Преглед изворни кода

Platform/RaspberryPi: Invert default Arasan, eMMC2 routing

In order for the WiFi to work, and the SD to run at full
speed we need to bind the SD slot to the eMMC2 controller.

Since we now have a driver for the eMMC2 controller
there isn't any reason to leave the SD card bound
to the older Arasan controller.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
Jeremy Linton пре 3 година
родитељ
комит
2cad1bd782
2 измењених фајлова са 2 додато и 2 уклоњено
  1. 1 1
      Platform/RaspberryPi/RPi4/RPi4.dsc
  2. 1 1
      Platform/RaspberryPi/RPi4/Readme.md

+ 1 - 1
Platform/RaspberryPi/RPi4/RPi4.dsc

@@ -475,7 +475,7 @@
   # SD-related.
   #
 
-  gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|L"SdIsArasan"|gConfigDxeFormSetGuid|0x0|1
+  gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|L"SdIsArasan"|gConfigDxeFormSetGuid|0x0|0
   gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|L"MmcForce1Bit"|gConfigDxeFormSetGuid|0x0|0
   gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|L"MmcForceDefaultSpeed"|gConfigDxeFormSetGuid|0x0|0
   gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|L"MmcSdDefaultSpeedMHz"|gConfigDxeFormSetGuid|0x0|25

+ 1 - 1
Platform/RaspberryPi/RPi4/Readme.md

@@ -181,7 +181,7 @@ Limit RAM to 3 GB            | `RamLimitTo3GB` | Disable = `0x00000000` <br> Ena
 System Table Selection       | `SystemTableMode`| ACPI = `0x00000000` (default)<br> ACPI + Devicetree = `0x00000001` <br> Devicetree = `0x00000002`
 Asset Tag                    | `AssetTag` | String, 32 characters or less (e.g. `L"ABCD123"`)<br> (default `L""`)
 **SD/MMC Configuration**     |
-uSD/eMMC Routing             | `SdIsArasan` | Arasan SDHC = `0x00000001` (default) <br> eMMC2 SDHCI = `0x00000000`
+uSD/eMMC Routing             | `SdIsArasan` | Arasan SDHC = `0x00000001` <br> eMMC2 SDHCI = `0x00000000` (default)
 Multi-Block Support          | `MmcDisableMulti` | Multi-block transfers = `0x00000000` (default)<br> Single block transfers = `0x00000001`
 uSD Max Bus Width            | `MmcForce1Bit` | 4-bit Mode = `0x00000000`  (default)<br> 1-bit Mode = `0x00000001`
 uSD Force Default Speed      | `MmcForceDefaultSpeed` | Allow High Speed = `0x00000000` (default)<br> Force Default Speed = `0x00000001`