. ## FFS filename to find the capsule coalesce image.
  940. # @Prompt FFS name of capsule coalesce image.
  941. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
  942. ## Maximum number of performance log entries during PEI phase.
  943. # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is
  944. # more than 255.
  945. # @Prompt Maximum number of PEI performance log entries.
  946. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
  947. ## Maximum number of performance log entries during PEI phase.
  948. # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of
  949. # entries. If greater than 0, then this PCD determines the number of entries,
  950. # and PcdMaxPeiPerformanceLogEntries is ignored.
  951. # @Prompt Maximum number of PEI performance log entries.
  952. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
  953. ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
  954. # TRUE - 16550 serial port registers are in MMIO space.<BR>
  955. # FALSE - 16550 serial port registers are in I/O space.<BR>
  956. # @Prompt Serial port registers use MMIO.
  957. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
  958. ## Indicates the access width for 16550 serial port registers.
  959. # Default is 8-bit access mode.<BR><BR>
  960. # 8 - 16550 serial port registers are accessed in 8-bit width.<BR>
  961. # 32 - 16550 serial port registers are accessed in 32-bit width.<BR>
  962. # @Prompt Serial port register access width.
  963. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterAccessWidth|8|UINT8|0x00020007
  964. ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
  965. # TRUE - 16550 serial port hardware flow control will be enabled.<BR>
  966. # FALSE - 16550 serial port hardware flow control will be disabled.<BR>
  967. # @Prompt Enable serial port hardware flow control.
  968. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
  969. ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
  970. # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
  971. # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
  972. # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
  973. # @Prompt Enable serial port cable detetion.
  974. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
  975. ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
  976. # @Prompt Base address of serial port registers.
  977. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
  978. ## Baud rate for the 16550 serial port. Default is 115200 baud.
  979. # @Prompt Baud rate for serial port.
  980. # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
  981. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
  982. ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
  983. # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
  984. # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
  985. # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
  986. # BIT7..BIT6 - Reserved. Must be 0.<BR>
  987. #
  988. # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
  989. # @Prompt Serial port Line Control settings.
  990. # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
  991. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
  992. ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
  993. # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>
  994. # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>
  995. # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>
  996. # BIT4..BIT3 - Reserved. Must be 0.<BR>
  997. # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>
  998. # BIT7..BIT6 - Reserved. Must be 0.<BR>
  999. #
  1000. # Default is to enable and clear all FIFOs.<BR>
  1001. # @Prompt Serial port FIFO Control settings.
  1002. # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
  1003. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
  1004. ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
  1005. # structure. The default value for this PCD is 0, which means that the DXE Core
  1006. # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
  1007. # boundary as close to the top of memory as feasible. If this PCD is set to a
  1008. # value other than 0, then the DXE Core will first attempt to allocate the
  1009. # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
  1010. # by this PCD, and if that allocation fails, retry the allocation on a 4MB
  1011. # boundary as close to the top of memory as feasible.
  1012. # @Prompt Maximum Efi System Table Pointer address.
  1013. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
  1014. ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
  1015. # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>
  1016. # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
  1017. # @Prompt Shadow Peim On S3 Boot.
  1018. gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
  1019. ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
  1020. # This PCD is used on other boot path except for S3 boot.
  1021. # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>
  1022. # FALSE - Not shadow PEIM after memory is ready.<BR>
  1023. # @Prompt Shadow Peim and PeiCore on boot
  1024. gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
  1025. ## Enable the feature that evacuate temporary memory to permanent memory or not<BR><BR>
  1026. # Set FALSE as default, if the developer need this feature to avoid this vulnerability, please
  1027. # enable it to shadow all PEIMs no matter the behavior controled by PcdShadowPeimOnBoot or
  1028. # PcdShadowPeimOnS3Boot<BR>
  1029. # TRUE - Evacuate temporary memory, the actions include copy memory, convert PPI pointers and so on.<BR>
  1030. # FALSE - Do nothing, for example, no copy memory, no convert PPI pointers and so on.<BR>
  1031. # @Prompt Evacuate temporary memory to permanent memory
  1032. gEfiMdeModulePkgTokenSpaceGuid.PcdMigrateTemporaryRamFirmwareVolumes|FALSE|BOOLEAN|0x3000102A
  1033. ## The mask is used to control memory profile behavior.<BR><BR>
  1034. # BIT0 - Enable UEFI memory profile.<BR>
  1035. # BIT1 - Enable SMRAM profile.<BR>
  1036. # BIT7 - Disable recording at the start.<BR>
  1037. # @Prompt Memory Profile Property.
  1038. # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0
  1039. gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
  1040. ## The mask is used to control SmiHandlerProfile behavior.<BR><BR>
  1041. # BIT0 - Enable SmiHandlerProfile.<BR>
  1042. # @Prompt SmiHandlerProfile Property.
  1043. # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask & 0xFE) == 0
  1044. gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask|0|UINT8|0x00000108
  1045. ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
  1046. # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
  1047. #
  1048. # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
  1049. # EfiReservedMemoryType 0x0001<BR>
  1050. # EfiLoaderCode 0x0002<BR>
  1051. # EfiLoaderData 0x0004<BR>
  1052. # EfiBootServicesCode 0x0008<BR>
  1053. # EfiBootServicesData 0x0010<BR>
  1054. # EfiRuntimeServicesCode 0x0020<BR>
  1055. # EfiRuntimeServicesData 0x0040<BR>
  1056. # EfiConventionalMemory 0x0080<BR>
  1057. # EfiUnusableMemory 0x0100<BR>
  1058. # EfiACPIReclaimMemory 0x0200<BR>
  1059. # EfiACPIMemoryNVS 0x0400<BR>
  1060. # EfiMemoryMappedIO 0x0800<BR>
  1061. # EfiMemoryMappedIOPortSpace 0x1000<BR>
  1062. # EfiPalCode 0x2000<BR>
  1063. # EfiPersistentMemory 0x4000<BR>
  1064. # OEM Reserved 0x4000000000000000<BR>
  1065. # OS Reserved 0x8000000000000000<BR>
  1066. #
  1067. # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
  1068. #
  1069. # @Prompt Memory profile memory type.
  1070. gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
  1071. ## This PCD is to control which drivers need memory profile data.<BR><BR>
  1072. # For example:<BR>
  1073. # One image only (Shell):<BR>
  1074. # Header GUID<BR>
  1075. # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
  1076. # 0x7F, 0xFF, 0x04, 0x00}<BR>
  1077. # Two or more images (Shell + WinNtSimpleFileSystem):<BR>
  1078. # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
  1079. # 0x7F, 0x01, 0x04, 0x00,<BR>
  1080. # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>
  1081. # 0x7F, 0xFF, 0x04, 0x00}<BR>
  1082. # @Prompt Memory profile driver path.
  1083. gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043
  1084. ## Set image protection policy. The policy is bitwise.
  1085. # If a bit is set, the image will be protected by DxeCore if it is aligned.
  1086. # The code section becomes read-only, and the data section becomes non-executable.
  1087. # If a bit is clear, nothing will be done to image code/data sections.<BR><BR>
  1088. # BIT0 - Image from unknown device. <BR>
  1089. # BIT1 - Image from firmware volume.<BR>
  1090. # <BR>
  1091. # Note: If a bit is cleared, the data section could be still non-executable if
  1092. # PcdDxeNxMemoryProtectionPolicy is enabled for EfiLoaderData, EfiBootServicesData
  1093. # and/or EfiRuntimeServicesData.<BR>
  1094. # <BR>
  1095. # @Prompt Set image protection policy.
  1096. # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F
  1097. gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047
  1098. ## Set DXE memory protection policy. The policy is bitwise.
  1099. # If a bit is set, memory regions of the associated type will be mapped
  1100. # non-executable.<BR>
  1101. # If a bit is cleared, nothing will be done to associated type of memory.<BR>
  1102. # <BR>
  1103. # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
  1104. # EfiReservedMemoryType 0x0001<BR>
  1105. # EfiLoaderCode 0x0002<BR>
  1106. # EfiLoaderData 0x0004<BR>
  1107. # EfiBootServicesCode 0x0008<BR>
  1108. # EfiBootServicesData 0x0010<BR>
  1109. # EfiRuntimeServicesCode 0x0020<BR>
  1110. # EfiRuntimeServicesData 0x0040<BR>
  1111. # EfiConventionalMemory 0x0080<BR>
  1112. # EfiUnusableMemory 0x0100<BR>
  1113. # EfiACPIReclaimMemory 0x0200<BR>
  1114. # EfiACPIMemoryNVS 0x0400<BR>
  1115. # EfiMemoryMappedIO 0x0800<BR>
  1116. # EfiMemoryMappedIOPortSpace 0x1000<BR>
  1117. # EfiPalCode 0x2000<BR>
  1118. # EfiPersistentMemory 0x4000<BR>
  1119. # OEM Reserved 0x4000000000000000<BR>
  1120. # OS Reserved 0x8000000000000000<BR>
  1121. #
  1122. # NOTE: User must NOT set NX protection for EfiLoaderCode / EfiBootServicesCode / EfiRuntimeServicesCode. <BR>
  1123. # User MUST set the same NX protection for EfiBootServicesData and EfiConventionalMemory. <BR>
  1124. #
  1125. # e.g. 0x7FD5 can be used for all memory except Code. <BR>
  1126. # e.g. 0x7BD4 can be used for all memory except Code and ACPINVS/Reserved. <BR>
  1127. #
  1128. # @Prompt Set DXE memory protection policy.
  1129. gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048
  1130. ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
  1131. # information that describes the path that contains zero or more PCI to PCI bridges
  1132. # followed by a PCI serial device. Each array entry is 4-bytes in length. The
  1133. # first byte is the PCI Device Number, then second byte is the PCI Function Number,
  1134. # and the last two bytes are the offset to the PCI power management capabilities
  1135. # register used to manage the D0-D3 states. If a PCI power management capabilities
  1136. # register is not present, then the last two bytes in the offset is set to 0. The
  1137. # array is terminated by an array entry with a PCI Device Number of 0xFF. For a
  1138. # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
  1139. # @Prompt Pci Serial Device Info
  1140. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
  1141. ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
  1142. # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
  1143. # describes the parameters of special PCI serial devices.
  1144. # Each array entry is 24-byte in length. The array is terminated
  1145. # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
  1146. # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
  1147. # The C style structure is defined as below:<BR>
  1148. # typedef struct {<BR>
  1149. # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>
  1150. # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>
  1151. # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>
  1152. # UINT64 Offset; ///< The byte offset into to the BAR.<BR>
  1153. # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>
  1154. # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>
  1155. # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
  1156. # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
  1157. # UINT8 Reserved[2];<BR>
  1158. # } PCI_SERIAL_PARAMETER;<BR>
  1159. # It contains zero or more instances of the above structure.<BR>
  1160. # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
  1161. # to contain two instances of the above structure, with the VendorId and DeviceId
  1162. # equals to the Device ID and Vendor ID of the device; If the PCI device uses the
  1163. # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
  1164. # BarIndex of second one equals to 1; If the PCI device uses the first BAR to
  1165. # support both UARTs, BarIndex of both instance equals to 0, Offset of first
  1166. # instance equals to 0 and Offset of second one equals to a value bigger than or
  1167. # equal to 8.<BR>
  1168. # For certain UART whose register needs to be accessed in DWORD aligned address,
  1169. # RegisterStride equals to 4.
  1170. # @Prompt Pci Serial Parameters
  1171. gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
  1172. ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
  1173. # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
  1174. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
  1175. ## This PCD points to the file name GUID of the BootManagerMenuApp
  1176. # Platform can customize the PCD to point to different application for Boot Manager Menu
  1177. # @Prompt Boot Manager Menu File
  1178. gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
  1179. ## This PCD points to the formset GUID of the driver health management form
  1180. # The form will be popped up by BDS core when there are Configuration Required driver health instances.
  1181. # Platform can customize the PCD to point to different formset.
  1182. # @Prompt Driver Health Management Form
  1183. gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
  1184. ## The number of bytes between registers in serial device. The default is 1 byte.
  1185. # @Prompt Serial Port Register Stride in Bytes
  1186. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
  1187. ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
  1188. # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
  1189. # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
  1190. # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
  1191. gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
  1192. ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS
  1193. # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h
  1194. # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>
  1195. # BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>
  1196. # BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>
  1197. # BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>
  1198. # BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>
  1199. # @Prompt Exposed ACPI table versions.
  1200. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
  1201. ## This PCD defines the MAX repair count.
  1202. # The default value is 0 that means infinite.
  1203. # @Prompt MAX repair count
  1204. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076
  1205. ## Status Code for Capsule subclass definitions.<BR><BR>
  1206. # EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE = 0x00810000<BR>
  1207. # NOTE: The default value of this PCD may collide with other OEM specific status codes.
  1208. # Override the value of this PCD in the platform DSC file as needed.
  1209. # @Prompt Status Code for Capsule subclass definitions
  1210. # @ValidList 0x80000003 | 0x00810000
  1211. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100
  1212. ## Status Code for Capsule Process Begin.<BR><BR>
  1213. # EFI_CAPSULE_PROCESS_CAPSULES_BEGIN = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001<BR>
  1214. # NOTE: The default value of this PCD may collide with other OEM specific status codes.
  1215. # Override the value of this PCD in the platform DSC file as needed.
  1216. # @Prompt Status Code for Capsule Process Begin
  1217. # @ValidList 0x80000003 | 0x00008001
  1218. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101
  1219. ## Status Code for Capsule Process End.<BR><BR>
  1220. # EFI_CAPSULE_PROCESS_CAPSULES_END = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002<BR>
  1221. # NOTE: The default value of this PCD may collide with other OEM specific status codes.
  1222. # Override the value of this PCD in the platform DSC file as needed.
  1223. # @Prompt Status Code for Capsule Process End
  1224. # @ValidList 0x80000003 | 0x00008002
  1225. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102
  1226. ## Status Code for Capsule Process Updating Firmware.<BR><BR>
  1227. # EFI_CAPSULE_UPDATING_FIRMWARE = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003<BR>
  1228. # NOTE: The default value of this PCD may collide with other OEM specific status codes.
  1229. # Override the value of this PCD in the platform DSC file as needed.
  1230. # @Prompt Status Code for Capsule Process Updating Firmware
  1231. # @ValidList 0x80000003 | 0x00008003
  1232. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103
  1233. ## Status Code for Capsule Process Update Firmware Success.<BR><BR>
  1234. # EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004<BR>
  1235. # NOTE: The default value of this PCD may collide with other OEM specific status codes.
  1236. # Override the value of this PCD in the platform DSC file as needed.
  1237. # @Prompt Status Code for Capsule Process Update Firmware Success
  1238. # @ValidList 0x80000003 | 0x00008004
  1239. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104
  1240. ## Status Code for Capsule Process Update Firmware Failed.<BR><BR>
  1241. # EFI_CAPSULE_UPDATE_FIRMWARE_FAILED = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005<BR>
  1242. # NOTE: The default value of this PCD may collide with other OEM specific status codes.
  1243. # Override the value of this PCD in the platform DSC file as needed.
  1244. # @Prompt Status Code for Capsule Process Update Firmware Failed
  1245. # @ValidList 0x80000003 | 0x00008005
  1246. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105
  1247. ## Status Code for Capsule Resetting System.<BR><BR>
  1248. # EFI_CAPSULE_RESETTING_SYSTEM = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006<BR>
  1249. # NOTE: The default value of this PCD may collide with other OEM specific status codes.
  1250. # Override the value of this PCD in the platform DSC file as needed.
  1251. # @Prompt Status Code for Capsule Resetting System
  1252. # @ValidList 0x80000003 | 0x00008006
  1253. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106
  1254. ## CapsuleMax value in capsule report variable.
  1255. # @Prompt CapsuleMax value in capsule report variable.
  1256. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107
  1257. ## Control which FPDT record format will be used to store the performance entry.
  1258. # On TRUE, the string FPDT record will be used to store every performance entry.
  1259. # On FALSE, the different FPDT record will be used to store the different performance entries.
  1260. # @Prompt String FPDT Record Enable Only
  1261. gEfiMdeModulePkgTokenSpaceGuid.PcdEdkiiFpdtStringRecordEnableOnly|FALSE|BOOLEAN|0x00000109
  1262. ## Indicates the allowable maximum number of Reset Filters, Reset Notifications or Reset Handlers in PEI phase.
  1263. # @Prompt Maximum Number of PEI Reset Filters, Reset Notifications or Reset Handlers.
  1264. gEfiMdeModulePkgTokenSpaceGuid.PcdMaximumPeiResetNotifies|0x10|UINT32|0x0000010A
  1265. ## Capsule On Disk is to deliver capsules via files on Mass Storage device.<BR><BR>
  1266. # This PCD indicates if the Capsule On Disk is supported.<BR>
  1267. # TRUE - Capsule On Disk is supported.<BR>
  1268. # FALSE - Capsule On Disk is not supported.<BR>
  1269. # If platform does not use this feature, this PCD should be set to FALSE.<BR><BR>
  1270. # Two sulotions to deliver Capsule On Disk:<BR>
  1271. # a) If PcdCapsuleInRamSupport = TRUE, Load Capsule On Disk image out of TCB, and reuse
  1272. # Capsule In Ram to deliver capsule.<BR>
  1273. # b) If PcdCapsuleInRamSupport = FALSE, Relocate Capsule On Disk image to RootDir out
  1274. # of TCB, and reuse FatPei to load capsules from external storage.<BR>
  1275. # Note:<BR>
  1276. # If Both Capsule In Ram and Capsule On Disk are provisioned at the same time, the Capsule
  1277. # On Disk will be bypassed.
  1278. # @Prompt Enable Capsule On Disk support.
  1279. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleOnDiskSupport|FALSE|BOOLEAN|0x0000002d
  1280. ## Maximum permitted encapsulation levels of sections in a firmware volume,
  1281. # in the DXE phase. Minimum value is 1. Sections nested more deeply are
  1282. # rejected.
  1283. # @Prompt Maximum permitted FwVol section nesting depth (exclusive).
  1284. gEfiMdeModulePkgTokenSpaceGuid.PcdFwVolDxeMaxEncapsulationDepth|0x10|UINT32|0x00000030
  1285. ## Indicates the default timeout value for SD/MMC Host Controller operations in microseconds.
  1286. # @Prompt SD/MMC Host Controller Operations Timeout (us).
  1287. gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcGenericTimeoutValue|1000000|UINT32|0x00000031
  1288. ## The Retry Count of AHCI command if there is a failure
  1289. # @Prompt The value of Retry Count, Default value is 5.
  1290. gEfiMdeModulePkgTokenSpaceGuid.PcdAhciCommandRetryCount|5|UINT32|0x00000032
  1291. [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
  1292. ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
  1293. # This PCD could be set to 0 then console output would be at max column and max row.
  1294. # @Prompt Console output row.
  1295. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
  1296. ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
  1297. # This PCD could be set to 0 then console output would be at max column and max row.
  1298. # @Prompt Console output column.
  1299. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
  1300. ## This PCD defines the video horizontal resolution.
  1301. # If this PCD is set to 0 then video resolution would be at highest resolution.
  1302. # @Prompt Video horizontal resolution.
  1303. gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
  1304. ## This PCD defines the video vertical resolution.
  1305. # If this PCD is set to 0 then video resolution would be at highest resolution.
  1306. # @Prompt Video vertical resolution.
  1307. gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
  1308. # The 4 PCDs below are used to specify the video resolution and text mode of text setup.
  1309. # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
  1310. # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
  1311. # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
  1312. # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
  1313. # for text setup.
  1314. ## Specify the video horizontal resolution of text setup.
  1315. # @Prompt Video Horizontal Resolution of Text Setup
  1316. gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
  1317. ## Specify the video vertical resolution of text setup.
  1318. # @Prompt Video Vertical Resolution of Text Setup
  1319. gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
  1320. ## Specify the console output column of text setup.
  1321. # @Prompt Console Output Column of Text Setup
  1322. gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
  1323. ## Specify the console output row of text setup.
  1324. # @Prompt Console Output Row of Text Setup
  1325. gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
  1326. ## Specify the Boot Discovery Policy settings
  1327. # To support configuring from setup page, this PCD should be overridden in DynamicHii type in its platform .dsc:
  1328. # gEfiMdeModulePkgTokenSpaceGuid.PcdBootDiscoveryPolicy|L"BootDiscoveryPolicy"|gBootDiscoveryPolicyMgrFormsetGuid|0
  1329. # @Prompt Boot Discovery Policy
  1330. gEfiMdeModulePkgTokenSpaceGuid.PcdBootDiscoveryPolicy|2|UINT32|0x4000000f
  1331. [PcdsFixedAtBuild.AARCH64, PcdsPatchableInModule.AARCH64]
  1332. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x20|UINT32|0x0001004c
  1333. [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
  1334. ## UART clock frequency is for the baud rate configuration.
  1335. # @Prompt Serial Port Clock Rate.
  1336. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
  1337. ## This PCD points to the front page formset GUID
  1338. # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
  1339. # @Prompt Front Page Formset.
  1340. gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
  1341. ## Base address of the NV variable range in flash device.
  1342. # @Prompt Base address of flash NV variable range.
  1343. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
  1344. ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
  1345. # The root cause is that variable driver will use FTW protocol to reclaim variable region.
  1346. # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
  1347. # be reflushed through the manner of fault tolerant write.
  1348. # @Prompt Size of flash NV variable range.
  1349. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
  1350. ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
  1351. # @Prompt Base address of flash FTW spare block range.
  1352. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
  1353. ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
  1354. # The root cause is that variable driver will use FTW protocol to reclaim variable region.
  1355. # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
  1356. # be reflushed through the manner of fault tolerant write.
  1357. # @Prompt Size of flash FTW spare block range.
  1358. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
  1359. ## Base address of the FTW working block range in flash device.
  1360. # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
  1361. # @Prompt Base address of flash FTW working block range.
  1362. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
  1363. ## Size of the FTW working block range.
  1364. # If the value is less than one block size, the work space range should not span blocks.
  1365. # If the value is larger than one block size, it should be block size aligned.
  1366. # @Prompt Size of flash FTW working block range.
  1367. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
  1368. ## 64-bit Base address of the NV variable range in flash device.
  1369. # @Prompt 64-bit Base address of flash NV variable range.
  1370. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
  1371. ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
  1372. # @Prompt 64-bit Base address of flash FTW spare block range.
  1373. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
  1374. ## 64-bit Base address of the FTW working block range in flash device.
  1375. # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
  1376. # @Prompt 64-bit Base address of flash FTW working block range.
  1377. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
  1378. ## Indicates if Variable driver will enable emulated variable NV mode.<BR><BR>
  1379. # If this PCD is configured to dynamic, its value should be set before Variable driver starts to work,<BR>
  1380. # otherwise default value will take effect.<BR>
  1381. # TRUE - An EMU variable NV storage will be allocated or reserved for NV variables.<BR>
  1382. # FALSE - No EMU variable NV storage will be allocated or reserved for NV variables.<BR>
  1383. # @Prompt EMU variable NV mode enable.
  1384. gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|FALSE|BOOLEAN|0x01100001
  1385. ## This PCD defines the base address of reserved memory range for EMU variable NV storage.
  1386. # A non-ZERO value indicates a valid range reserved with size given by PcdVariableStoreSize.
  1387. # @Prompt Base of reserved memory range for EMU variable NV storage.
  1388. gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
  1389. ## This PCD defines the times to print hello world string.
  1390. # This PCD is a sample to explain UINT32 PCD usage.
  1391. # @Prompt HellowWorld print times.
  1392. gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
  1393. ## This PCD defines the HelloWorld print string.
  1394. # This PCD is a sample to explain String typed PCD usage.
  1395. # @Prompt HelloWorld print string.
  1396. gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
  1397. ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
  1398. # The default max size is 100MB (0x6400000) for more than one large capsule images.
  1399. # @Prompt Max size of populated capsule.
  1400. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
  1401. ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
  1402. # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
  1403. # @Prompt Max size of non-populated capsule.
  1404. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
  1405. ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
  1406. # @Prompt Firmware vendor.
  1407. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
  1408. ## Firmware revision that is the default revision filled into the EFI System Table.
  1409. # @Prompt Firmware revision.
  1410. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
  1411. ## Null-terminated Unicode string that describes the firmware version.
  1412. # @Prompt Firmware version string.
  1413. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
  1414. ## Null-terminated Unicode string that contains the date the firmware was released
  1415. # @Prompt Firmware release data string.
  1416. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
  1417. ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
  1418. # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
  1419. # The default value in PeiPhase is 1 KBytes.<BR>
  1420. # The default value in DxePhase is 128 KBytes.<BR>
  1421. # @Prompt StatusCode memory size.
  1422. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
  1423. ## Indicates if to reset system when memory type information changes.<BR><BR>
  1424. # TRUE - Resets system when memory type information changes.<BR>
  1425. # FALSE - Does not reset system when memory type information changes.<BR>
  1426. # @Prompt Reset on memory type information change.
  1427. gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
  1428. ## Indicates if the BDS supports Platform Recovery.<BR><BR>
  1429. # TRUE - BDS supports Platform Recovery.<BR>
  1430. # FALSE - BDS does not support Platform Recovery.<BR>
  1431. # @Prompt Support Platform Recovery.
  1432. gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformRecoverySupport|TRUE|BOOLEAN|0x00010078
  1433. ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
  1434. # Only following values defined in UEFI specification are valid:<BR><BR>
  1435. # 0x00 (EFI_BLACK)<BR>
  1436. # 0x01 (EFI_BLUE)<BR>
  1437. # 0x02 (EFI_GREEN)<BR>
  1438. # 0x03 (EFI_CYAN)<BR>
  1439. # 0x04 (EFI_RED)<BR>
  1440. # 0x05 (EFI_MAGENTA)<BR>
  1441. # 0x06 (EFI_BROWN)<BR>
  1442. # 0x07 (EFI_LIGHTGRAY)<BR>
  1443. # 0x08 (EFI_DARKGRAY)<BR>
  1444. # 0x09 (EFI_LIGHTBLUE)<BR>
  1445. # 0x0A (EFI_LIGHTGREEN)<BR>
  1446. # 0x0B (EFI_LIGHTCYAN)<BR>
  1447. # 0x0C (EFI_LIGHTRED)<BR>
  1448. # 0x0D (EFI_LIGHTMAGENTA)<BR>
  1449. # 0x0E (EFI_YELLOW)<BR>
  1450. # 0x0F (EFI_WHITE)<BR>
  1451. # @Prompt Foreground color for browser subtile.
  1452. # @ValidRange 0x80000004 | 0x00 - 0x0F
  1453. gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
  1454. ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
  1455. # Only following values defined in UEFI specification are valid:<BR><BR>
  1456. # 0x00 (EFI_BLACK)<BR>
  1457. # 0x01 (EFI_BLUE)<BR>
  1458. # 0x02 (EFI_GREEN)<BR>
  1459. # 0x03 (EFI_CYAN)<BR>
  1460. # 0x04 (EFI_RED)<BR>
  1461. # 0x05 (EFI_MAGENTA)<BR>
  1462. # 0x06 (EFI_BROWN)<BR>
  1463. # 0x07 (EFI_LIGHTGRAY)<BR>
  1464. # 0x08 (EFI_DARKGRAY)<BR>
  1465. # 0x09 (EFI_LIGHTBLUE)<BR>
  1466. # 0x0A (EFI_LIGHTGREEN)<BR>
  1467. # 0x0B (EFI_LIGHTCYAN)<BR>
  1468. # 0x0C (EFI_LIGHTRED)<BR>
  1469. # 0x0D (EFI_LIGHTMAGENTA)<BR>
  1470. # 0x0E (EFI_YELLOW)<BR>
  1471. # 0x0F (EFI_WHITE)<BR>
  1472. # @Prompt Foreground color for browser field.
  1473. # @ValidRange 0x80000004 | 0x00 - 0x0F
  1474. gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
  1475. ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
  1476. # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
  1477. # 0x00 (EFI_BLACK)<BR>
  1478. # 0x01 (EFI_BLUE)<BR>
  1479. # 0x02 (EFI_GREEN)<BR>
  1480. # 0x03 (EFI_CYAN)<BR>
  1481. # 0x04 (EFI_RED)<BR>
  1482. # 0x05 (EFI_MAGENTA)<BR>
  1483. # 0x06 (EFI_BROWN)<BR>
  1484. # 0x07 (EFI_LIGHTGRAY)<BR>
  1485. # 0x08 (EFI_DARKGRAY)<BR>
  1486. # 0x09 (EFI_LIGHTBLUE)<BR>
  1487. # 0x0A (EFI_LIGHTGREEN)<BR>
  1488. # 0x0B (EFI_LIGHTCYAN)<BR>
  1489. # 0x0C (EFI_LIGHTRED)<BR>
  1490. # 0x0D (EFI_LIGHTMAGENTA)<BR>
  1491. # 0x0E (EFI_YELLOW)<BR>
  1492. # 0x0F (EFI_WHITE)<BR>
  1493. # @Prompt Foreground color for highlighted browser field.
  1494. # @ValidRange 0x80000004 | 0x00 - 0x0F
  1495. gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
  1496. ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
  1497. # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
  1498. # 0x00 (EFI_BACKGROUND_BLACK)<BR>
  1499. # 0x10 (EFI_BACKGROUND_BLUE)<BR>
  1500. # 0x20 (EFI_BACKGROUND_GREEN)<BR>
  1501. # 0x30 (EFI_BACKGROUND_CYAN)<BR>
  1502. # 0x40 (EFI_BACKGROUND_RED)<BR>
  1503. # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>
  1504. # 0x60 (EFI_BACKGROUND_BROWN)<BR>
  1505. # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
  1506. # @Prompt Background color for highlighted browser field.
  1507. # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
  1508. gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
  1509. ## Time in second to delay for SATA devices to spin-up for recovery.
  1510. # @Prompt SATA spin-up delay time in second for recovery path.
  1511. gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
  1512. ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
  1513. # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
  1514. # When changing the value of this PCD, the platform developer should make sure the memory size is
  1515. # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
  1516. # @Prompt Reserved page number for S3 Boot Script Runtime Table.
  1517. gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
  1518. ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
  1519. # The default size is 32K. When changing the value of this PCD, the platform developer should
  1520. # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
  1521. # @Prompt Stack size for CapsulePei transfer to long mode.
  1522. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
  1523. ## Indicates if 1G page table will be enabled.<BR><BR>
  1524. # TRUE - 1G page table will be enabled.<BR>
  1525. # FALSE - 1G page table will not be enabled.<BR>
  1526. # @Prompt Enable 1G page table support.
  1527. gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
  1528. ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
  1529. # TRUE - Single Root I/O virtualization is supported.<BR>
  1530. # FALSE - Single Root I/O virtualization is not supported.<BR>
  1531. # @Prompt Enable SRIOV support.
  1532. gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
  1533. ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
  1534. # TRUE - Alternative Routing-ID is supported.<BR>
  1535. # FALSE - Alternative Routing-ID is not supported.<BR>
  1536. # @Prompt Enable ARI support.
  1537. gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
  1538. ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
  1539. # TRUE - Multi Root I/O virtualization is supported.<BR>
  1540. # FALSE - Multi Root I/O virtualization is not supported.<BR>
  1541. # @Prompt Enable MRIOV support.
  1542. gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
  1543. ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
  1544. # BITN set indicates 2 of n+12 power<BR>
  1545. # BIT0 set indicates 4KB alignment<BR>
  1546. # BIT1 set indicates 8KB alignment<BR>
  1547. # @Prompt SRIOV system page size.
  1548. gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
  1549. ## SMBIOS version.
  1550. # @Prompt SMBIOS version.
  1551. gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0303|UINT16|0x00010055
  1552. ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
  1553. # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
  1554. gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A
  1555. ## SMBIOS produce method.
  1556. # BIT0 set indicates 32-bit entry point and table are produced.<BR>
  1557. # BIT1 set indicates 64-bit entry point and table are produced.<BR>
  1558. # @Prompt The policy to produce SMBIOS entry point and table.
  1559. gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
  1560. ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
  1561. # the extension FPDT boot records received after EndOfDxe and before ExitBootService.
  1562. # @Prompt Pad size for extension FPDT boot records.
  1563. gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x30000|UINT32|0x0001005F
  1564. ## Indicates if ConIn device are connected on demand.<BR><BR>
  1565. # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
  1566. # by Consplitter should be called before any real key read operation.<BR>
  1567. # FALSE - ConIn device may be connected normally during BDS.<BR>
  1568. # @Prompt ConIn connect on demand.
  1569. gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
  1570. ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
  1571. # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
  1572. # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
  1573. # @Prompt Enable ATA S.M.A.R.T feature.
  1574. gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
  1575. ## Indicates if full PCI enumeration is disabled.<BR><BR>
  1576. # TRUE - Full PCI enumeration is disabled.<BR>
  1577. # FALSE - Full PCI enumeration is not disabled.<BR>
  1578. # @Prompt Disable full PCI enumeration.
  1579. gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
  1580. ## Disk I/O - Number of Data Buffer block.
  1581. # Define the size in block of the pre-allocated buffer. It provide better
  1582. # performance for large Disk I/O requests.
  1583. # @Prompt Disk I/O - Number of Data Buffer block.
  1584. gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
  1585. ## This PCD specifies the PCI-based UFS host controller mmio base address.
  1586. # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
  1587. # host controllers, their mmio base addresses are calculated one by one from this base address.
  1588. # @Prompt Mmio base address of pci-based UFS host controller.
  1589. gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
  1590. ## Specify Max ESRT cache entry number supported for FMP instances
  1591. #
  1592. # @Prompt Max FMP ESRT entry number to be synced & cached in repository.
  1593. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
  1594. ## Specify Max ESRT cache entry number supported for Non FMP instances
  1595. #
  1596. # @Prompt Max Non-FMP ESRT entry number to be cached in repository.
  1597. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
  1598. ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
  1599. #
  1600. # @Prompt Flag to request system reboot after processing capsule.
  1601. gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
  1602. ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
  1603. # @Prompt Default OEM ID for ACPI table creation.
  1604. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
  1605. ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
  1606. # According to ACPI specification, this field is particularly useful when
  1607. # defining a definition block to distinguish definition block functions.
  1608. # The OEM assigns each dissimilar table a new OEM Table ID.
  1609. # This PCD is ignored for definition block.
  1610. # @Prompt Default OEM Table ID for ACPI table creation.
  1611. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
  1612. ## Default OEM Revision for ACPI table creation.
  1613. # According to ACPI specification, for LoadTable() opcode, the OS can also
  1614. # check the OEM Table ID and Revision ID against a database for a newer
  1615. # revision Definition Block of the same OEM Table ID and load it instead.
  1616. # This PCD is ignored for definition block.
  1617. # @Prompt Default OEM Revision for ACPI table creation.
  1618. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
  1619. ## Default Creator ID for ACPI table creation.
  1620. # According to ACPI specification, for tables containing Definition Blocks,
  1621. # this is the ID for the ASL Compiler.
  1622. # This PCD is ignored for definition block.
  1623. # @Prompt Default Creator ID for ACPI table creation.
  1624. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
  1625. ## Default Creator Revision for ACPI table creation.
  1626. # According to ACPI specification, for tables containing Definition Blocks,
  1627. # this is the revision for the ASL Compiler.
  1628. # This PCD is ignored for definition block.
  1629. # @Prompt Default Creator Revision for ACPI table creation.
  1630. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
  1631. ## Indicates if to set NX for stack.<BR><BR>
  1632. # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
  1633. # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
  1634. # IA32 PAE is supported and Execute Disable Bit is available.<BR>
  1635. # <BR>
  1636. # TRUE - Set NX for stack.<BR>
  1637. # FALSE - Do nothing for stack.<BR>
  1638. # <BR>
  1639. # Note: If this PCD is set to FALSE, NX could be still applied to stack due to PcdDxeNxMemoryProtectionPolicy enabled for
  1640. # EfiBootServicesData.<BR>
  1641. # <BR>
  1642. # @Prompt Set NX for stack.
  1643. gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
  1644. ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.
  1645. # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC
  1646. # host controllers, their mmio base addresses are calculated one by one from this base address.
  1647. # @Prompt Mmio base address of pci-based SD/MMC host controller.
  1648. gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043
  1649. ## Indicates if ACPI S3 will be enabled.<BR><BR>
  1650. # TRUE - ACPI S3 will be enabled.<BR>
  1651. # FALSE - ACPI S3 will be disabled.<BR>
  1652. # @Prompt ACPI S3 Enable.
  1653. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
  1654. ## Specify memory size for boot script executor stack usage in S3 phase.
  1655. # The default size 32K. When changing the value make sure the memory size is large enough
  1656. # to meet boot script executor requirement in the S3 phase.
  1657. # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
  1658. gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
  1659. ## Indicates if to use the optimized timing for best PS2 detection performance.
  1660. # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>
  1661. # TRUE - Use the optimized timing for best PS2 detection performance.<BR>
  1662. # FALSE - Use the normal timing to detect PS2.<BR>
  1663. # @Prompt Enable fast PS2 detection
  1664. gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044
  1665. ## This is recover file name in PEI phase.
  1666. # The file must be in the root directory.
  1667. # The file name must be the 8.3 format.
  1668. # The PCD data must be in UNICODE format.
  1669. # @Prompt Recover file name in PEI phase
  1670. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
  1671. ## This is Capsule Temp Relocation file name in PEI phase.
  1672. # The file must be in the root directory.
  1673. # The file name must be the 8.3 format.
  1674. # The PCD data must be in UNICODE format.
  1675. # CapsuleOnDiskLoadPei PEI module will set value of this PCD to PcdRecoveryFileName, then
  1676. # leverage recovery to get Capsule On Disk Temp Relocation file.
  1677. # Note: The file name must be shorter than PcdRecoveryFileName, otherwise CapsuleOnDiskLoadPei
  1678. # PEI module will fail to get Capsule On Disk Temp Relocation file.
  1679. # @Prompt Capsule On Disk Temp Relocation file name in PEI phase
  1680. gEfiMdeModulePkgTokenSpaceGuid.PcdCoDRelocationFileName|L"Cod.tmp"|VOID*|0x30001048
  1681. ## This PCD hold a list GUIDs for the ImageTypeId to indicate the
  1682. # FMP capsule is a system FMP.
  1683. # @Prompt A list of system FMP ImageTypeId GUIDs
  1684. gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046
  1685. ## This PCD holds the address mask for page table entries when memory encryption is
  1686. # enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.
  1687. # This mask should be applied when creating 1:1 virtual to physical mapping tables.
  1688. # @Prompt The address mask when memory encryption is enabled.
  1689. gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047
  1690. ## Indicates if 5-Level Paging will be enabled in long mode. 5-Level Paging will not be enabled
  1691. # when the PCD is TRUE but CPU doesn't support 5-Level Paging.
  1692. # TRUE - 5-Level Paging will be enabled.<BR>
  1693. # FALSE - 5-Level Paging will not be enabled.<BR>
  1694. # @Prompt Enable 5-Level Paging support in long mode.
  1695. gEfiMdeModulePkgTokenSpaceGuid.PcdUse5LevelPageTable|FALSE|BOOLEAN|0x0001105F
  1696. ## Capsule In Ram is to use memory to deliver the capsules that will be processed after system
  1697. # reset.<BR><BR>
  1698. # This PCD indicates if the Capsule In Ram is supported.<BR>
  1699. # TRUE - Capsule In Ram is supported.<BR>
  1700. # FALSE - Capsule In Ram is not supported.
  1701. # @Prompt Enable Capsule In Ram support.
  1702. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleInRamSupport|TRUE|BOOLEAN|0x0000002e
  1703. ## Full device path of platform specific device to store Capsule On Disk temp relocation file.<BR>
  1704. # If this PCD is set, Capsule On Disk temp relocation file will be stored in the device specified
  1705. # by this PCD, instead of the EFI System Partition that stores capsule image file.
  1706. # @Prompt Capsule On Disk relocation device path.
  1707. gEfiMdeModulePkgTokenSpaceGuid.PcdCodRelocationDevPath|{0xFF}|VOID*|0x0000002f
  1708. ## Indicates which TCG Platform Firmware Profile revision the EDKII firmware follows.
  1709. # The revision number is defined in MdePkg/Include/IndustryStandard/UefiTcgPlatform.h
  1710. # 0: This is for compatiblity support.
  1711. # 105: This is the first revision to support 800-155 is related event, such as
  1712. # EV_EFI_PLATFORM_FIRMWARE_BLOB2 and EV_EFI_HANDOFF_TABLES2.
  1713. # @Prompt TCG Platform Firmware Profile revision.
  1714. gEfiMdeModulePkgTokenSpaceGuid.PcdTcgPfpMeasurementRevision|0|UINT32|0x00010077
  1715. ## Indicates if StatusCode is reported via Serial port.<BR><BR>
  1716. # TRUE - Reports StatusCode via Serial port.<BR>
  1717. # FALSE - Does not report StatusCode via Serial port.<BR>
  1718. # @Prompt Enable StatusCode via Serial port.
  1719. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
  1720. ## Indicates if StatusCode is stored in memory.
  1721. # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
  1722. # TRUE - Stores StatusCode in memory.<BR>
  1723. # FALSE - Does not store StatusCode in memory.<BR>
  1724. # @Prompt Enable StatusCode via memory.
  1725. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
  1726. ## Indicates if the PCIe Resizable BAR Capability Supported.<BR><BR>
  1727. # TRUE - PCIe Resizable BAR Capability is supported.<BR>
  1728. # FALSE - PCIe Resizable BAR Capability is not supported.<BR>
  1729. # @Prompt Enable PCIe Resizable BAR Capability support.
  1730. gEfiMdeModulePkgTokenSpaceGuid.PcdPcieResizableBarSupport|FALSE|BOOLEAN|0x10000024
  1731. ## This PCD holds the shared bit mask for page table entries when Tdx is enabled.
  1732. # @Prompt The shared bit mask when Intel Tdx is enabled.
  1733. gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
  1734. [PcdsPatchableInModule]
  1735. ## Specify memory size with page number for PEI code when
  1736. # Loading Module at Fixed Address feature is enabled.
  1737. # The value will be set by the build tool.
  1738. # @Prompt LMFA PEI code page number.
  1739. # @ValidList 0x80000001 | 0
  1740. gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
  1741. ## Specify memory size with page number for DXE boot time code when
  1742. # Loading Module at Fixed Address feature is enabled.
  1743. # The value will be set by the build tool.
  1744. # @Prompt LMFA DXE boot code page number.
  1745. # @ValidList 0x80000001 | 0
  1746. gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
  1747. ## Specify memory size with page number for DXE runtime code when
  1748. # Loading Module at Fixed Address feature is enabled.
  1749. # The value will be set by the build tool.
  1750. # @Prompt LMFA DXE runtime code page number.
  1751. # @ValidList 0x80000001 | 0
  1752. gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
  1753. ## Specify memory size with page number for SMM code when
  1754. # Loading Module at Fixed Address feature is enabled.
  1755. # The value will be set by the build tool.
  1756. # @Prompt LMFA SMM code page number.
  1757. # @ValidList 0x80000001 | 0
  1758. gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
  1759. [PcdsDynamic, PcdsDynamicEx]
  1760. ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
  1761. # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
  1762. # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
  1763. # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
  1764. # @Prompt S3 Boot Script Table Private Data pointer.
  1765. # @ValidList 0x80000001 | 0x0
  1766. gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
  1767. ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
  1768. # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
  1769. # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
  1770. # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
  1771. # @Prompt S3 Boot Script Table Private Smm Data pointer.
  1772. # @ValidList 0x80000001 | 0x0
  1773. gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
  1774. ## This dynamic PCD holds the information if there is any test key used by the platform.
  1775. # @Prompt If there is any test key used by the platform.
  1776. gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
  1777. ## This dynamic PCD holds the base address of the Guest-Hypervisor Communication Block (GHCB) pool allocation.
  1778. # @Prompt GHCB Pool Base Address
  1779. gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase|0|UINT64|0x00030007
  1780. ## This dynamic PCD holds the total size of the Guest-Hypervisor Communication Block (GHCB) pool allocation.
  1781. # The amount of memory allocated for GHCBs is dependent on the number of APs.
  1782. # @Prompt GHCB Pool Size
  1783. gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize|0|UINT64|0x00030008
  1784. [PcdsDynamicEx]
  1785. ## This dynamic PCD enables the default variable setting.
  1786. # Its value is the default store ID value. The default value is zero as Standard default.
  1787. # When its value is set in PEI, it will trig the default setting to be applied as the default EFI variable.
  1788. # @Prompt NV Storage DefaultId
  1789. gEfiMdeModulePkgTokenSpaceGuid.PcdSetNvStoreDefaultId|0x0|UINT16|0x00030004
  1790. ## This dynamic PCD holds the DynamicHii PCD value. Its value is the auto generated.
  1791. # @Prompt NV Storage Default Value Buffer
  1792. gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer|{0x0}|VOID*|0x00030005
  1793. ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress64
  1794. # to store PCD value. It will be DynamicExDefault only.
  1795. # It is used to set VPD region base address. So, it can't be DynamicExVpd PCD. Its value is
  1796. # required to be accessed in PcdDxe driver entry point. So, its value must be set in PEI phase.
  1797. # It can't depend on EFI variable service, and can't be DynamicExHii PCD.
  1798. # @Prompt 64bit VPD base address.
  1799. gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress64|0x0|UINT64|0x00030006
  1800. [UserExtensions.TianoCore."ExtraFiles"]
  1801. MdeModulePkgExtra.uni