浏览代码

Platform/RaspberryPi: fix pci DT node address in SyncPcie()

To make sure the XHCI controller does not get reset by Linux in DT mode,
we remove its pci parent node from the device tree. However, the pci
node address has been updated in the Raspberry Pi 4 device tree [1] and
no longer matches the one we are trying to remove in SyncPcie(). This
results in the XHCI controller actually being reset by Linux, which
leads to errors during USB initialization:

[    3.563963] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    3.569538] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    3.577452] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[    3.587725] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    3.593115] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    3.600693] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    3.608106] hub 1-0:1.0: USB hub found
[    3.612026] hub 1-0:1.0: 1 port detected
[    3.616819] hub 2-0:1.0: USB hub found
[    3.620726] hub 2-0:1.0: 4 ports detected
[    3.875902] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.008123] usb 1-1: device descriptor read/64, error -71
[    4.256088] usb 1-1: device descriptor read/64, error -71
[    4.495882] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[    4.628111] usb 1-1: device descriptor read/64, error -71
[    4.872083] usb 1-1: device descriptor read/64, error -71
[    5.407888] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[    6.023964] xhci_hcd 0000:01:00.0: Setup ERROR: setup address command for slot 1.
[    6.239977] xhci_hcd 0000:01:00.0: Setup ERROR: setup address command for slot 1.

This patch allows matching any address for the pci node, thus working
with both legacy and new device trees.

[1] https://lore.kernel.org/all/20210831125843.1233488-1-nsaenzju@redhat.com/

Fixes: efff29cdcdb7 ("Platform/RaspberryPi: Always use non translating DMA in DT mode")
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Adrien Thierry 1 年之前
父节点
当前提交
ad00518399
共有 1 个文件被更改,包括 3 次插入3 次删除
  1. 3 3
      Platform/RaspberryPi/Drivers/FdtDxe/FdtDxe.c

+ 3 - 3
Platform/RaspberryPi/Drivers/FdtDxe/FdtDxe.c

@@ -388,14 +388,14 @@ SyncPcie (
    * triggering the mailbox by removing the node.
    */
 
-  Node = fdt_path_offset (mFdtImage, "/scb/pcie@7d500000/pci@1,0");
+  Node = fdt_path_offset (mFdtImage, "/scb/pcie@7d500000/pci");
   if (Node < 0) {
     // This can happen on CM4/etc which doesn't have an onboard XHCI
-    DEBUG ((DEBUG_INFO, "%a: failed to locate /scb/pcie@7d500000/pci@1/usb@1\n", __FUNCTION__));
+    DEBUG ((DEBUG_INFO, "%a: failed to locate /scb/pcie@7d500000/pci\n", __FUNCTION__));
   } else {
     Retval = fdt_del_node (mFdtImage, Node);
     if (Retval != 0) {
-      DEBUG ((DEBUG_ERROR, "Failed to remove /scb/pcie@7d500000/pci@1/usb@1\n"));
+      DEBUG ((DEBUG_ERROR, "Failed to remove /scb/pcie@7d500000/pci\n"));
       return EFI_NOT_FOUND;
     }
   }