Browse Source

ArmPlatformPkg: Retire NorFlashDxe driver

The NorFlashDxe driver in ArmPlatformPkg was shared between development
platforms built by ARM Ltd, and virtual platforms that were once modeled
after Versatile Express, but have very little in common with actual bare
metal implementations.

Both sides have migrated to a domain specific version of the driver, so
we can retire the old one.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Ard Biesheuvel 1 year ago
parent
commit
cc650a0378

+ 0 - 6
ArmPlatformPkg/ArmPlatformPkg.dec

@@ -38,10 +38,6 @@
   #
   LcdPlatformLib|Include/Library/LcdPlatformLib.h
 
-  ##  @libraryclass  Provides a Nor flash interface.
-  #
-  NorFlashPlatformLib|Include/Library/NorFlashPlatformLib.h
-
   ##  @libraryclass  Provides an interface to the clock of a PL011 device.
   #
   PL011UartClockLib|Include/Library/PL011UartClockLib.h
@@ -56,8 +52,6 @@
 [PcdsFeatureFlag.common]
   gArmPlatformTokenSpaceGuid.PcdSendSgiToBringUpSecondaryCores|FALSE|BOOLEAN|0x00000004
 
-  gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked|FALSE|BOOLEAN|0x0000003C
-
   # Disable the GOP controller on ExitBootServices(). By default the value is FALSE,
   # we assume the OS will handle the FrameBuffer from the UEFI GOP information.
   gArmPlatformTokenSpaceGuid.PcdGopDisableOnExitBootServices|FALSE|BOOLEAN|0x0000003D

+ 0 - 6
ArmPlatformPkg/ArmPlatformPkg.dsc

@@ -55,7 +55,6 @@
   LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
   MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
   MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf
-  NorFlashPlatformLib|ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
   PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
   PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
   PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
@@ -100,7 +99,6 @@
 
 [Components.common]
   ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
-  ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
   ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
   ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 
@@ -109,7 +107,6 @@
   ArmPlatformPkg/Library/HdLcd/HdLcd.inf
   ArmPlatformPkg/Library/LcdHwNullLib/LcdHwNullLib.inf
   ArmPlatformPkg/Library/LcdPlatformNullLib/LcdPlatformNullLib.inf
-  ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
   ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
   ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
   ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
@@ -130,6 +127,3 @@
   ArmPlatformPkg/PrePi/PeiUniCore.inf
 
   ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf
-
-[Components.AARCH64]
-  ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf

+ 0 - 991
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c

@@ -1,991 +0,0 @@
-/** @file  NorFlash.c
-
-  Copyright (c) 2011 - 2020, Arm Limited. All rights reserved.<BR>
-  Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
-
-  SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/BaseMemoryLib.h>
-
-#include "NorFlash.h"
-
-//
-// Global variable declarations
-//
-extern NOR_FLASH_INSTANCE  **mNorFlashInstances;
-extern UINT32              mNorFlashDeviceCount;
-
-UINT32
-NorFlashReadStatusRegister (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               SR_Address
-  )
-{
-  // Prepare to read the status register
-  SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_STATUS_REGISTER);
-  return MmioRead32 (Instance->DeviceBaseAddress);
-}
-
-STATIC
-BOOLEAN
-NorFlashBlockIsLocked (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  )
-{
-  UINT32  LockStatus;
-
-  // Send command for reading device id
-  SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
-
-  // Read block lock status
-  LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
-
-  // Decode block lock status
-  LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
-
-  if ((LockStatus & 0x2) != 0) {
-    DEBUG ((DEBUG_ERROR, "NorFlashBlockIsLocked: WARNING: Block LOCKED DOWN\n"));
-  }
-
-  return ((LockStatus & 0x1) != 0);
-}
-
-STATIC
-EFI_STATUS
-NorFlashUnlockSingleBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  )
-{
-  UINT32  LockStatus;
-
-  // Raise the Task Priority Level to TPL_NOTIFY to serialise all its operations
-  // and to protect shared data structures.
-
-  if (FeaturePcdGet (PcdNorFlashCheckBlockLocked) == TRUE) {
-    do {
-      // Request a lock setup
-      SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
-
-      // Request an unlock
-      SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
-
-      // Send command for reading device id
-      SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
-
-      // Read block lock status
-      LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
-
-      // Decode block lock status
-      LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
-    } while ((LockStatus & 0x1) == 1);
-  } else {
-    // Request a lock setup
-    SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
-
-    // Request an unlock
-    SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
-
-    // Wait until the status register gives us the all clear
-    do {
-      LockStatus = NorFlashReadStatusRegister (Instance, BlockAddress);
-    } while ((LockStatus & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-  }
-
-  // Put device back into Read Array mode
-  SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_READ_ARRAY);
-
-  DEBUG ((DEBUG_BLKIO, "UnlockSingleBlock: BlockAddress=0x%08x\n", BlockAddress));
-
-  return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashUnlockSingleBlockIfNecessary (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  )
-{
-  EFI_STATUS  Status;
-
-  Status = EFI_SUCCESS;
-
-  if (NorFlashBlockIsLocked (Instance, BlockAddress)) {
-    Status = NorFlashUnlockSingleBlock (Instance, BlockAddress);
-  }
-
-  return Status;
-}
-
-/**
- * The following function presumes that the block has already been unlocked.
- **/
-EFI_STATUS
-NorFlashEraseSingleBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  )
-{
-  EFI_STATUS  Status;
-  UINT32      StatusRegister;
-
-  Status = EFI_SUCCESS;
-
-  // Request a block erase and then confirm it
-  SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_SETUP);
-  SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_CONFIRM);
-
-  // Wait until the status register gives us the all clear
-  do {
-    StatusRegister = NorFlashReadStatusRegister (Instance, BlockAddress);
-  } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
-  if (StatusRegister & P30_SR_BIT_VPP) {
-    DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: VPP Range Error\n", BlockAddress));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if ((StatusRegister & (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) == (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) {
-    DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Command Sequence Error\n", BlockAddress));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if (StatusRegister & P30_SR_BIT_ERASE) {
-    DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Erase Error StatusRegister:0x%X\n", BlockAddress, StatusRegister));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
-    // The debug level message has been reduced because a device lock might happen. In this case we just retry it ...
-    DEBUG ((DEBUG_INFO, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error\n", BlockAddress));
-    Status = EFI_WRITE_PROTECTED;
-  }
-
-  if (EFI_ERROR (Status)) {
-    // Clear the Status Register
-    SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
-  }
-
-  // Put device back into Read Array mode
-  SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
-  return Status;
-}
-
-EFI_STATUS
-NorFlashWriteSingleWord (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               WordAddress,
-  IN UINT32              WriteData
-  )
-{
-  EFI_STATUS  Status;
-  UINT32      StatusRegister;
-
-  Status = EFI_SUCCESS;
-
-  // Request a write single word command
-  SEND_NOR_COMMAND (WordAddress, 0, P30_CMD_WORD_PROGRAM_SETUP);
-
-  // Store the word into NOR Flash;
-  MmioWrite32 (WordAddress, WriteData);
-
-  // Wait for the write to complete and then check for any errors; i.e. check the Status Register
-  do {
-    // Prepare to read the status register
-    StatusRegister = NorFlashReadStatusRegister (Instance, WordAddress);
-    // The chip is busy while the WRITE bit is not asserted
-  } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
-  // Perform a full status check:
-  // Mask the relevant bits of Status Register.
-  // Everything should be zero, if not, we have a problem
-
-  if (StatusRegister & P30_SR_BIT_VPP) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): VPP Range Error\n", WordAddress));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if (StatusRegister & P30_SR_BIT_PROGRAM) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Program Error\n", WordAddress));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Device Protect Error\n", WordAddress));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if (!EFI_ERROR (Status)) {
-    // Clear the Status Register
-    SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
-  }
-
-  // Put device back into Read Array mode
-  SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
-  return Status;
-}
-
-/*
- * Writes data to the NOR Flash using the Buffered Programming method.
- *
- * The maximum size of the on-chip buffer is 32-words, because of hardware restrictions.
- * Therefore this function will only handle buffers up to 32 words or 128 bytes.
- * To deal with larger buffers, call this function again.
- *
- * This function presumes that both the TargetAddress and the TargetAddress+BufferSize
- * exist entirely within the NOR Flash. Therefore these conditions will not be checked here.
- *
- * In buffered programming, if the target address not at the beginning of a 32-bit word boundary,
- * then programming time is doubled and power consumption is increased.
- * Therefore, it is a requirement to align buffer writes to 32-bit word boundaries.
- * i.e. the last 4 bits of the target start address must be zero: 0x......00
- */
-EFI_STATUS
-NorFlashWriteBuffer (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               TargetAddress,
-  IN UINTN               BufferSizeInBytes,
-  IN UINT32              *Buffer
-  )
-{
-  EFI_STATUS       Status;
-  UINTN            BufferSizeInWords;
-  UINTN            Count;
-  volatile UINT32  *Data;
-  UINTN            WaitForBuffer;
-  BOOLEAN          BufferAvailable;
-  UINT32           StatusRegister;
-
-  WaitForBuffer   = MAX_BUFFERED_PROG_ITERATIONS;
-  BufferAvailable = FALSE;
-
-  // Check that the target address does not cross a 32-word boundary.
-  if ((TargetAddress & BOUNDARY_OF_32_WORDS) != 0) {
-    return EFI_INVALID_PARAMETER;
-  }
-
-  // Check there are some data to program
-  if (BufferSizeInBytes == 0) {
-    return EFI_BUFFER_TOO_SMALL;
-  }
-
-  // Check that the buffer size does not exceed the maximum hardware buffer size on chip.
-  if (BufferSizeInBytes > P30_MAX_BUFFER_SIZE_IN_BYTES) {
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // Check that the buffer size is a multiple of 32-bit words
-  if ((BufferSizeInBytes % 4) != 0) {
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // Pre-programming conditions checked, now start the algorithm.
-
-  // Prepare the data destination address
-  Data = (UINT32 *)TargetAddress;
-
-  // Check the availability of the buffer
-  do {
-    // Issue the Buffered Program Setup command
-    SEND_NOR_COMMAND (TargetAddress, 0, P30_CMD_BUFFERED_PROGRAM_SETUP);
-
-    // Read back the status register bit#7 from the same address
-    if (((*Data) & P30_SR_BIT_WRITE) == P30_SR_BIT_WRITE) {
-      BufferAvailable = TRUE;
-    }
-
-    // Update the loop counter
-    WaitForBuffer--;
-  } while ((WaitForBuffer > 0) && (BufferAvailable == FALSE));
-
-  // The buffer was not available for writing
-  if (WaitForBuffer == 0) {
-    Status = EFI_DEVICE_ERROR;
-    goto EXIT;
-  }
-
-  // From now on we work in 32-bit words
-  BufferSizeInWords = BufferSizeInBytes / (UINTN)4;
-
-  // Write the word count, which is (buffer_size_in_words - 1),
-  // because word count 0 means one word.
-  SEND_NOR_COMMAND (TargetAddress, 0, (BufferSizeInWords - 1));
-
-  // Write the data to the NOR Flash, advancing each address by 4 bytes
-  for (Count = 0; Count < BufferSizeInWords; Count++, Data++, Buffer++) {
-    MmioWrite32 ((UINTN)Data, *Buffer);
-  }
-
-  // Issue the Buffered Program Confirm command, to start the programming operation
-  SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_BUFFERED_PROGRAM_CONFIRM);
-
-  // Wait for the write to complete and then check for any errors; i.e. check the Status Register
-  do {
-    StatusRegister = NorFlashReadStatusRegister (Instance, TargetAddress);
-    // The chip is busy while the WRITE bit is not asserted
-  } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
-  // Perform a full status check:
-  // Mask the relevant bits of Status Register.
-  // Everything should be zero, if not, we have a problem
-
-  Status = EFI_SUCCESS;
-
-  if (StatusRegister & P30_SR_BIT_VPP) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): VPP Range Error\n", TargetAddress));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if (StatusRegister & P30_SR_BIT_PROGRAM) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Program Error\n", TargetAddress));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Device Protect Error\n", TargetAddress));
-    Status = EFI_DEVICE_ERROR;
-  }
-
-  if (!EFI_ERROR (Status)) {
-    // Clear the Status Register
-    SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
-  }
-
-EXIT:
-  // Put device back into Read Array mode
-  SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
-  return Status;
-}
-
-EFI_STATUS
-NorFlashWriteBlocks (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN EFI_LBA             Lba,
-  IN UINTN               BufferSizeInBytes,
-  IN VOID                *Buffer
-  )
-{
-  UINT32      *pWriteBuffer;
-  EFI_STATUS  Status;
-  EFI_LBA     CurrentBlock;
-  UINT32      BlockSizeInWords;
-  UINT32      NumBlocks;
-  UINT32      BlockCount;
-
-  Status = EFI_SUCCESS;
-
-  // The buffer must be valid
-  if (Buffer == NULL) {
-    return EFI_INVALID_PARAMETER;
-  }
-
-  if (Instance->Media.ReadOnly == TRUE) {
-    return EFI_WRITE_PROTECTED;
-  }
-
-  // We must have some bytes to read
-  DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BufferSizeInBytes=0x%x\n", BufferSizeInBytes));
-  if (BufferSizeInBytes == 0) {
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // The size of the buffer must be a multiple of the block size
-  DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BlockSize in bytes =0x%x\n", Instance->Media.BlockSize));
-  if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // All blocks must be within the device
-  NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
-
-  DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: NumBlocks=%d, LastBlock=%ld, Lba=%ld.\n", NumBlocks, Instance->Media.LastBlock, Lba));
-
-  if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteBlocks: ERROR - Write will exceed last block.\n"));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  BlockSizeInWords = Instance->Media.BlockSize / 4;
-
-  // Because the target *Buffer is a pointer to VOID, we must put all the data into a pointer
-  // to a proper data type, so use *ReadBuffer
-  pWriteBuffer = (UINT32 *)Buffer;
-
-  CurrentBlock = Lba;
-  for (BlockCount = 0; BlockCount < NumBlocks; BlockCount++, CurrentBlock++, pWriteBuffer = pWriteBuffer + BlockSizeInWords) {
-    DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Writing block #%d\n", (UINTN)CurrentBlock));
-
-    Status = NorFlashWriteFullBlock (Instance, CurrentBlock, pWriteBuffer, BlockSizeInWords);
-
-    if (EFI_ERROR (Status)) {
-      break;
-    }
-  }
-
-  DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Exit Status = \"%r\".\n", Status));
-  return Status;
-}
-
-#define BOTH_ALIGNED(a, b, align)  ((((UINTN)(a) | (UINTN)(b)) & ((align) - 1)) == 0)
-
-/**
-  Copy Length bytes from Source to Destination, using aligned accesses only.
-  Note that this implementation uses memcpy() semantics rather then memmove()
-  semantics, i.e., SourceBuffer and DestinationBuffer should not overlap.
-
-  @param  DestinationBuffer The target of the copy request.
-  @param  SourceBuffer      The place to copy from.
-  @param  Length            The number of bytes to copy.
-
-  @return Destination
-
-**/
-STATIC
-VOID *
-AlignedCopyMem (
-  OUT     VOID        *DestinationBuffer,
-  IN      CONST VOID  *SourceBuffer,
-  IN      UINTN       Length
-  )
-{
-  UINT8         *Destination8;
-  CONST UINT8   *Source8;
-  UINT32        *Destination32;
-  CONST UINT32  *Source32;
-  UINT64        *Destination64;
-  CONST UINT64  *Source64;
-
-  if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 8) && (Length >= 8)) {
-    Destination64 = DestinationBuffer;
-    Source64      = SourceBuffer;
-    while (Length >= 8) {
-      *Destination64++ = *Source64++;
-      Length          -= 8;
-    }
-
-    Destination8 = (UINT8 *)Destination64;
-    Source8      = (CONST UINT8 *)Source64;
-  } else if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 4) && (Length >= 4)) {
-    Destination32 = DestinationBuffer;
-    Source32      = SourceBuffer;
-    while (Length >= 4) {
-      *Destination32++ = *Source32++;
-      Length          -= 4;
-    }
-
-    Destination8 = (UINT8 *)Destination32;
-    Source8      = (CONST UINT8 *)Source32;
-  } else {
-    Destination8 = DestinationBuffer;
-    Source8      = SourceBuffer;
-  }
-
-  while (Length-- != 0) {
-    *Destination8++ = *Source8++;
-  }
-
-  return DestinationBuffer;
-}
-
-EFI_STATUS
-NorFlashReadBlocks (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN EFI_LBA             Lba,
-  IN UINTN               BufferSizeInBytes,
-  OUT VOID               *Buffer
-  )
-{
-  UINT32  NumBlocks;
-  UINTN   StartAddress;
-
-  DEBUG ((
-    DEBUG_BLKIO,
-    "NorFlashReadBlocks: BufferSize=0x%xB BlockSize=0x%xB LastBlock=%ld, Lba=%ld.\n",
-    BufferSizeInBytes,
-    Instance->Media.BlockSize,
-    Instance->Media.LastBlock,
-    Lba
-    ));
-
-  // The buffer must be valid
-  if (Buffer == NULL) {
-    return EFI_INVALID_PARAMETER;
-  }
-
-  // Return if we have not any byte to read
-  if (BufferSizeInBytes == 0) {
-    return EFI_SUCCESS;
-  }
-
-  // The size of the buffer must be a multiple of the block size
-  if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // All blocks must be within the device
-  NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
-
-  if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
-    DEBUG ((DEBUG_ERROR, "NorFlashReadBlocks: ERROR - Read will exceed last block\n"));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  // Get the address to start reading from
-  StartAddress = GET_NOR_BLOCK_ADDRESS (
-                   Instance->RegionBaseAddress,
-                   Lba,
-                   Instance->Media.BlockSize
-                   );
-
-  // Put the device into Read Array mode
-  SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
-  // Readout the data
-  AlignedCopyMem (Buffer, (VOID *)StartAddress, BufferSizeInBytes);
-
-  return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashRead (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN EFI_LBA             Lba,
-  IN UINTN               Offset,
-  IN UINTN               BufferSizeInBytes,
-  OUT VOID               *Buffer
-  )
-{
-  UINTN  StartAddress;
-
-  // The buffer must be valid
-  if (Buffer == NULL) {
-    return EFI_INVALID_PARAMETER;
-  }
-
-  // Return if we have not any byte to read
-  if (BufferSizeInBytes == 0) {
-    return EFI_SUCCESS;
-  }
-
-  if (((Lba * Instance->Media.BlockSize) + Offset + BufferSizeInBytes) > Instance->Size) {
-    DEBUG ((DEBUG_ERROR, "NorFlashRead: ERROR - Read will exceed device size.\n"));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  // Get the address to start reading from
-  StartAddress = GET_NOR_BLOCK_ADDRESS (
-                   Instance->RegionBaseAddress,
-                   Lba,
-                   Instance->Media.BlockSize
-                   );
-
-  // Put the device into Read Array mode
-  SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
-  // Readout the data
-  AlignedCopyMem (Buffer, (VOID *)(StartAddress + Offset), BufferSizeInBytes);
-
-  return EFI_SUCCESS;
-}
-
-/*
-  Write a full or portion of a block. It must not span block boundaries; that is,
-  Offset + *NumBytes <= Instance->Media.BlockSize.
-*/
-EFI_STATUS
-NorFlashWriteSingleBlock (
-  IN        NOR_FLASH_INSTANCE  *Instance,
-  IN        EFI_LBA             Lba,
-  IN        UINTN               Offset,
-  IN OUT    UINTN               *NumBytes,
-  IN        UINT8               *Buffer
-  )
-{
-  EFI_STATUS  TempStatus;
-  UINT32      Tmp;
-  UINT32      TmpBuf;
-  UINT32      WordToWrite;
-  UINT32      Mask;
-  BOOLEAN     DoErase;
-  UINTN       BytesToWrite;
-  UINTN       CurOffset;
-  UINTN       WordAddr;
-  UINTN       BlockSize;
-  UINTN       BlockAddress;
-  UINTN       PrevBlockAddress;
-
-  PrevBlockAddress = 0;
-
-  DEBUG ((DEBUG_BLKIO, "NorFlashWriteSingleBlock(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Lba, Offset, *NumBytes, Buffer));
-
-  // Detect WriteDisabled state
-  if (Instance->Media.ReadOnly == TRUE) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - Can not write: Device is in WriteDisabled state.\n"));
-    // It is in WriteDisabled state, return an error right away
-    return EFI_ACCESS_DENIED;
-  }
-
-  // Cache the block size to avoid de-referencing pointers all the time
-  BlockSize = Instance->Media.BlockSize;
-
-  // The write must not span block boundaries.
-  // We need to check each variable individually because adding two large values together overflows.
-  if ((Offset               >= BlockSize) ||
-      (*NumBytes            >  BlockSize) ||
-      ((Offset + *NumBytes) >  BlockSize))
-  {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // We must have some bytes to write
-  if (*NumBytes == 0) {
-    DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // Pick 128bytes as a good start for word operations as opposed to erasing the
-  // block and writing the data regardless if an erase is really needed.
-  // It looks like most individual NV variable writes are smaller than 128bytes.
-  if (*NumBytes <= 128) {
-    // Check to see if we need to erase before programming the data into NOR.
-    // If the destination bits are only changing from 1s to 0s we can just write.
-    // After a block is erased all bits in the block is set to 1.
-    // If any byte requires us to erase we just give up and rewrite all of it.
-    DoErase      = FALSE;
-    BytesToWrite = *NumBytes;
-    CurOffset    = Offset;
-
-    while (BytesToWrite > 0) {
-      // Read full word from NOR, splice as required. A word is the smallest
-      // unit we can write.
-      TempStatus = NorFlashRead (Instance, Lba, CurOffset & ~(0x3), sizeof (Tmp), &Tmp);
-      if (EFI_ERROR (TempStatus)) {
-        return EFI_DEVICE_ERROR;
-      }
-
-      // Physical address of word in NOR to write.
-      WordAddr = (CurOffset & ~(0x3)) + GET_NOR_BLOCK_ADDRESS (
-                                          Instance->RegionBaseAddress,
-                                          Lba,
-                                          BlockSize
-                                          );
-      // The word of data that is to be written.
-      TmpBuf = *((UINT32 *)(Buffer + (*NumBytes - BytesToWrite)));
-
-      // First do word aligned chunks.
-      if ((CurOffset & 0x3) == 0) {
-        if (BytesToWrite >= 4) {
-          // Is the destination still in 'erased' state?
-          if (~Tmp != 0) {
-            // Check to see if we are only changing bits to zero.
-            if ((Tmp ^ TmpBuf) & TmpBuf) {
-              DoErase = TRUE;
-              break;
-            }
-          }
-
-          // Write this word to NOR
-          WordToWrite   = TmpBuf;
-          CurOffset    += sizeof (TmpBuf);
-          BytesToWrite -= sizeof (TmpBuf);
-        } else {
-          // BytesToWrite < 4. Do small writes and left-overs
-          Mask = ~((~0) << (BytesToWrite * 8));
-          // Mask out the bytes we want.
-          TmpBuf &= Mask;
-          // Is the destination still in 'erased' state?
-          if ((Tmp & Mask) != Mask) {
-            // Check to see if we are only changing bits to zero.
-            if ((Tmp ^ TmpBuf) & TmpBuf) {
-              DoErase = TRUE;
-              break;
-            }
-          }
-
-          // Merge old and new data. Write merged word to NOR
-          WordToWrite  = (Tmp & ~Mask) | TmpBuf;
-          CurOffset   += BytesToWrite;
-          BytesToWrite = 0;
-        }
-      } else {
-        // Do multiple words, but starting unaligned.
-        if (BytesToWrite > (4 - (CurOffset & 0x3))) {
-          Mask = ((~0) << ((CurOffset & 0x3) * 8));
-          // Mask out the bytes we want.
-          TmpBuf &= Mask;
-          // Is the destination still in 'erased' state?
-          if ((Tmp & Mask) != Mask) {
-            // Check to see if we are only changing bits to zero.
-            if ((Tmp ^ TmpBuf) & TmpBuf) {
-              DoErase = TRUE;
-              break;
-            }
-          }
-
-          // Merge old and new data. Write merged word to NOR
-          WordToWrite   = (Tmp & ~Mask) | TmpBuf;
-          BytesToWrite -= (4 - (CurOffset & 0x3));
-          CurOffset    += (4 - (CurOffset & 0x3));
-        } else {
-          // Unaligned and fits in one word.
-          Mask = (~((~0) << (BytesToWrite * 8))) << ((CurOffset & 0x3) * 8);
-          // Mask out the bytes we want.
-          TmpBuf = (TmpBuf << ((CurOffset & 0x3) * 8)) & Mask;
-          // Is the destination still in 'erased' state?
-          if ((Tmp & Mask) != Mask) {
-            // Check to see if we are only changing bits to zero.
-            if ((Tmp ^ TmpBuf) & TmpBuf) {
-              DoErase = TRUE;
-              break;
-            }
-          }
-
-          // Merge old and new data. Write merged word to NOR
-          WordToWrite  = (Tmp & ~Mask) | TmpBuf;
-          CurOffset   += BytesToWrite;
-          BytesToWrite = 0;
-        }
-      }
-
-      //
-      // Write the word to NOR.
-      //
-
-      BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSize);
-      if (BlockAddress != PrevBlockAddress) {
-        TempStatus = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
-        if (EFI_ERROR (TempStatus)) {
-          return EFI_DEVICE_ERROR;
-        }
-
-        PrevBlockAddress = BlockAddress;
-      }
-
-      TempStatus = NorFlashWriteSingleWord (Instance, WordAddr, WordToWrite);
-      if (EFI_ERROR (TempStatus)) {
-        return EFI_DEVICE_ERROR;
-      }
-    }
-
-    // Exit if we got here and could write all the data. Otherwise do the
-    // Erase-Write cycle.
-    if (!DoErase) {
-      return EFI_SUCCESS;
-    }
-  }
-
-  // Check we did get some memory. Buffer is BlockSize.
-  if (Instance->ShadowBuffer == NULL) {
-    DEBUG ((DEBUG_ERROR, "FvbWrite: ERROR - Buffer not ready\n"));
-    return EFI_DEVICE_ERROR;
-  }
-
-  // Read NOR Flash data into shadow buffer
-  TempStatus = NorFlashReadBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
-  if (EFI_ERROR (TempStatus)) {
-    // Return one of the pre-approved error statuses
-    return EFI_DEVICE_ERROR;
-  }
-
-  // Put the data at the appropriate location inside the buffer area
-  CopyMem ((VOID *)((UINTN)Instance->ShadowBuffer + Offset), Buffer, *NumBytes);
-
-  // Write the modified buffer back to the NorFlash
-  TempStatus = NorFlashWriteBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
-  if (EFI_ERROR (TempStatus)) {
-    // Return one of the pre-approved error statuses
-    return EFI_DEVICE_ERROR;
-  }
-
-  return EFI_SUCCESS;
-}
-
-/*
-  Although DiskIoDxe will automatically install the DiskIO protocol whenever
-  we install the BlockIO protocol, its implementation is sub-optimal as it reads
-  and writes entire blocks using the BlockIO protocol. In fact we can access
-  NOR flash with a finer granularity than that, so we can improve performance
-  by directly producing the DiskIO protocol.
-*/
-
-/**
-  Read BufferSize bytes from Offset into Buffer.
-
-  @param  This                  Protocol instance pointer.
-  @param  MediaId               Id of the media, changes every time the media is replaced.
-  @param  Offset                The starting byte offset to read from
-  @param  BufferSize            Size of Buffer
-  @param  Buffer                Buffer containing read data
-
-  @retval EFI_SUCCESS           The data was read correctly from the device.
-  @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
-  @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
-  @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
-                                valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
-  IN EFI_DISK_IO_PROTOCOL  *This,
-  IN UINT32                MediaId,
-  IN UINT64                DiskOffset,
-  IN UINTN                 BufferSize,
-  OUT VOID                 *Buffer
-  )
-{
-  NOR_FLASH_INSTANCE  *Instance;
-  UINT32              BlockSize;
-  UINT32              BlockOffset;
-  EFI_LBA             Lba;
-
-  Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
-  if (MediaId != Instance->Media.MediaId) {
-    return EFI_MEDIA_CHANGED;
-  }
-
-  BlockSize = Instance->Media.BlockSize;
-  Lba       = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
-
-  return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer);
-}
-
-/**
-  Writes a specified number of bytes to a device.
-
-  @param  This       Indicates a pointer to the calling context.
-  @param  MediaId    ID of the medium to be written.
-  @param  Offset     The starting byte offset on the logical block I/O device to write.
-  @param  BufferSize The size in bytes of Buffer. The number of bytes to write to the device.
-  @param  Buffer     A pointer to the buffer containing the data to be written.
-
-  @retval EFI_SUCCESS           The data was written correctly to the device.
-  @retval EFI_WRITE_PROTECTED   The device can not be written to.
-  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
-  @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
-  @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not
-                                 valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
-  IN EFI_DISK_IO_PROTOCOL  *This,
-  IN UINT32                MediaId,
-  IN UINT64                DiskOffset,
-  IN UINTN                 BufferSize,
-  IN VOID                  *Buffer
-  )
-{
-  NOR_FLASH_INSTANCE  *Instance;
-  UINT32              BlockSize;
-  UINT32              BlockOffset;
-  EFI_LBA             Lba;
-  UINTN               RemainingBytes;
-  UINTN               WriteSize;
-  EFI_STATUS          Status;
-
-  Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
-  if (MediaId != Instance->Media.MediaId) {
-    return EFI_MEDIA_CHANGED;
-  }
-
-  BlockSize = Instance->Media.BlockSize;
-  Lba       = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
-
-  RemainingBytes = BufferSize;
-
-  // Write either all the remaining bytes, or the number of bytes that bring
-  // us up to a block boundary, whichever is less.
-  // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next
-  // block boundary (even if it is already on one).
-  WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) - DiskOffset);
-
-  do {
-    if (WriteSize == BlockSize) {
-      // Write a full block
-      Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize / sizeof (UINT32));
-    } else {
-      // Write a partial block
-      Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset, &WriteSize, Buffer);
-    }
-
-    if (EFI_ERROR (Status)) {
-      return Status;
-    }
-
-    // Now continue writing either all the remaining bytes or single blocks.
-    RemainingBytes -= WriteSize;
-    Buffer          = (UINT8 *)Buffer + WriteSize;
-    Lba++;
-    BlockOffset = 0;
-    WriteSize   = MIN (RemainingBytes, BlockSize);
-  } while (RemainingBytes);
-
-  return Status;
-}
-
-EFI_STATUS
-NorFlashReset (
-  IN  NOR_FLASH_INSTANCE  *Instance
-  )
-{
-  // As there is no specific RESET to perform, ensure that the devices is in the default Read Array mode
-  SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-  return EFI_SUCCESS;
-}
-
-/**
-  Fixup internal data so that EFI can be call in virtual mode.
-  Call the passed in Child Notify event and convert any pointers in
-  lib to virtual mode.
-
-  @param[in]    Event   The Event that is being processed
-  @param[in]    Context Event Context
-**/
-VOID
-EFIAPI
-NorFlashVirtualNotifyEvent (
-  IN EFI_EVENT  Event,
-  IN VOID       *Context
-  )
-{
-  UINTN  Index;
-
-  for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->DeviceBaseAddress);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->RegionBaseAddress);
-
-    // Convert BlockIo protocol
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.FlushBlocks);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.ReadBlocks);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.Reset);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.WriteBlocks);
-
-    // Convert Fvb
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.EraseBlocks);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetAttributes);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetBlockSize);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetPhysicalAddress);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Read);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.SetAttributes);
-    EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Write);
-
-    if (mNorFlashInstances[Index]->ShadowBuffer != NULL) {
-      EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->ShadowBuffer);
-    }
-  }
-
-  return;
-}

+ 0 - 422
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h

@@ -1,422 +0,0 @@
-/** @file  NorFlash.h
-
-  Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.<BR>
-
-  SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __NOR_FLASH_H__
-#define __NOR_FLASH_H__
-
-#include <Base.h>
-#include <PiDxe.h>
-
-#include <Guid/EventGroup.h>
-
-#include <Protocol/BlockIo.h>
-#include <Protocol/DiskIo.h>
-#include <Protocol/FirmwareVolumeBlock.h>
-
-#include <Library/DebugLib.h>
-#include <Library/IoLib.h>
-#include <Library/NorFlashPlatformLib.h>
-#include <Library/UefiLib.h>
-#include <Library/UefiRuntimeLib.h>
-
-#define NOR_FLASH_ERASE_RETRY  10
-
-// Device access macros
-// These are necessary because we use 2 x 16bit parts to make up 32bit data
-
-#define HIGH_16_BITS  0xFFFF0000
-#define LOW_16_BITS   0x0000FFFF
-#define LOW_8_BITS    0x000000FF
-
-#define FOLD_32BIT_INTO_16BIT(value)  ( ( value >> 16 ) | ( value & LOW_16_BITS ) )
-
-#define GET_LOW_BYTE(value)   ( value & LOW_8_BITS )
-#define GET_HIGH_BYTE(value)  ( GET_LOW_BYTE( value >> 16 ) )
-
-// Each command must be sent simultaneously to both chips,
-// i.e. at the lower 16 bits AND at the higher 16 bits
-#define CREATE_NOR_ADDRESS(BaseAddr, OffsetAddr)       ((BaseAddr) + ((OffsetAddr) << 2))
-#define CREATE_DUAL_CMD(Cmd)                           ( ( Cmd << 16) | ( Cmd & LOW_16_BITS) )
-#define SEND_NOR_COMMAND(BaseAddr, Offset, Cmd)        MmioWrite32 (CREATE_NOR_ADDRESS(BaseAddr,Offset), CREATE_DUAL_CMD(Cmd))
-#define GET_NOR_BLOCK_ADDRESS(BaseAddr, Lba, LbaSize)  ( BaseAddr + (UINTN)((Lba) * LbaSize) )
-
-// Status Register Bits
-#define P30_SR_BIT_WRITE            (BIT7 << 16 | BIT7)
-#define P30_SR_BIT_ERASE_SUSPEND    (BIT6 << 16 | BIT6)
-#define P30_SR_BIT_ERASE            (BIT5 << 16 | BIT5)
-#define P30_SR_BIT_PROGRAM          (BIT4 << 16 | BIT4)
-#define P30_SR_BIT_VPP              (BIT3 << 16 | BIT3)
-#define P30_SR_BIT_PROGRAM_SUSPEND  (BIT2 << 16 | BIT2)
-#define P30_SR_BIT_BLOCK_LOCKED     (BIT1 << 16 | BIT1)
-#define P30_SR_BIT_BEFP             (BIT0 << 16 | BIT0)
-
-// Device Commands for Intel StrataFlash(R) Embedded Memory (P30) Family
-
-// On chip buffer size for buffered programming operations
-// There are 2 chips, each chip can buffer up to 32 (16-bit)words, and each word is 2 bytes.
-// Therefore the total size of the buffer is 2 x 32 x 2 = 128 bytes
-#define P30_MAX_BUFFER_SIZE_IN_BYTES  ((UINTN)128)
-#define P30_MAX_BUFFER_SIZE_IN_WORDS  (P30_MAX_BUFFER_SIZE_IN_BYTES/((UINTN)4))
-#define MAX_BUFFERED_PROG_ITERATIONS  10000000
-#define BOUNDARY_OF_32_WORDS          0x7F
-
-// CFI Addresses
-#define P30_CFI_ADDR_QUERY_UNIQUE_QRY  0x10
-#define P30_CFI_ADDR_VENDOR_ID         0x13
-
-// CFI Data
-#define CFI_QRY  0x00595251
-
-// READ Commands
-#define P30_CMD_READ_DEVICE_ID         0x0090
-#define P30_CMD_READ_STATUS_REGISTER   0x0070
-#define P30_CMD_CLEAR_STATUS_REGISTER  0x0050
-#define P30_CMD_READ_ARRAY             0x00FF
-#define P30_CMD_READ_CFI_QUERY         0x0098
-
-// WRITE Commands
-#define P30_CMD_WORD_PROGRAM_SETUP            0x0040
-#define P30_CMD_ALTERNATE_WORD_PROGRAM_SETUP  0x0010
-#define P30_CMD_BUFFERED_PROGRAM_SETUP        0x00E8
-#define P30_CMD_BUFFERED_PROGRAM_CONFIRM      0x00D0
-#define P30_CMD_BEFP_SETUP                    0x0080
-#define P30_CMD_BEFP_CONFIRM                  0x00D0
-
-// ERASE Commands
-#define P30_CMD_BLOCK_ERASE_SETUP    0x0020
-#define P30_CMD_BLOCK_ERASE_CONFIRM  0x00D0
-
-// SUSPEND Commands
-#define P30_CMD_PROGRAM_OR_ERASE_SUSPEND  0x00B0
-#define P30_CMD_SUSPEND_RESUME            0x00D0
-
-// BLOCK LOCKING / UNLOCKING Commands
-#define P30_CMD_LOCK_BLOCK_SETUP  0x0060
-#define P30_CMD_LOCK_BLOCK        0x0001
-#define P30_CMD_UNLOCK_BLOCK      0x00D0
-#define P30_CMD_LOCK_DOWN_BLOCK   0x002F
-
-// PROTECTION Commands
-#define P30_CMD_PROGRAM_PROTECTION_REGISTER_SETUP  0x00C0
-
-// CONFIGURATION Commands
-#define P30_CMD_READ_CONFIGURATION_REGISTER_SETUP  0x0060
-#define P30_CMD_READ_CONFIGURATION_REGISTER        0x0003
-
-#define NOR_FLASH_SIGNATURE  SIGNATURE_32('n', 'o', 'r', '0')
-#define INSTANCE_FROM_FVB_THIS(a)     CR(a, NOR_FLASH_INSTANCE, FvbProtocol, NOR_FLASH_SIGNATURE)
-#define INSTANCE_FROM_BLKIO_THIS(a)   CR(a, NOR_FLASH_INSTANCE, BlockIoProtocol, NOR_FLASH_SIGNATURE)
-#define INSTANCE_FROM_DISKIO_THIS(a)  CR(a, NOR_FLASH_INSTANCE, DiskIoProtocol, NOR_FLASH_SIGNATURE)
-
-typedef struct _NOR_FLASH_INSTANCE NOR_FLASH_INSTANCE;
-
-#pragma pack (1)
-typedef struct {
-  VENDOR_DEVICE_PATH          Vendor;
-  UINT8                       Index;
-  EFI_DEVICE_PATH_PROTOCOL    End;
-} NOR_FLASH_DEVICE_PATH;
-#pragma pack ()
-
-struct _NOR_FLASH_INSTANCE {
-  UINT32                                 Signature;
-  EFI_HANDLE                             Handle;
-
-  UINTN                                  DeviceBaseAddress;
-  UINTN                                  RegionBaseAddress;
-  UINTN                                  Size;
-  EFI_LBA                                StartLba;
-
-  EFI_BLOCK_IO_PROTOCOL                  BlockIoProtocol;
-  EFI_BLOCK_IO_MEDIA                     Media;
-  EFI_DISK_IO_PROTOCOL                   DiskIoProtocol;
-
-  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL    FvbProtocol;
-  VOID                                   *ShadowBuffer;
-
-  NOR_FLASH_DEVICE_PATH                  DevicePath;
-};
-
-EFI_STATUS
-NorFlashReadCfiData (
-  IN  UINTN   DeviceBaseAddress,
-  IN  UINTN   CFI_Offset,
-  IN  UINT32  NumberOfBytes,
-  OUT UINT32  *Data
-  );
-
-EFI_STATUS
-NorFlashWriteBuffer (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               TargetAddress,
-  IN UINTN               BufferSizeInBytes,
-  IN UINT32              *Buffer
-  );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReset (
-  IN EFI_BLOCK_IO_PROTOCOL  *This,
-  IN BOOLEAN                ExtendedVerification
-  );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReadBlocks (
-  IN  EFI_BLOCK_IO_PROTOCOL  *This,
-  IN  UINT32                 MediaId,
-  IN  EFI_LBA                Lba,
-  IN  UINTN                  BufferSizeInBytes,
-  OUT VOID                   *Buffer
-  );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoWriteBlocks (
-  IN  EFI_BLOCK_IO_PROTOCOL  *This,
-  IN  UINT32                 MediaId,
-  IN  EFI_LBA                Lba,
-  IN  UINTN                  BufferSizeInBytes,
-  IN  VOID                   *Buffer
-  );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoFlushBlocks (
-  IN EFI_BLOCK_IO_PROTOCOL  *This
-  );
-
-//
-// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.ReadDisk
-//
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
-  IN EFI_DISK_IO_PROTOCOL  *This,
-  IN UINT32                MediaId,
-  IN UINT64                Offset,
-  IN UINTN                 BufferSize,
-  OUT VOID                 *Buffer
-  );
-
-//
-// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.WriteDisk
-//
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
-  IN EFI_DISK_IO_PROTOCOL  *This,
-  IN UINT32                MediaId,
-  IN UINT64                Offset,
-  IN UINTN                 BufferSize,
-  IN VOID                  *Buffer
-  );
-
-//
-// NorFlashFvbDxe.c
-//
-
-EFI_STATUS
-EFIAPI
-FvbGetAttributes (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  OUT       EFI_FVB_ATTRIBUTES_2                 *Attributes
-  );
-
-EFI_STATUS
-EFIAPI
-FvbSetAttributes (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  IN OUT    EFI_FVB_ATTRIBUTES_2                 *Attributes
-  );
-
-EFI_STATUS
-EFIAPI
-FvbGetPhysicalAddress (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  OUT       EFI_PHYSICAL_ADDRESS                 *Address
-  );
-
-EFI_STATUS
-EFIAPI
-FvbGetBlockSize (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  IN        EFI_LBA                              Lba,
-  OUT       UINTN                                *BlockSize,
-  OUT       UINTN                                *NumberOfBlocks
-  );
-
-EFI_STATUS
-EFIAPI
-FvbRead (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  IN        EFI_LBA                              Lba,
-  IN        UINTN                                Offset,
-  IN OUT    UINTN                                *NumBytes,
-  IN OUT    UINT8                                *Buffer
-  );
-
-EFI_STATUS
-EFIAPI
-FvbWrite (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  IN        EFI_LBA                              Lba,
-  IN        UINTN                                Offset,
-  IN OUT    UINTN                                *NumBytes,
-  IN        UINT8                                *Buffer
-  );
-
-EFI_STATUS
-EFIAPI
-FvbEraseBlocks (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  ...
-  );
-
-EFI_STATUS
-ValidateFvHeader (
-  IN  NOR_FLASH_INSTANCE  *Instance
-  );
-
-EFI_STATUS
-InitializeFvAndVariableStoreHeaders (
-  IN NOR_FLASH_INSTANCE  *Instance
-  );
-
-VOID
-EFIAPI
-FvbVirtualNotifyEvent (
-  IN EFI_EVENT  Event,
-  IN VOID       *Context
-  );
-
-//
-// NorFlashDxe.c
-//
-
-EFI_STATUS
-NorFlashWriteFullBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN EFI_LBA             Lba,
-  IN UINT32              *DataBuffer,
-  IN UINT32              BlockSizeInWords
-  );
-
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  );
-
-EFI_STATUS
-NorFlashCreateInstance (
-  IN UINTN                NorFlashDeviceBase,
-  IN UINTN                NorFlashRegionBase,
-  IN UINTN                NorFlashSize,
-  IN UINT32               Index,
-  IN UINT32               BlockSize,
-  IN BOOLEAN              SupportFvb,
-  OUT NOR_FLASH_INSTANCE  **NorFlashInstance
-  );
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
-  IN NOR_FLASH_INSTANCE  *Instance
-  );
-
-//
-// NorFlash.c
-//
-EFI_STATUS
-NorFlashWriteSingleBlock (
-  IN        NOR_FLASH_INSTANCE  *Instance,
-  IN        EFI_LBA             Lba,
-  IN        UINTN               Offset,
-  IN OUT    UINTN               *NumBytes,
-  IN        UINT8               *Buffer
-  );
-
-EFI_STATUS
-NorFlashWriteBlocks (
-  IN  NOR_FLASH_INSTANCE  *Instance,
-  IN  EFI_LBA             Lba,
-  IN  UINTN               BufferSizeInBytes,
-  IN  VOID                *Buffer
-  );
-
-EFI_STATUS
-NorFlashReadBlocks (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN EFI_LBA             Lba,
-  IN UINTN               BufferSizeInBytes,
-  OUT VOID               *Buffer
-  );
-
-EFI_STATUS
-NorFlashRead (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN EFI_LBA             Lba,
-  IN UINTN               Offset,
-  IN UINTN               BufferSizeInBytes,
-  OUT VOID               *Buffer
-  );
-
-EFI_STATUS
-NorFlashWrite (
-  IN        NOR_FLASH_INSTANCE  *Instance,
-  IN        EFI_LBA             Lba,
-  IN        UINTN               Offset,
-  IN OUT    UINTN               *NumBytes,
-  IN        UINT8               *Buffer
-  );
-
-EFI_STATUS
-NorFlashReset (
-  IN  NOR_FLASH_INSTANCE  *Instance
-  );
-
-EFI_STATUS
-NorFlashEraseSingleBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  );
-
-EFI_STATUS
-NorFlashUnlockSingleBlockIfNecessary (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  );
-
-EFI_STATUS
-NorFlashWriteSingleWord (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               WordAddress,
-  IN UINT32              WriteData
-  );
-
-VOID
-EFIAPI
-NorFlashVirtualNotifyEvent (
-  IN EFI_EVENT  Event,
-  IN VOID       *Context
-  );
-
-#endif /* __NOR_FLASH_H__ */

+ 0 - 123
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c

@@ -1,123 +0,0 @@
-/** @file  NorFlashBlockIoDxe.c
-
-  Copyright (c) 2011-2013, ARM Ltd. All rights reserved.<BR>
-
-  SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-
-#include "NorFlash.h"
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReset (
-  IN EFI_BLOCK_IO_PROTOCOL  *This,
-  IN BOOLEAN                ExtendedVerification
-  )
-{
-  NOR_FLASH_INSTANCE  *Instance;
-
-  Instance = INSTANCE_FROM_BLKIO_THIS (This);
-
-  DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReset(MediaId=0x%x)\n", This->Media->MediaId));
-
-  return NorFlashReset (Instance);
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReadBlocks (
-  IN  EFI_BLOCK_IO_PROTOCOL  *This,
-  IN  UINT32                 MediaId,
-  IN  EFI_LBA                Lba,
-  IN  UINTN                  BufferSizeInBytes,
-  OUT VOID                   *Buffer
-  )
-{
-  NOR_FLASH_INSTANCE  *Instance;
-  EFI_STATUS          Status;
-  EFI_BLOCK_IO_MEDIA  *Media;
-
-  if (This == NULL) {
-    return EFI_INVALID_PARAMETER;
-  }
-
-  Instance = INSTANCE_FROM_BLKIO_THIS (This);
-  Media    = This->Media;
-
-  DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReadBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes (%d kB), BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, BufferSizeInBytes, Buffer));
-
-  if (!Media) {
-    Status = EFI_INVALID_PARAMETER;
-  } else if (!Media->MediaPresent) {
-    Status = EFI_NO_MEDIA;
-  } else if (Media->MediaId != MediaId) {
-    Status = EFI_MEDIA_CHANGED;
-  } else if ((Media->IoAlign > 2) && (((UINTN)Buffer & (Media->IoAlign - 1)) != 0)) {
-    Status = EFI_INVALID_PARAMETER;
-  } else {
-    Status = NorFlashReadBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
-  }
-
-  return Status;
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoWriteBlocks (
-  IN  EFI_BLOCK_IO_PROTOCOL  *This,
-  IN  UINT32                 MediaId,
-  IN  EFI_LBA                Lba,
-  IN  UINTN                  BufferSizeInBytes,
-  IN  VOID                   *Buffer
-  )
-{
-  NOR_FLASH_INSTANCE  *Instance;
-  EFI_STATUS          Status;
-
-  Instance = INSTANCE_FROM_BLKIO_THIS (This);
-
-  DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes, BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, Buffer));
-
-  if ( !This->Media->MediaPresent ) {
-    Status = EFI_NO_MEDIA;
-  } else if ( This->Media->MediaId != MediaId ) {
-    Status = EFI_MEDIA_CHANGED;
-  } else if ( This->Media->ReadOnly ) {
-    Status = EFI_WRITE_PROTECTED;
-  } else {
-    Status = NorFlashWriteBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
-  }
-
-  return Status;
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoFlushBlocks (
-  IN EFI_BLOCK_IO_PROTOCOL  *This
-  )
-{
-  // No Flush required for the NOR Flash driver
-  // because cache operations are not permitted.
-
-  DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoFlushBlocks: Function NOT IMPLEMENTED (not required).\n"));
-
-  // Nothing to do so just return without error
-  return EFI_SUCCESS;
-}

+ 0 - 506
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c

@@ -1,506 +0,0 @@
-/** @file  NorFlashDxe.c
-
-  Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-
-  SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/UefiLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/PcdLib.h>
-#include <Library/HobLib.h>
-#include <Library/DxeServicesTableLib.h>
-
-#include "NorFlash.h"
-
-STATIC EFI_EVENT  mNorFlashVirtualAddrChangeEvent;
-
-//
-// Global variable declarations
-//
-NOR_FLASH_INSTANCE  **mNorFlashInstances;
-UINT32              mNorFlashDeviceCount;
-UINTN               mFlashNvStorageVariableBase;
-EFI_EVENT           mFvbVirtualAddrChangeEvent;
-
-NOR_FLASH_INSTANCE  mNorFlashInstanceTemplate = {
-  NOR_FLASH_SIGNATURE, // Signature
-  NULL,                // Handle ... NEED TO BE FILLED
-
-  0, // DeviceBaseAddress ... NEED TO BE FILLED
-  0, // RegionBaseAddress ... NEED TO BE FILLED
-  0, // Size ... NEED TO BE FILLED
-  0, // StartLba
-
-  {
-    EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
-    NULL,                            // Media ... NEED TO BE FILLED
-    NorFlashBlockIoReset,            // Reset;
-    NorFlashBlockIoReadBlocks,       // ReadBlocks
-    NorFlashBlockIoWriteBlocks,      // WriteBlocks
-    NorFlashBlockIoFlushBlocks       // FlushBlocks
-  }, // BlockIoProtocol
-
-  {
-    0,     // MediaId ... NEED TO BE FILLED
-    FALSE, // RemovableMedia
-    TRUE,  // MediaPresent
-    FALSE, // LogicalPartition
-    FALSE, // ReadOnly
-    FALSE, // WriteCaching;
-    0,     // BlockSize ... NEED TO BE FILLED
-    4,     //  IoAlign
-    0,     // LastBlock ... NEED TO BE FILLED
-    0,     // LowestAlignedLba
-    1,     // LogicalBlocksPerPhysicalBlock
-  }, // Media;
-
-  {
-    EFI_DISK_IO_PROTOCOL_REVISION, // Revision
-    NorFlashDiskIoReadDisk,        // ReadDisk
-    NorFlashDiskIoWriteDisk        // WriteDisk
-  },
-
-  {
-    FvbGetAttributes,      // GetAttributes
-    FvbSetAttributes,      // SetAttributes
-    FvbGetPhysicalAddress, // GetPhysicalAddress
-    FvbGetBlockSize,       // GetBlockSize
-    FvbRead,               // Read
-    FvbWrite,              // Write
-    FvbEraseBlocks,        // EraseBlocks
-    NULL,                  // ParentHandle
-  },    //  FvbProtoccol;
-  NULL, // ShadowBuffer
-  {
-    {
-      {
-        HARDWARE_DEVICE_PATH,
-        HW_VENDOR_DP,
-        {
-          (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
-          (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
-        }
-      },
-      { 0x0,                               0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
-      },                                                             // GUID ... NEED TO BE FILLED
-    },
-    0, // Index
-    {
-      END_DEVICE_PATH_TYPE,
-      END_ENTIRE_DEVICE_PATH_SUBTYPE,
-      { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
-    }
-  }   // DevicePath
-};
-
-EFI_STATUS
-NorFlashCreateInstance (
-  IN UINTN                NorFlashDeviceBase,
-  IN UINTN                NorFlashRegionBase,
-  IN UINTN                NorFlashSize,
-  IN UINT32               Index,
-  IN UINT32               BlockSize,
-  IN BOOLEAN              SupportFvb,
-  OUT NOR_FLASH_INSTANCE  **NorFlashInstance
-  )
-{
-  EFI_STATUS          Status;
-  NOR_FLASH_INSTANCE  *Instance;
-
-  ASSERT (NorFlashInstance != NULL);
-
-  Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
-  if (Instance == NULL) {
-    return EFI_OUT_OF_RESOURCES;
-  }
-
-  Instance->DeviceBaseAddress = NorFlashDeviceBase;
-  Instance->RegionBaseAddress = NorFlashRegionBase;
-  Instance->Size              = NorFlashSize;
-
-  Instance->BlockIoProtocol.Media = &Instance->Media;
-  Instance->Media.MediaId         = Index;
-  Instance->Media.BlockSize       = BlockSize;
-  Instance->Media.LastBlock       = (NorFlashSize / BlockSize)-1;
-
-  CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
-  Instance->DevicePath.Index = (UINT8)Index;
-
-  Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
-  if (Instance->ShadowBuffer == NULL) {
-    return EFI_OUT_OF_RESOURCES;
-  }
-
-  if (SupportFvb) {
-    NorFlashFvbInitialize (Instance);
-
-    Status = gBS->InstallMultipleProtocolInterfaces (
-                    &Instance->Handle,
-                    &gEfiDevicePathProtocolGuid,
-                    &Instance->DevicePath,
-                    &gEfiBlockIoProtocolGuid,
-                    &Instance->BlockIoProtocol,
-                    &gEfiFirmwareVolumeBlockProtocolGuid,
-                    &Instance->FvbProtocol,
-                    NULL
-                    );
-    if (EFI_ERROR (Status)) {
-      FreePool (Instance);
-      return Status;
-    }
-  } else {
-    Status = gBS->InstallMultipleProtocolInterfaces (
-                    &Instance->Handle,
-                    &gEfiDevicePathProtocolGuid,
-                    &Instance->DevicePath,
-                    &gEfiBlockIoProtocolGuid,
-                    &Instance->BlockIoProtocol,
-                    &gEfiDiskIoProtocolGuid,
-                    &Instance->DiskIoProtocol,
-                    NULL
-                    );
-    if (EFI_ERROR (Status)) {
-      FreePool (Instance);
-      return Status;
-    }
-  }
-
-  *NorFlashInstance = Instance;
-  return Status;
-}
-
-/**
- * This function unlock and erase an entire NOR Flash block.
- **/
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  )
-{
-  EFI_STATUS  Status;
-  UINTN       Index;
-  EFI_TPL     OriginalTPL;
-
-  if (!EfiAtRuntime ()) {
-    // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
-    OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
-  } else {
-    // This initialization is only to prevent the compiler to complain about the
-    // use of uninitialized variables
-    OriginalTPL = TPL_HIGH_LEVEL;
-  }
-
-  Index = 0;
-  // The block erase might fail a first time (SW bug ?). Retry it ...
-  do {
-    // Unlock the block if we have to
-    Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
-    if (EFI_ERROR (Status)) {
-      break;
-    }
-
-    Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
-    Index++;
-  } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
-
-  if (Index == NOR_FLASH_ERASE_RETRY) {
-    DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
-  }
-
-  if (!EfiAtRuntime ()) {
-    // Interruptions can resume.
-    gBS->RestoreTPL (OriginalTPL);
-  }
-
-  return Status;
-}
-
-EFI_STATUS
-NorFlashWriteFullBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN EFI_LBA             Lba,
-  IN UINT32              *DataBuffer,
-  IN UINT32              BlockSizeInWords
-  )
-{
-  EFI_STATUS  Status;
-  UINTN       WordAddress;
-  UINT32      WordIndex;
-  UINTN       BufferIndex;
-  UINTN       BlockAddress;
-  UINTN       BuffersInBlock;
-  UINTN       RemainingWords;
-  EFI_TPL     OriginalTPL;
-  UINTN       Cnt;
-
-  Status = EFI_SUCCESS;
-
-  // Get the physical address of the block
-  BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
-
-  // Start writing from the first address at the start of the block
-  WordAddress = BlockAddress;
-
-  if (!EfiAtRuntime ()) {
-    // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
-    OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
-  } else {
-    // This initialization is only to prevent the compiler to complain about the
-    // use of uninitialized variables
-    OriginalTPL = TPL_HIGH_LEVEL;
-  }
-
-  Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
-  if (EFI_ERROR (Status)) {
-    DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
-    goto EXIT;
-  }
-
-  // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
-
-  // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
-  if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
-    // First, break the entire block into buffer-sized chunks.
-    BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
-
-    // Then feed each buffer chunk to the NOR Flash
-    // If a buffer does not contain any data, don't write it.
-    for (BufferIndex = 0;
-         BufferIndex < BuffersInBlock;
-         BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
-         )
-    {
-      // Check the buffer to see if it contains any data (not set all 1s).
-      for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
-        if (~DataBuffer[Cnt] != 0 ) {
-          // Some data found, write the buffer.
-          Status = NorFlashWriteBuffer (
-                     Instance,
-                     WordAddress,
-                     P30_MAX_BUFFER_SIZE_IN_BYTES,
-                     DataBuffer
-                     );
-          if (EFI_ERROR (Status)) {
-            goto EXIT;
-          }
-
-          break;
-        }
-      }
-    }
-
-    // Finally, finish off any remaining words that are less than the maximum size of the buffer
-    RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
-
-    if (RemainingWords != 0) {
-      Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
-      if (EFI_ERROR (Status)) {
-        goto EXIT;
-      }
-    }
-  } else {
-    // For now, use the single word programming algorithm
-    // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
-    // i.e. which ends in the range 0x......01 - 0x......7F.
-    for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
-      Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
-      if (EFI_ERROR (Status)) {
-        goto EXIT;
-      }
-    }
-  }
-
-EXIT:
-  if (!EfiAtRuntime ()) {
-    // Interruptions can resume.
-    gBS->RestoreTPL (OriginalTPL);
-  }
-
-  if (EFI_ERROR (Status)) {
-    DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
-  }
-
-  return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashInitialise (
-  IN EFI_HANDLE        ImageHandle,
-  IN EFI_SYSTEM_TABLE  *SystemTable
-  )
-{
-  EFI_STATUS             Status;
-  UINT32                 Index;
-  NOR_FLASH_DESCRIPTION  *NorFlashDevices;
-  BOOLEAN                ContainVariableStorage;
-
-  Status = NorFlashPlatformInitialization ();
-  if (EFI_ERROR (Status)) {
-    DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
-    return Status;
-  }
-
-  Status = NorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
-  if (EFI_ERROR (Status)) {
-    DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
-    return Status;
-  }
-
-  mNorFlashInstances = AllocateRuntimePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
-
-  for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
-    // Check if this NOR Flash device contain the variable storage region
-
-    if (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
-      ContainVariableStorage =
-        (NorFlashDevices[Index].RegionBaseAddress <= PcdGet64 (PcdFlashNvStorageVariableBase64)) &&
-        (PcdGet64 (PcdFlashNvStorageVariableBase64) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
-         NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
-    } else {
-      ContainVariableStorage =
-        (NorFlashDevices[Index].RegionBaseAddress <= PcdGet32 (PcdFlashNvStorageVariableBase)) &&
-        (PcdGet32 (PcdFlashNvStorageVariableBase) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
-         NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
-    }
-
-    Status = NorFlashCreateInstance (
-               NorFlashDevices[Index].DeviceBaseAddress,
-               NorFlashDevices[Index].RegionBaseAddress,
-               NorFlashDevices[Index].Size,
-               Index,
-               NorFlashDevices[Index].BlockSize,
-               ContainVariableStorage,
-               &mNorFlashInstances[Index]
-               );
-    if (EFI_ERROR (Status)) {
-      DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
-    }
-  }
-
-  //
-  // Register for the virtual address change event
-  //
-  Status = gBS->CreateEventEx (
-                  EVT_NOTIFY_SIGNAL,
-                  TPL_NOTIFY,
-                  NorFlashVirtualNotifyEvent,
-                  NULL,
-                  &gEfiEventVirtualAddressChangeGuid,
-                  &mNorFlashVirtualAddrChangeEvent
-                  );
-  ASSERT_EFI_ERROR (Status);
-
-  return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
-  IN NOR_FLASH_INSTANCE  *Instance
-  )
-{
-  EFI_STATUS     Status;
-  UINT32         FvbNumLba;
-  EFI_BOOT_MODE  BootMode;
-  UINTN          RuntimeMmioRegionSize;
-
-  DEBUG ((DEBUG_BLKIO, "NorFlashFvbInitialize\n"));
-  ASSERT ((Instance != NULL));
-
-  //
-  // Declare the Non-Volatile storage as EFI_MEMORY_RUNTIME
-  //
-
-  // Note: all the NOR Flash region needs to be reserved into the UEFI Runtime memory;
-  //       even if we only use the small block region at the top of the NOR Flash.
-  //       The reason is when the NOR Flash memory is set into program mode, the command
-  //       is written as the base of the flash region (ie: Instance->DeviceBaseAddress)
-  RuntimeMmioRegionSize = (Instance->RegionBaseAddress - Instance->DeviceBaseAddress) + Instance->Size;
-
-  Status = gDS->AddMemorySpace (
-                  EfiGcdMemoryTypeMemoryMappedIo,
-                  Instance->DeviceBaseAddress,
-                  RuntimeMmioRegionSize,
-                  EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
-                  );
-  ASSERT_EFI_ERROR (Status);
-
-  Status = gDS->SetMemorySpaceAttributes (
-                  Instance->DeviceBaseAddress,
-                  RuntimeMmioRegionSize,
-                  EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
-                  );
-  ASSERT_EFI_ERROR (Status);
-
-  mFlashNvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
-                                PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
-
-  // Set the index of the first LBA for the FVB
-  Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
-
-  BootMode = GetBootModeHob ();
-  if (BootMode == BOOT_WITH_DEFAULT_SETTINGS) {
-    Status = EFI_INVALID_PARAMETER;
-  } else {
-    // Determine if there is a valid header at the beginning of the NorFlash
-    Status = ValidateFvHeader (Instance);
-  }
-
-  // Install the Default FVB header if required
-  if (EFI_ERROR (Status)) {
-    // There is no valid header, so time to install one.
-    DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
-    DEBUG ((
-      DEBUG_INFO,
-      "%a: Installing a correct one for this volume.\n",
-      __FUNCTION__
-      ));
-
-    // Erase all the NorFlash that is reserved for variable storage
-    FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
-
-    Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
-    if (EFI_ERROR (Status)) {
-      return Status;
-    }
-
-    // Install all appropriate headers
-    Status = InitializeFvAndVariableStoreHeaders (Instance);
-    if (EFI_ERROR (Status)) {
-      return Status;
-    }
-  }
-
-  //
-  // The driver implementing the variable read service can now be dispatched;
-  // the varstore headers are in place.
-  //
-  Status = gBS->InstallProtocolInterface (
-                  &gImageHandle,
-                  &gEdkiiNvVarStoreFormattedGuid,
-                  EFI_NATIVE_INTERFACE,
-                  NULL
-                  );
-  ASSERT_EFI_ERROR (Status);
-
-  //
-  // Register for the virtual address change event
-  //
-  Status = gBS->CreateEventEx (
-                  EVT_NOTIFY_SIGNAL,
-                  TPL_NOTIFY,
-                  FvbVirtualNotifyEvent,
-                  NULL,
-                  &gEfiEventVirtualAddressChangeGuid,
-                  &mFvbVirtualAddrChangeEvent
-                  );
-  ASSERT_EFI_ERROR (Status);
-
-  return Status;
-}

+ 0 - 71
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf

@@ -1,71 +0,0 @@
-#/** @file
-#
-#  Component description file for NorFlashDxe module
-#
-#  Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-#
-#  SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
-  INF_VERSION                    = 0x00010005
-  BASE_NAME                      = ArmVeNorFlashDxe
-  FILE_GUID                      = 93E34C7E-B50E-11DF-9223-2443DFD72085
-  MODULE_TYPE                    = DXE_RUNTIME_DRIVER
-  VERSION_STRING                 = 1.0
-  ENTRY_POINT                    = NorFlashInitialise
-
-[Sources.common]
-  NorFlash.c
-  NorFlash.h
-  NorFlashDxe.c
-  NorFlashFvb.c
-  NorFlashBlockIoDxe.c
-
-[Packages]
-  MdePkg/MdePkg.dec
-  MdeModulePkg/MdeModulePkg.dec
-  ArmPlatformPkg/ArmPlatformPkg.dec
-  EmbeddedPkg/EmbeddedPkg.dec
-
-[LibraryClasses]
-  IoLib
-  BaseLib
-  DebugLib
-  HobLib
-  NorFlashPlatformLib
-  UefiLib
-  UefiDriverEntryPoint
-  UefiBootServicesTableLib
-  UefiRuntimeLib
-  DxeServicesTableLib
-
-[Guids]
-  gEfiSystemNvDataFvGuid
-  gEfiVariableGuid
-  gEfiAuthenticatedVariableGuid
-  gEfiEventVirtualAddressChangeGuid
-  gEdkiiNvVarStoreFormattedGuid     ## PRODUCES ## PROTOCOL
-
-[Protocols]
-  gEfiBlockIoProtocolGuid
-  gEfiDevicePathProtocolGuid
-  gEfiFirmwareVolumeBlockProtocolGuid
-  gEfiDiskIoProtocolGuid
-
-[Pcd.common]
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
-
-  gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
-
-[Depex]
-  gEfiCpuArchProtocolGuid

+ 0 - 777
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c

@@ -1,777 +0,0 @@
-/*++ @file  NorFlashFvbDxe.c
-
- Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- --*/
-
-#include <PiDxe.h>
-
-#include <Library/PcdLib.h>
-#include <Library/BaseLib.h>
-#include <Library/UefiLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-
-#include <Guid/VariableFormat.h>
-#include <Guid/SystemNvDataGuid.h>
-#include <Guid/NvVarStoreFormatted.h>
-
-#include "NorFlash.h"
-
-extern UINTN  mFlashNvStorageVariableBase;
-///
-/// The Firmware Volume Block Protocol is the low-level interface
-/// to a firmware volume. File-level access to a firmware volume
-/// should not be done using the Firmware Volume Block Protocol.
-/// Normal access to a firmware volume must use the Firmware
-/// Volume Protocol. Typically, only the file system driver that
-/// produces the Firmware Volume Protocol will bind to the
-/// Firmware Volume Block Protocol.
-///
-
-/**
-  Initialises the FV Header and Variable Store Header
-  to support variable operations.
-
-  @param[in]  Ptr - Location to initialise the headers
-
-**/
-EFI_STATUS
-InitializeFvAndVariableStoreHeaders (
-  IN NOR_FLASH_INSTANCE  *Instance
-  )
-{
-  EFI_STATUS                  Status;
-  VOID                        *Headers;
-  UINTN                       HeadersLength;
-  EFI_FIRMWARE_VOLUME_HEADER  *FirmwareVolumeHeader;
-  VARIABLE_STORE_HEADER       *VariableStoreHeader;
-  UINT32                      NvStorageFtwSpareSize;
-  UINT32                      NvStorageFtwWorkingSize;
-  UINT32                      NvStorageVariableSize;
-  UINT64                      NvStorageFtwSpareBase;
-  UINT64                      NvStorageFtwWorkingBase;
-  UINT64                      NvStorageVariableBase;
-
-  HeadersLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY) + sizeof (VARIABLE_STORE_HEADER);
-  Headers       = AllocateZeroPool (HeadersLength);
-
-  NvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
-  NvStorageFtwSpareSize   = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
-  NvStorageVariableSize   = PcdGet32 (PcdFlashNvStorageVariableSize);
-
-  NvStorageFtwSpareBase = (PcdGet64 (PcdFlashNvStorageFtwSpareBase64) != 0) ?
-                          PcdGet64 (PcdFlashNvStorageFtwSpareBase64) : PcdGet32 (PcdFlashNvStorageFtwSpareBase);
-  NvStorageFtwWorkingBase = (PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) != 0) ?
-                            PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) : PcdGet32 (PcdFlashNvStorageFtwWorkingBase);
-  NvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
-                          PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
-
-  // FirmwareVolumeHeader->FvLength is declared to have the Variable area AND the FTW working area AND the FTW Spare contiguous.
-  if ((NvStorageVariableBase + NvStorageVariableSize) != NvStorageFtwWorkingBase) {
-    DEBUG ((
-      DEBUG_ERROR,
-      "%a: NvStorageFtwWorkingBase is not contiguous with NvStorageVariableBase region\n",
-      __FUNCTION__
-      ));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  if ((NvStorageFtwWorkingBase + NvStorageFtwWorkingSize) != NvStorageFtwSpareBase) {
-    DEBUG ((
-      DEBUG_ERROR,
-      "%a: NvStorageFtwSpareBase is not contiguous with NvStorageFtwWorkingBase region\n",
-      __FUNCTION__
-      ));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  // Check if the size of the area is at least one block size
-  if ((NvStorageVariableSize <= 0) || (NvStorageVariableSize / Instance->Media.BlockSize <= 0)) {
-    DEBUG ((
-      DEBUG_ERROR,
-      "%a: NvStorageVariableSize is 0x%x, should be atleast one block size\n",
-      __FUNCTION__,
-      NvStorageVariableSize
-      ));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  if ((NvStorageFtwWorkingSize <= 0) || (NvStorageFtwWorkingSize / Instance->Media.BlockSize <= 0)) {
-    DEBUG ((
-      DEBUG_ERROR,
-      "%a: NvStorageFtwWorkingSize is 0x%x, should be atleast one block size\n",
-      __FUNCTION__,
-      NvStorageFtwWorkingSize
-      ));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  if ((NvStorageFtwSpareSize <= 0) || (NvStorageFtwSpareSize / Instance->Media.BlockSize <= 0)) {
-    DEBUG ((
-      DEBUG_ERROR,
-      "%a: NvStorageFtwSpareSize is 0x%x, should be atleast one block size\n",
-      __FUNCTION__,
-      NvStorageFtwSpareSize
-      ));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  // Ensure the Variable area Base Addresses are aligned on a block size boundaries
-  if ((NvStorageVariableBase % Instance->Media.BlockSize != 0) ||
-      (NvStorageFtwWorkingBase % Instance->Media.BlockSize != 0) ||
-      (NvStorageFtwSpareBase % Instance->Media.BlockSize != 0))
-  {
-    DEBUG ((DEBUG_ERROR, "%a: NvStorage Base addresses must be aligned to block size boundaries", __FUNCTION__));
-    return EFI_INVALID_PARAMETER;
-  }
-
-  //
-  // EFI_FIRMWARE_VOLUME_HEADER
-  //
-  FirmwareVolumeHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Headers;
-  CopyGuid (&FirmwareVolumeHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid);
-  FirmwareVolumeHeader->FvLength =
-    PcdGet32 (PcdFlashNvStorageVariableSize) +
-    PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
-    PcdGet32 (PcdFlashNvStorageFtwSpareSize);
-  FirmwareVolumeHeader->Signature  = EFI_FVH_SIGNATURE;
-  FirmwareVolumeHeader->Attributes = (EFI_FVB_ATTRIBUTES_2)(
-                                                            EFI_FVB2_READ_ENABLED_CAP   | // Reads may be enabled
-                                                            EFI_FVB2_READ_STATUS        | // Reads are currently enabled
-                                                            EFI_FVB2_STICKY_WRITE       | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
-                                                            EFI_FVB2_MEMORY_MAPPED      | // It is memory mapped
-                                                            EFI_FVB2_ERASE_POLARITY     | // After erasure all bits take this value (i.e. '1')
-                                                            EFI_FVB2_WRITE_STATUS       | // Writes are currently enabled
-                                                            EFI_FVB2_WRITE_ENABLED_CAP    // Writes may be enabled
-                                                            );
-  FirmwareVolumeHeader->HeaderLength          = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY);
-  FirmwareVolumeHeader->Revision              = EFI_FVH_REVISION;
-  FirmwareVolumeHeader->BlockMap[0].NumBlocks = Instance->Media.LastBlock + 1;
-  FirmwareVolumeHeader->BlockMap[0].Length    = Instance->Media.BlockSize;
-  FirmwareVolumeHeader->BlockMap[1].NumBlocks = 0;
-  FirmwareVolumeHeader->BlockMap[1].Length    = 0;
-  FirmwareVolumeHeader->Checksum              = CalculateCheckSum16 ((UINT16 *)FirmwareVolumeHeader, FirmwareVolumeHeader->HeaderLength);
-
-  //
-  // VARIABLE_STORE_HEADER
-  //
-  VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)Headers + FirmwareVolumeHeader->HeaderLength);
-  CopyGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid);
-  VariableStoreHeader->Size   = PcdGet32 (PcdFlashNvStorageVariableSize) - FirmwareVolumeHeader->HeaderLength;
-  VariableStoreHeader->Format = VARIABLE_STORE_FORMATTED;
-  VariableStoreHeader->State  = VARIABLE_STORE_HEALTHY;
-
-  // Install the combined super-header in the NorFlash
-  Status = FvbWrite (&Instance->FvbProtocol, 0, 0, &HeadersLength, Headers);
-
-  FreePool (Headers);
-  return Status;
-}
-
-/**
-  Check the integrity of firmware volume header.
-
-  @param[in] FwVolHeader - A pointer to a firmware volume header
-
-  @retval  EFI_SUCCESS   - The firmware volume is consistent
-  @retval  EFI_NOT_FOUND - The firmware volume has been corrupted.
-
-**/
-EFI_STATUS
-ValidateFvHeader (
-  IN  NOR_FLASH_INSTANCE  *Instance
-  )
-{
-  UINT16                      Checksum;
-  EFI_FIRMWARE_VOLUME_HEADER  *FwVolHeader;
-  VARIABLE_STORE_HEADER       *VariableStoreHeader;
-  UINTN                       VariableStoreLength;
-  UINTN                       FvLength;
-
-  FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Instance->RegionBaseAddress;
-
-  FvLength = PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
-             PcdGet32 (PcdFlashNvStorageFtwSpareSize);
-
-  //
-  // Verify the header revision, header signature, length
-  // Length of FvBlock cannot be 2**64-1
-  // HeaderLength cannot be an odd number
-  //
-  if (  (FwVolHeader->Revision  != EFI_FVH_REVISION)
-     || (FwVolHeader->Signature != EFI_FVH_SIGNATURE)
-     || (FwVolHeader->FvLength  != FvLength)
-        )
-  {
-    DEBUG ((
-      DEBUG_INFO,
-      "%a: No Firmware Volume header present\n",
-      __FUNCTION__
-      ));
-    return EFI_NOT_FOUND;
-  }
-
-  // Check the Firmware Volume Guid
-  if ( CompareGuid (&FwVolHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid) == FALSE ) {
-    DEBUG ((
-      DEBUG_INFO,
-      "%a: Firmware Volume Guid non-compatible\n",
-      __FUNCTION__
-      ));
-    return EFI_NOT_FOUND;
-  }
-
-  // Verify the header checksum
-  Checksum = CalculateSum16 ((UINT16 *)FwVolHeader, FwVolHeader->HeaderLength);
-  if (Checksum != 0) {
-    DEBUG ((
-      DEBUG_INFO,
-      "%a: FV checksum is invalid (Checksum:0x%X)\n",
-      __FUNCTION__,
-      Checksum
-      ));
-    return EFI_NOT_FOUND;
-  }
-
-  VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)FwVolHeader + FwVolHeader->HeaderLength);
-
-  // Check the Variable Store Guid
-  if (!CompareGuid (&VariableStoreHeader->Signature, &gEfiVariableGuid) &&
-      !CompareGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid))
-  {
-    DEBUG ((
-      DEBUG_INFO,
-      "%a: Variable Store Guid non-compatible\n",
-      __FUNCTION__
-      ));
-    return EFI_NOT_FOUND;
-  }
-
-  VariableStoreLength = PcdGet32 (PcdFlashNvStorageVariableSize) - FwVolHeader->HeaderLength;
-  if (VariableStoreHeader->Size != VariableStoreLength) {
-    DEBUG ((
-      DEBUG_INFO,
-      "%a: Variable Store Length does not match\n",
-      __FUNCTION__
-      ));
-    return EFI_NOT_FOUND;
-  }
-
-  return EFI_SUCCESS;
-}
-
-/**
- The GetAttributes() function retrieves the attributes and
- current settings of the block.
-
- @param This         Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Attributes   Pointer to EFI_FVB_ATTRIBUTES_2 in which the attributes and
-                     current settings are returned.
-                     Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
-
- @retval EFI_SUCCESS The firmware volume attributes were returned.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetAttributes (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  OUT       EFI_FVB_ATTRIBUTES_2                 *Attributes
-  )
-{
-  EFI_FVB_ATTRIBUTES_2  FlashFvbAttributes;
-  NOR_FLASH_INSTANCE    *Instance;
-
-  Instance = INSTANCE_FROM_FVB_THIS (This);
-
-  FlashFvbAttributes = (EFI_FVB_ATTRIBUTES_2)(
-
-                                              EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
-                                              EFI_FVB2_READ_STATUS      | // Reads are currently enabled
-                                              EFI_FVB2_STICKY_WRITE     | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
-                                              EFI_FVB2_MEMORY_MAPPED    | // It is memory mapped
-                                              EFI_FVB2_ERASE_POLARITY     // After erasure all bits take this value (i.e. '1')
-
-                                              );
-
-  // Check if it is write protected
-  if (Instance->Media.ReadOnly != TRUE) {
-    FlashFvbAttributes = FlashFvbAttributes         |
-                         EFI_FVB2_WRITE_STATUS      | // Writes are currently enabled
-                         EFI_FVB2_WRITE_ENABLED_CAP;  // Writes may be enabled
-  }
-
-  *Attributes = FlashFvbAttributes;
-
-  DEBUG ((DEBUG_BLKIO, "FvbGetAttributes(0x%X)\n", *Attributes));
-
-  return EFI_SUCCESS;
-}
-
-/**
- The SetAttributes() function sets configurable firmware volume attributes
- and returns the new settings of the firmware volume.
-
-
- @param This                     Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Attributes               On input, Attributes is a pointer to EFI_FVB_ATTRIBUTES_2
-                                 that contains the desired firmware volume settings.
-                                 On successful return, it contains the new settings of
-                                 the firmware volume.
-                                 Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
-
- @retval EFI_SUCCESS             The firmware volume attributes were returned.
-
- @retval EFI_INVALID_PARAMETER   The attributes requested are in conflict with the capabilities
-                                 as declared in the firmware volume header.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbSetAttributes (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  IN OUT    EFI_FVB_ATTRIBUTES_2                 *Attributes
-  )
-{
-  DEBUG ((DEBUG_BLKIO, "FvbSetAttributes(0x%X) is not supported\n", *Attributes));
-  return EFI_UNSUPPORTED;
-}
-
-/**
- The GetPhysicalAddress() function retrieves the base address of
- a memory-mapped firmware volume. This function should be called
- only for memory-mapped firmware volumes.
-
- @param This               Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Address            Pointer to a caller-allocated
-                           EFI_PHYSICAL_ADDRESS that, on successful
-                           return from GetPhysicalAddress(), contains the
-                           base address of the firmware volume.
-
- @retval EFI_SUCCESS       The firmware volume base address was returned.
-
- @retval EFI_NOT_SUPPORTED The firmware volume is not memory mapped.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetPhysicalAddress (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  OUT       EFI_PHYSICAL_ADDRESS                 *Address
-  )
-{
-  NOR_FLASH_INSTANCE  *Instance;
-
-  Instance = INSTANCE_FROM_FVB_THIS (This);
-
-  DEBUG ((DEBUG_BLKIO, "FvbGetPhysicalAddress(BaseAddress=0x%08x)\n", Instance->RegionBaseAddress));
-
-  ASSERT (Address != NULL);
-
-  *Address = mFlashNvStorageVariableBase;
-  return EFI_SUCCESS;
-}
-
-/**
- The GetBlockSize() function retrieves the size of the requested
- block. It also returns the number of additional blocks with
- the identical size. The GetBlockSize() function is used to
- retrieve the block map (see EFI_FIRMWARE_VOLUME_HEADER).
-
-
- @param This                     Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba                      Indicates the block for which to return the size.
-
- @param BlockSize                Pointer to a caller-allocated UINTN in which
-                                 the size of the block is returned.
-
- @param NumberOfBlocks           Pointer to a caller-allocated UINTN in
-                                 which the number of consecutive blocks,
-                                 starting with Lba, is returned. All
-                                 blocks in this range have a size of
-                                 BlockSize.
-
-
- @retval EFI_SUCCESS             The firmware volume base address was returned.
-
- @retval EFI_INVALID_PARAMETER   The requested LBA is out of range.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetBlockSize (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  IN        EFI_LBA                              Lba,
-  OUT       UINTN                                *BlockSize,
-  OUT       UINTN                                *NumberOfBlocks
-  )
-{
-  EFI_STATUS          Status;
-  NOR_FLASH_INSTANCE  *Instance;
-
-  Instance = INSTANCE_FROM_FVB_THIS (This);
-
-  DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize(Lba=%ld, BlockSize=0x%x, LastBlock=%ld)\n", Lba, Instance->Media.BlockSize, Instance->Media.LastBlock));
-
-  if (Lba > Instance->Media.LastBlock) {
-    DEBUG ((DEBUG_ERROR, "FvbGetBlockSize: ERROR - Parameter LBA %ld is beyond the last Lba (%ld).\n", Lba, Instance->Media.LastBlock));
-    Status = EFI_INVALID_PARAMETER;
-  } else {
-    // This is easy because in this platform each NorFlash device has equal sized blocks.
-    *BlockSize      = (UINTN)Instance->Media.BlockSize;
-    *NumberOfBlocks = (UINTN)(Instance->Media.LastBlock - Lba + 1);
-
-    DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize: *BlockSize=0x%x, *NumberOfBlocks=0x%x.\n", *BlockSize, *NumberOfBlocks));
-
-    Status = EFI_SUCCESS;
-  }
-
-  return Status;
-}
-
-/**
- Reads the specified number of bytes into a buffer from the specified block.
-
- The Read() function reads the requested number of bytes from the
- requested block and stores them in the provided buffer.
- Implementations should be mindful that the firmware volume
- might be in the ReadDisabled state. If it is in this state,
- the Read() function must return the status code
- EFI_ACCESS_DENIED without modifying the contents of the
- buffer. The Read() function must also prevent spanning block
- boundaries. If a read is requested that would span a block
- boundary, the read must read up to the boundary but not
- beyond. The output parameter NumBytes must be set to correctly
- indicate the number of bytes actually read. The caller must be
- aware that a read may be partially completed.
-
- @param This                 Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba                  The starting logical block index from which to read.
-
- @param Offset               Offset into the block at which to begin reading.
-
- @param NumBytes             Pointer to a UINTN.
-                             At entry, *NumBytes contains the total size of the buffer.
-                             At exit, *NumBytes contains the total number of bytes read.
-
- @param Buffer               Pointer to a caller-allocated buffer that will be used
-                             to hold the data that is read.
-
- @retval EFI_SUCCESS         The firmware volume was read successfully,  and contents are
-                             in Buffer.
-
- @retval EFI_BAD_BUFFER_SIZE Read attempted across an LBA boundary.
-                             On output, NumBytes contains the total number of bytes
-                             returned in Buffer.
-
- @retval EFI_ACCESS_DENIED   The firmware volume is in the ReadDisabled state.
-
- @retval EFI_DEVICE_ERROR    The block device is not functioning correctly and could not be read.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbRead (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  IN        EFI_LBA                              Lba,
-  IN        UINTN                                Offset,
-  IN OUT    UINTN                                *NumBytes,
-  IN OUT    UINT8                                *Buffer
-  )
-{
-  EFI_STATUS          TempStatus;
-  UINTN               BlockSize;
-  NOR_FLASH_INSTANCE  *Instance;
-
-  Instance = INSTANCE_FROM_FVB_THIS (This);
-
-  DEBUG ((DEBUG_BLKIO, "FvbRead(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Instance->StartLba + Lba, Offset, *NumBytes, Buffer));
-
-  TempStatus = EFI_SUCCESS;
-
-  // Cache the block size to avoid de-referencing pointers all the time
-  BlockSize = Instance->Media.BlockSize;
-
-  DEBUG ((DEBUG_BLKIO, "FvbRead: Check if (Offset=0x%x + NumBytes=0x%x) <= BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
-
-  // The read must not span block boundaries.
-  // We need to check each variable individually because adding two large values together overflows.
-  if ((Offset               >= BlockSize) ||
-      (*NumBytes            >  BlockSize) ||
-      ((Offset + *NumBytes) >  BlockSize))
-  {
-    DEBUG ((DEBUG_ERROR, "FvbRead: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // We must have some bytes to read
-  if (*NumBytes == 0) {
-    return EFI_BAD_BUFFER_SIZE;
-  }
-
-  // Decide if we are doing full block reads or not.
-  if (*NumBytes % BlockSize != 0) {
-    TempStatus = NorFlashRead (Instance, Instance->StartLba + Lba, Offset, *NumBytes, Buffer);
-    if (EFI_ERROR (TempStatus)) {
-      return EFI_DEVICE_ERROR;
-    }
-  } else {
-    // Read NOR Flash data into shadow buffer
-    TempStatus = NorFlashReadBlocks (Instance, Instance->StartLba + Lba, BlockSize, Buffer);
-    if (EFI_ERROR (TempStatus)) {
-      // Return one of the pre-approved error statuses
-      return EFI_DEVICE_ERROR;
-    }
-  }
-
-  return EFI_SUCCESS;
-}
-
-/**
- Writes the specified number of bytes from the input buffer to the block.
-
- The Write() function writes the specified number of bytes from
- the provided buffer to the specified block and offset. If the
- firmware volume is sticky write, the caller must ensure that
- all the bits of the specified range to write are in the
- EFI_FVB_ERASE_POLARITY state before calling the Write()
- function, or else the result will be unpredictable. This
- unpredictability arises because, for a sticky-write firmware
- volume, a write may negate a bit in the EFI_FVB_ERASE_POLARITY
- state but cannot flip it back again.  Before calling the
- Write() function,  it is recommended for the caller to first call
- the EraseBlocks() function to erase the specified block to
- write. A block erase cycle will transition bits from the
- (NOT)EFI_FVB_ERASE_POLARITY state back to the
- EFI_FVB_ERASE_POLARITY state. Implementations should be
- mindful that the firmware volume might be in the WriteDisabled
- state. If it is in this state, the Write() function must
- return the status code EFI_ACCESS_DENIED without modifying the
- contents of the firmware volume. The Write() function must
- also prevent spanning block boundaries. If a write is
- requested that spans a block boundary, the write must store up
- to the boundary but not beyond. The output parameter NumBytes
- must be set to correctly indicate the number of bytes actually
- written. The caller must be aware that a write may be
- partially completed. All writes, partial or otherwise, must be
- fully flushed to the hardware before the Write() service
- returns.
-
- @param This                 Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba                  The starting logical block index to write to.
-
- @param Offset               Offset into the block at which to begin writing.
-
- @param NumBytes             The pointer to a UINTN.
-                             At entry, *NumBytes contains the total size of the buffer.
-                             At exit, *NumBytes contains the total number of bytes actually written.
-
- @param Buffer               The pointer to a caller-allocated buffer that contains the source for the write.
-
- @retval EFI_SUCCESS         The firmware volume was written successfully.
-
- @retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary.
-                             On output, NumBytes contains the total number of bytes
-                             actually written.
-
- @retval EFI_ACCESS_DENIED   The firmware volume is in the WriteDisabled state.
-
- @retval EFI_DEVICE_ERROR    The block device is malfunctioning and could not be written.
-
-
- **/
-EFI_STATUS
-EFIAPI
-FvbWrite (
-  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  IN        EFI_LBA                              Lba,
-  IN        UINTN                                Offset,
-  IN OUT    UINTN                                *NumBytes,
-  IN        UINT8                                *Buffer
-  )
-{
-  NOR_FLASH_INSTANCE  *Instance;
-
-  Instance = INSTANCE_FROM_FVB_THIS (This);
-
-  return NorFlashWriteSingleBlock (Instance, Instance->StartLba + Lba, Offset, NumBytes, Buffer);
-}
-
-/**
- Erases and initialises a firmware volume block.
-
- The EraseBlocks() function erases one or more blocks as denoted
- by the variable argument list. The entire parameter list of
- blocks must be verified before erasing any blocks. If a block is
- requested that does not exist within the associated firmware
- volume (it has a larger index than the last block of the
- firmware volume), the EraseBlocks() function must return the
- status code EFI_INVALID_PARAMETER without modifying the contents
- of the firmware volume. Implementations should be mindful that
- the firmware volume might be in the WriteDisabled state. If it
- is in this state, the EraseBlocks() function must return the
- status code EFI_ACCESS_DENIED without modifying the contents of
- the firmware volume. All calls to EraseBlocks() must be fully
- flushed to the hardware before the EraseBlocks() service
- returns.
-
- @param This                     Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL
- instance.
-
- @param ...                      The variable argument list is a list of tuples.
-                                 Each tuple describes a range of LBAs to erase
-                                 and consists of the following:
-                                 - An EFI_LBA that indicates the starting LBA
-                                 - A UINTN that indicates the number of blocks to erase.
-
-                                 The list is terminated with an EFI_LBA_LIST_TERMINATOR.
-                                 For example, the following indicates that two ranges of blocks
-                                 (5-7 and 10-11) are to be erased:
-                                 EraseBlocks (This, 5, 3, 10, 2, EFI_LBA_LIST_TERMINATOR);
-
- @retval EFI_SUCCESS             The erase request successfully completed.
-
- @retval EFI_ACCESS_DENIED       The firmware volume is in the WriteDisabled state.
-
- @retval EFI_DEVICE_ERROR        The block device is not functioning correctly and could not be written.
-                                 The firmware device may have been partially erased.
-
- @retval EFI_INVALID_PARAMETER   One or more of the LBAs listed in the variable argument list do
-                                 not exist in the firmware volume.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbEraseBlocks (
-  IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL  *This,
-  ...
-  )
-{
-  EFI_STATUS          Status;
-  VA_LIST             Args;
-  UINTN               BlockAddress; // Physical address of Lba to erase
-  EFI_LBA             StartingLba;  // Lba from which we start erasing
-  UINTN               NumOfLba;     // Number of Lba blocks to erase
-  NOR_FLASH_INSTANCE  *Instance;
-
-  Instance = INSTANCE_FROM_FVB_THIS (This);
-
-  DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks()\n"));
-
-  Status = EFI_SUCCESS;
-
-  // Detect WriteDisabled state
-  if (Instance->Media.ReadOnly == TRUE) {
-    // Firmware volume is in WriteDisabled state
-    DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Device is in WriteDisabled state.\n"));
-    return EFI_ACCESS_DENIED;
-  }
-
-  // Before erasing, check the entire list of parameters to ensure all specified blocks are valid
-
-  VA_START (Args, This);
-  do {
-    // Get the Lba from which we start erasing
-    StartingLba = VA_ARG (Args, EFI_LBA);
-
-    // Have we reached the end of the list?
-    if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
-      // Exit the while loop
-      break;
-    }
-
-    // How many Lba blocks are we requested to erase?
-    NumOfLba = VA_ARG (Args, UINTN);
-
-    // All blocks must be within range
-    DEBUG ((
-      DEBUG_BLKIO,
-      "FvbEraseBlocks: Check if: ( StartingLba=%ld + NumOfLba=%Lu - 1 ) > LastBlock=%ld.\n",
-      Instance->StartLba + StartingLba,
-      (UINT64)NumOfLba,
-      Instance->Media.LastBlock
-      ));
-    if ((NumOfLba == 0) || ((Instance->StartLba + StartingLba + NumOfLba - 1) > Instance->Media.LastBlock)) {
-      VA_END (Args);
-      DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Lba range goes past the last Lba.\n"));
-      Status = EFI_INVALID_PARAMETER;
-      goto EXIT;
-    }
-  } while (TRUE);
-
-  VA_END (Args);
-
-  //
-  // To get here, all must be ok, so start erasing
-  //
-  VA_START (Args, This);
-  do {
-    // Get the Lba from which we start erasing
-    StartingLba = VA_ARG (Args, EFI_LBA);
-
-    // Have we reached the end of the list?
-    if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
-      // Exit the while loop
-      break;
-    }
-
-    // How many Lba blocks are we requested to erase?
-    NumOfLba = VA_ARG (Args, UINTN);
-
-    // Go through each one and erase it
-    while (NumOfLba > 0) {
-      // Get the physical address of Lba to erase
-      BlockAddress = GET_NOR_BLOCK_ADDRESS (
-                       Instance->RegionBaseAddress,
-                       Instance->StartLba + StartingLba,
-                       Instance->Media.BlockSize
-                       );
-
-      // Erase it
-      DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks: Erasing Lba=%ld @ 0x%08x.\n", Instance->StartLba + StartingLba, BlockAddress));
-      Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
-      if (EFI_ERROR (Status)) {
-        VA_END (Args);
-        Status = EFI_DEVICE_ERROR;
-        goto EXIT;
-      }
-
-      // Move to the next Lba
-      StartingLba++;
-      NumOfLba--;
-    }
-  } while (TRUE);
-
-  VA_END (Args);
-
-EXIT:
-  return Status;
-}
-
-/**
-  Fixup internal data so that EFI can be call in virtual mode.
-  Call the passed in Child Notify event and convert any pointers in
-  lib to virtual mode.
-
-  @param[in]    Event   The Event that is being processed
-  @param[in]    Context Event Context
-**/
-VOID
-EFIAPI
-FvbVirtualNotifyEvent (
-  IN EFI_EVENT  Event,
-  IN VOID       *Context
-  )
-{
-  EfiConvertPointer (0x0, (VOID **)&mFlashNvStorageVariableBase);
-  return;
-}

+ 0 - 383
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c

@@ -1,383 +0,0 @@
-/** @file  NorFlashStandaloneMm.c
-
-  Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-  Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
-
-  SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/MmServicesTableLib.h>
-
-#include "NorFlash.h"
-
-//
-// Global variable declarations
-//
-NOR_FLASH_INSTANCE  **mNorFlashInstances;
-UINT32              mNorFlashDeviceCount;
-UINTN               mFlashNvStorageVariableBase;
-
-NOR_FLASH_INSTANCE  mNorFlashInstanceTemplate = {
-  NOR_FLASH_SIGNATURE, // Signature
-  NULL,                // Handle ... NEED TO BE FILLED
-
-  0, // DeviceBaseAddress ... NEED TO BE FILLED
-  0, // RegionBaseAddress ... NEED TO BE FILLED
-  0, // Size ... NEED TO BE FILLED
-  0, // StartLba
-
-  {
-    EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
-    NULL,                            // Media ... NEED TO BE FILLED
-    NULL,                            // Reset;
-    NULL,                            // ReadBlocks
-    NULL,                            // WriteBlocks
-    NULL                             // FlushBlocks
-  }, // BlockIoProtocol
-
-  {
-    0,     // MediaId ... NEED TO BE FILLED
-    FALSE, // RemovableMedia
-    TRUE,  // MediaPresent
-    FALSE, // LogicalPartition
-    FALSE, // ReadOnly
-    FALSE, // WriteCaching;
-    0,     // BlockSize ... NEED TO BE FILLED
-    4,     //  IoAlign
-    0,     // LastBlock ... NEED TO BE FILLED
-    0,     // LowestAlignedLba
-    1,     // LogicalBlocksPerPhysicalBlock
-  }, // Media;
-
-  {
-    EFI_DISK_IO_PROTOCOL_REVISION, // Revision
-    NULL,                          // ReadDisk
-    NULL                           // WriteDisk
-  },
-
-  {
-    FvbGetAttributes,      // GetAttributes
-    FvbSetAttributes,      // SetAttributes
-    FvbGetPhysicalAddress, // GetPhysicalAddress
-    FvbGetBlockSize,       // GetBlockSize
-    FvbRead,               // Read
-    FvbWrite,              // Write
-    FvbEraseBlocks,        // EraseBlocks
-    NULL,                  // ParentHandle
-  },    //  FvbProtoccol;
-  NULL, // ShadowBuffer
-  {
-    {
-      {
-        HARDWARE_DEVICE_PATH,
-        HW_VENDOR_DP,
-        {
-          (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
-          (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
-        }
-      },
-      { 0x0,                               0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
-      },                                                             // GUID ... NEED TO BE FILLED
-    },
-    0, // Index
-    {
-      END_DEVICE_PATH_TYPE,
-      END_ENTIRE_DEVICE_PATH_SUBTYPE,
-      { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
-    }
-  }   // DevicePath
-};
-
-EFI_STATUS
-NorFlashCreateInstance (
-  IN UINTN                NorFlashDeviceBase,
-  IN UINTN                NorFlashRegionBase,
-  IN UINTN                NorFlashSize,
-  IN UINT32               Index,
-  IN UINT32               BlockSize,
-  IN BOOLEAN              SupportFvb,
-  OUT NOR_FLASH_INSTANCE  **NorFlashInstance
-  )
-{
-  EFI_STATUS          Status;
-  NOR_FLASH_INSTANCE  *Instance;
-
-  ASSERT (NorFlashInstance != NULL);
-
-  Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
-  if (Instance == NULL) {
-    return EFI_OUT_OF_RESOURCES;
-  }
-
-  Instance->DeviceBaseAddress = NorFlashDeviceBase;
-  Instance->RegionBaseAddress = NorFlashRegionBase;
-  Instance->Size              = NorFlashSize;
-
-  Instance->BlockIoProtocol.Media = &Instance->Media;
-  Instance->Media.MediaId         = Index;
-  Instance->Media.BlockSize       = BlockSize;
-  Instance->Media.LastBlock       = (NorFlashSize / BlockSize)-1;
-
-  CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
-  Instance->DevicePath.Index = (UINT8)Index;
-
-  Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
-  if (Instance->ShadowBuffer == NULL) {
-    return EFI_OUT_OF_RESOURCES;
-  }
-
-  if (SupportFvb) {
-    NorFlashFvbInitialize (Instance);
-
-    Status = gMmst->MmInstallProtocolInterface (
-                      &Instance->Handle,
-                      &gEfiSmmFirmwareVolumeBlockProtocolGuid,
-                      EFI_NATIVE_INTERFACE,
-                      &Instance->FvbProtocol
-                      );
-    if (EFI_ERROR (Status)) {
-      FreePool (Instance);
-      return Status;
-    }
-  } else {
-    DEBUG ((DEBUG_ERROR, "standalone MM NOR Flash driver only support FVB.\n"));
-    FreePool (Instance);
-    return EFI_UNSUPPORTED;
-  }
-
-  *NorFlashInstance = Instance;
-  return Status;
-}
-
-/**
- * This function unlock and erase an entire NOR Flash block.
- **/
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN UINTN               BlockAddress
-  )
-{
-  EFI_STATUS  Status;
-  UINTN       Index;
-
-  Index = 0;
-  // The block erase might fail a first time (SW bug ?). Retry it ...
-  do {
-    // Unlock the block if we have to
-    Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
-    if (EFI_ERROR (Status)) {
-      break;
-    }
-
-    Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
-    Index++;
-  } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
-
-  if (Index == NOR_FLASH_ERASE_RETRY) {
-    DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
-  }
-
-  return Status;
-}
-
-EFI_STATUS
-NorFlashWriteFullBlock (
-  IN NOR_FLASH_INSTANCE  *Instance,
-  IN EFI_LBA             Lba,
-  IN UINT32              *DataBuffer,
-  IN UINT32              BlockSizeInWords
-  )
-{
-  EFI_STATUS  Status;
-  UINTN       WordAddress;
-  UINT32      WordIndex;
-  UINTN       BufferIndex;
-  UINTN       BlockAddress;
-  UINTN       BuffersInBlock;
-  UINTN       RemainingWords;
-  UINTN       Cnt;
-
-  Status = EFI_SUCCESS;
-
-  // Get the physical address of the block
-  BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
-
-  // Start writing from the first address at the start of the block
-  WordAddress = BlockAddress;
-
-  Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
-  if (EFI_ERROR (Status)) {
-    DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
-    goto EXIT;
-  }
-
-  // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
-
-  // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
-  if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
-    // First, break the entire block into buffer-sized chunks.
-    BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
-
-    // Then feed each buffer chunk to the NOR Flash
-    // If a buffer does not contain any data, don't write it.
-    for (BufferIndex = 0;
-         BufferIndex < BuffersInBlock;
-         BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
-         )
-    {
-      // Check the buffer to see if it contains any data (not set all 1s).
-      for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
-        if (~DataBuffer[Cnt] != 0 ) {
-          // Some data found, write the buffer.
-          Status = NorFlashWriteBuffer (
-                     Instance,
-                     WordAddress,
-                     P30_MAX_BUFFER_SIZE_IN_BYTES,
-                     DataBuffer
-                     );
-          if (EFI_ERROR (Status)) {
-            goto EXIT;
-          }
-
-          break;
-        }
-      }
-    }
-
-    // Finally, finish off any remaining words that are less than the maximum size of the buffer
-    RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
-
-    if (RemainingWords != 0) {
-      Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
-      if (EFI_ERROR (Status)) {
-        goto EXIT;
-      }
-    }
-  } else {
-    // For now, use the single word programming algorithm
-    // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
-    // i.e. which ends in the range 0x......01 - 0x......7F.
-    for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
-      Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
-      if (EFI_ERROR (Status)) {
-        goto EXIT;
-      }
-    }
-  }
-
-EXIT:
-  if (EFI_ERROR (Status)) {
-    DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
-  }
-
-  return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashInitialise (
-  IN EFI_HANDLE           ImageHandle,
-  IN EFI_MM_SYSTEM_TABLE  *MmSystemTable
-  )
-{
-  EFI_STATUS             Status;
-  UINT32                 Index;
-  NOR_FLASH_DESCRIPTION  *NorFlashDevices;
-  BOOLEAN                ContainVariableStorage;
-
-  Status = NorFlashPlatformInitialization ();
-  if (EFI_ERROR (Status)) {
-    DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
-    return Status;
-  }
-
-  Status = NorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
-  if (EFI_ERROR (Status)) {
-    DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
-    return Status;
-  }
-
-  mNorFlashInstances = AllocatePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
-
-  for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
-    // Check if this NOR Flash device contain the variable storage region
-
-    if (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
-      ContainVariableStorage =
-        (NorFlashDevices[Index].RegionBaseAddress <= FixedPcdGet64 (PcdFlashNvStorageVariableBase64)) &&
-        (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) + FixedPcdGet32 (PcdFlashNvStorageVariableSize) <=
-         NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
-    } else {
-      ContainVariableStorage =
-        (NorFlashDevices[Index].RegionBaseAddress <= FixedPcdGet32 (PcdFlashNvStorageVariableBase)) &&
-        (FixedPcdGet32 (PcdFlashNvStorageVariableBase) + FixedPcdGet32 (PcdFlashNvStorageVariableSize) <=
-         NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
-    }
-
-    Status = NorFlashCreateInstance (
-               NorFlashDevices[Index].DeviceBaseAddress,
-               NorFlashDevices[Index].RegionBaseAddress,
-               NorFlashDevices[Index].Size,
-               Index,
-               NorFlashDevices[Index].BlockSize,
-               ContainVariableStorage,
-               &mNorFlashInstances[Index]
-               );
-    if (EFI_ERROR (Status)) {
-      DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
-    }
-  }
-
-  return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
-  IN NOR_FLASH_INSTANCE  *Instance
-  )
-{
-  EFI_STATUS  Status;
-  UINT32      FvbNumLba;
-
-  ASSERT ((Instance != NULL));
-
-  mFlashNvStorageVariableBase = (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
-                                FixedPcdGet64 (PcdFlashNvStorageVariableBase64) : FixedPcdGet32 (PcdFlashNvStorageVariableBase);
-  // Set the index of the first LBA for the FVB
-  Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
-
-  // Determine if there is a valid header at the beginning of the NorFlash
-  Status = ValidateFvHeader (Instance);
-
-  // Install the Default FVB header if required
-  if (EFI_ERROR (Status)) {
-    // There is no valid header, so time to install one.
-    DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
-    DEBUG ((
-      DEBUG_INFO,
-      "%a: Installing a correct one for this volume.\n",
-      __FUNCTION__
-      ));
-
-    // Erase all the NorFlash that is reserved for variable storage
-    FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
-
-    Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
-    if (EFI_ERROR (Status)) {
-      return Status;
-    }
-
-    // Install all appropriate headers
-    Status = InitializeFvAndVariableStoreHeaders (Instance);
-    if (EFI_ERROR (Status)) {
-      return Status;
-    }
-  }
-
-  return Status;
-}

+ 0 - 66
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf

@@ -1,66 +0,0 @@
-#/** @file
-#
-#  Component description file for NorFlashStandaloneMm module
-#
-#  Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.<BR>
-#  Copyright (c) 2020, Linaro, Ltd. All rights reserved.<BR>
-#
-#  SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
-  INF_VERSION                    = 0x00010005
-  BASE_NAME                      = ArmVeNorFlashStandaloneMm
-  FILE_GUID                      = e67d82ad-cd56-4071-9151-95ee44990bb0
-  MODULE_TYPE                    = MM_STANDALONE
-  VERSION_STRING                 = 1.0
-  PI_SPECIFICATION_VERSION       = 0x00010032
-  ENTRY_POINT                    = NorFlashInitialise
-
-[Sources.common]
-  NorFlash.h
-  NorFlash.c
-  NorFlashStandaloneMm.c
-  NorFlashFvb.c
-
-[Packages]
-  MdePkg/MdePkg.dec
-  MdeModulePkg/MdeModulePkg.dec
-  ArmPlatformPkg/ArmPlatformPkg.dec
-  EmbeddedPkg/EmbeddedPkg.dec
-
-[LibraryClasses]
-  BaseLib
-  BaseMemoryLib
-  DebugLib
-  IoLib
-  MemoryAllocationLib
-  MmServicesTableLib
-  NorFlashPlatformLib
-  StandaloneMmDriverEntryPoint
-
-[Guids]
-  gEfiSystemNvDataFvGuid
-  gEfiVariableGuid
-  gEfiAuthenticatedVariableGuid
-
-[Protocols]
-  gEfiSmmFirmwareVolumeBlockProtocolGuid
-
-[FixedPcd]
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
-
-[FeaturePcd]
-  gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
-
-[Depex]
-  TRUE

+ 0 - 30
ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h

@@ -1,30 +0,0 @@
-/** @file
-
- Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- **/
-
-#ifndef _NORFLASHPLATFORMLIB_H_
-#define _NORFLASHPLATFORMLIB_H_
-
-typedef struct {
-  UINTN    DeviceBaseAddress;       // Start address of the Device Base Address (DBA)
-  UINTN    RegionBaseAddress;       // Start address of one single region
-  UINTN    Size;
-  UINTN    BlockSize;
-} NOR_FLASH_DESCRIPTION;
-
-EFI_STATUS
-NorFlashPlatformInitialization (
-  VOID
-  );
-
-EFI_STATUS
-NorFlashPlatformGetDevices (
-  OUT NOR_FLASH_DESCRIPTION  **NorFlashDescriptions,
-  OUT UINT32                 *Count
-  );
-
-#endif /* _NORFLASHPLATFORMLIB_H_ */

+ 0 - 28
ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c

@@ -1,28 +0,0 @@
-/** @file
-
- Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- **/
-
-#include <Library/NorFlashPlatformLib.h>
-
-EFI_STATUS
-NorFlashPlatformInitialization (
-  VOID
-  )
-{
-  return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashPlatformGetDevices (
-  OUT NOR_FLASH_DESCRIPTION  **NorFlashDescriptions,
-  OUT UINT32                 *Count
-  )
-{
-  *NorFlashDescriptions = NULL;
-  *Count                = 0;
-  return EFI_SUCCESS;
-}

+ 0 - 24
ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf

@@ -1,24 +0,0 @@
-#/** @file
-#
-#  Component description file for NorFlashPlatformNullLib module
-#
-#  Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
-#
-#  SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
-  INF_VERSION                    = 0x00010005
-  BASE_NAME                      = NorFlashPlatformNullLib
-  FILE_GUID                      = 29b733ad-d066-4df6-8a89-b9df1beb818a
-  MODULE_TYPE                    = DXE_DRIVER
-  VERSION_STRING                 = 1.0
-  LIBRARY_CLASS                  = NorFlashPlatformLib
-
-[Sources.common]
-  NorFlashPlatformNullLib.c
-
-[Packages]
-  MdePkg/MdePkg.dec
-  ArmPlatformPkg/ArmPlatformPkg.dec