|
@@ -19,11 +19,11 @@
|
|
|
/ {
|
|
|
model = "AMD Seattle (Rev.B) Development Board (Overdrive)";
|
|
|
compatible = "amd,seattle-overdrive", "amd,seattle";
|
|
|
- interrupt-parent = <0x1>;
|
|
|
+ interrupt-parent = <&gic>;
|
|
|
#address-cells = <0x2>;
|
|
|
#size-cells = <0x2>;
|
|
|
|
|
|
- interrupt-controller@e1101000 {
|
|
|
+ gic: interrupt-controller@e1101000 {
|
|
|
compatible = "arm,gic-400", "arm,cortex-a15-gic";
|
|
|
interrupt-controller;
|
|
|
#interrupt-cells = <0x3>;
|
|
@@ -35,15 +35,11 @@
|
|
|
<0x0 0xe1160000 0x0 0x2000>;
|
|
|
interrupts = <0x1 0x9 0xf04>;
|
|
|
ranges = <0x0 0x0 0x0 0xe1100000 0x0 0x100000>;
|
|
|
- linux,phandle = <0x1>;
|
|
|
- phandle = <0x1>;
|
|
|
|
|
|
- v2m@e0080000 {
|
|
|
+ msi: v2m@e0080000 {
|
|
|
compatible = "arm,gic-v2m-frame";
|
|
|
msi-controller;
|
|
|
reg = <0x0 0x80000 0x0 0x1000>;
|
|
|
- linux,phandle = <0x4>;
|
|
|
- phandle = <0x4>;
|
|
|
};
|
|
|
};
|
|
|
|
|
@@ -67,59 +63,25 @@
|
|
|
*/
|
|
|
dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
|
|
|
|
|
|
- clk100mhz_0 {
|
|
|
- compatible = "fixed-clock";
|
|
|
- #clock-cells = <0x0>;
|
|
|
- clock-frequency = <100000000>;
|
|
|
- clock-output-names = "adl3clk_100mhz";
|
|
|
- };
|
|
|
-
|
|
|
- clk375mhz {
|
|
|
- compatible = "fixed-clock";
|
|
|
- #clock-cells = <0x0>;
|
|
|
- clock-frequency = <375000000>;
|
|
|
- clock-output-names = "ccpclk_375mhz";
|
|
|
- };
|
|
|
-
|
|
|
- clk333mhz {
|
|
|
+ sata_clk: clk333mhz {
|
|
|
compatible = "fixed-clock";
|
|
|
#clock-cells = <0x0>;
|
|
|
clock-frequency = <333000000>;
|
|
|
clock-output-names = "sataclk_333mhz";
|
|
|
- linux,phandle = <0x2>;
|
|
|
- phandle = <0x2>;
|
|
|
};
|
|
|
|
|
|
- clk500mhz_0 {
|
|
|
- compatible = "fixed-clock";
|
|
|
- #clock-cells = <0x0>;
|
|
|
- clock-frequency = <500000000>;
|
|
|
- clock-output-names = "pcieclk_500mhz";
|
|
|
- };
|
|
|
-
|
|
|
- clk500mhz_1 {
|
|
|
- compatible = "fixed-clock";
|
|
|
- #clock-cells = <0x0>;
|
|
|
- clock-frequency = <500000000>;
|
|
|
- clock-output-names = "dmaclk_500mhz";
|
|
|
- };
|
|
|
-
|
|
|
- clk250mhz_4 {
|
|
|
+ i2c_clk: clk250mhz_4 {
|
|
|
compatible = "fixed-clock";
|
|
|
#clock-cells = <0x0>;
|
|
|
clock-frequency = <250000000>;
|
|
|
clock-output-names = "miscclk_250mhz";
|
|
|
- linux,phandle = <0xd>;
|
|
|
- phandle = <0xd>;
|
|
|
};
|
|
|
|
|
|
- clk100mhz_1 {
|
|
|
+ apb_clk: clk100mhz_1 {
|
|
|
compatible = "fixed-clock";
|
|
|
#clock-cells = <0x0>;
|
|
|
clock-frequency = <100000000>;
|
|
|
clock-output-names = "uartspiclk_100mhz";
|
|
|
- linux,phandle = <0x3>;
|
|
|
- phandle = <0x3>;
|
|
|
};
|
|
|
|
|
|
sata0_smmu: smmu@e0200000 {
|
|
@@ -152,7 +114,7 @@
|
|
|
compatible = "snps,dwc-ahci";
|
|
|
reg = <0x0 0xe0300000 0x0 0xf0000>;
|
|
|
interrupts = <0x0 0x163 0x4>;
|
|
|
- clocks = <0x2>;
|
|
|
+ clocks = <&sata_clk>;
|
|
|
dma-coherent;
|
|
|
iommus = <&sata0_smmu 0x00 0x1f>; /* 0-31 */
|
|
|
};
|
|
@@ -162,7 +124,7 @@
|
|
|
compatible = "snps,dwc-ahci";
|
|
|
reg = <0x0 0xe0d00000 0x0 0xf0000>;
|
|
|
interrupts = <0x0 0x162 0x4>;
|
|
|
- clocks = <0x2>;
|
|
|
+ clocks = <&sata_clk>;
|
|
|
dma-coherent;
|
|
|
iommus = <&sata1_smmu 0x00 0x1f>; /* 0-31 */
|
|
|
};
|
|
@@ -171,21 +133,21 @@
|
|
|
compatible = "snps,designware-i2c";
|
|
|
reg = <0x0 0xe1000000 0x0 0x1000>;
|
|
|
interrupts = <0x0 0x165 0x4>;
|
|
|
- clocks = <0xd>;
|
|
|
+ clocks = <&i2c_clk>;
|
|
|
};
|
|
|
|
|
|
i2c@e0050000 {
|
|
|
compatible = "snps,designware-i2c";
|
|
|
reg = <0x0 0xe0050000 0x0 0x1000>;
|
|
|
interrupts = <0x0 0x154 0x4>;
|
|
|
- clocks = <0xd>;
|
|
|
+ clocks = <&i2c_clk>;
|
|
|
};
|
|
|
|
|
|
serial@e1010000 {
|
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
|
reg = <0x0 0xe1010000 0x0 0x1000>;
|
|
|
interrupts = <0x0 0x148 0x4>;
|
|
|
- clocks = <0x3 0x3>;
|
|
|
+ clocks = <&apb_clk &apb_clk>;
|
|
|
clock-names = "uartclk", "apb_pclk";
|
|
|
};
|
|
|
|
|
@@ -194,7 +156,7 @@
|
|
|
reg = <0x0 0xe1020000 0x0 0x1000>;
|
|
|
spi-controller;
|
|
|
interrupts = <0x0 0x14a 0x4>;
|
|
|
- clocks = <0x3>;
|
|
|
+ clocks = <&apb_clk>;
|
|
|
clock-names = "apb_pclk";
|
|
|
};
|
|
|
|
|
@@ -203,7 +165,7 @@
|
|
|
reg = <0x0 0xe1030000 0x0 0x1000>;
|
|
|
spi-controller;
|
|
|
interrupts = <0x0 0x149 0x4>;
|
|
|
- clocks = <0x3>;
|
|
|
+ clocks = <&apb_clk>;
|
|
|
clock-names = "apb_pclk";
|
|
|
num-cs = <0x1>;
|
|
|
#address-cells = <0x1>;
|
|
@@ -230,7 +192,7 @@
|
|
|
interrupt-controller;
|
|
|
#interrupt-cells = <0x2>;
|
|
|
interrupts = <0x0 0x166 0x4>;
|
|
|
- clocks = <0x3>;
|
|
|
+ clocks = <&apb_clk>;
|
|
|
clock-names = "apb_pclk";
|
|
|
};
|
|
|
|
|
@@ -243,7 +205,7 @@
|
|
|
interrupt-controller;
|
|
|
#interrupt-cells = <0x2>;
|
|
|
interrupts = <0x0 0x16e 0x4>;
|
|
|
- clocks = <0x3>;
|
|
|
+ clocks = <&apb_clk>;
|
|
|
clock-names = "apb_pclk";
|
|
|
};
|
|
|
|
|
@@ -256,7 +218,7 @@
|
|
|
interrupt-controller;
|
|
|
#interrupt-cells = <0x2>;
|
|
|
interrupts = <0x0 0x16d 0x4>;
|
|
|
- clocks = <0x3>;
|
|
|
+ clocks = <&apb_clk>;
|
|
|
clock-names = "apb_pclk";
|
|
|
};
|
|
|
|
|
@@ -268,7 +230,7 @@
|
|
|
interrupt-controller;
|
|
|
#interrupt-cells = <0x2>;
|
|
|
interrupts = <0x0 0x169 0x4>;
|
|
|
- clocks = <0x3>;
|
|
|
+ clocks = <&apb_clk>;
|
|
|
clock-names = "apb_pclk";
|
|
|
};
|
|
|
|
|
@@ -288,23 +250,23 @@
|
|
|
iommu-map = <0x0 &pcie_smmu 0x0 0x10000>;
|
|
|
device_type = "pci";
|
|
|
bus-range = <0x0 0x7f>;
|
|
|
- msi-parent = <0x4>;
|
|
|
+ msi-parent = <&msi>;
|
|
|
reg = <0x0 0xf0000000 0x0 0x10000000>;
|
|
|
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
|
|
|
- interrupt-map = <0x1100 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x120 0x1>,
|
|
|
- <0x1100 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x121 0x1>,
|
|
|
- <0x1100 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x122 0x1>,
|
|
|
- <0x1100 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x123 0x1>,
|
|
|
-
|
|
|
- <0x1200 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x124 0x1>,
|
|
|
- <0x1200 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x125 0x1>,
|
|
|
- <0x1200 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x126 0x1>,
|
|
|
- <0x1200 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x127 0x1>,
|
|
|
-
|
|
|
- <0x1300 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x128 0x1>,
|
|
|
- <0x1300 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x129 0x1>,
|
|
|
- <0x1300 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x12a 0x1>,
|
|
|
- <0x1300 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x12b 0x1>;
|
|
|
+ interrupt-map = <0x1100 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x120 0x1>,
|
|
|
+ <0x1100 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x121 0x1>,
|
|
|
+ <0x1100 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x122 0x1>,
|
|
|
+ <0x1100 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x123 0x1>,
|
|
|
+
|
|
|
+ <0x1200 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x124 0x1>,
|
|
|
+ <0x1200 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x125 0x1>,
|
|
|
+ <0x1200 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x126 0x1>,
|
|
|
+ <0x1200 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x127 0x1>,
|
|
|
+
|
|
|
+ <0x1300 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x128 0x1>,
|
|
|
+ <0x1300 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x129 0x1>,
|
|
|
+ <0x1300 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12a 0x1>,
|
|
|
+ <0x1300 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x12b 0x1>;
|
|
|
dma-coherent;
|
|
|
dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
|
|
|
ranges = <0x1000000 0x0 0x00000000 0x0 0xefff0000 0x00 0x00010000>, /* I/O Memory (size=64K) */
|
|
@@ -352,43 +314,35 @@
|
|
|
reg-spacing = <4>;
|
|
|
};
|
|
|
|
|
|
- clk250mhz_0 {
|
|
|
+ xgmacclk0_dma: clk250mhz_0 {
|
|
|
compatible = "fixed-clock";
|
|
|
#clock-cells = <0x0>;
|
|
|
clock-frequency = <250000000>;
|
|
|
clock-output-names = "xgmacclk0_dma_250mhz";
|
|
|
- linux,phandle = <0x5>;
|
|
|
- phandle = <0x5>;
|
|
|
};
|
|
|
|
|
|
- clk250mhz_1 {
|
|
|
+ xgmacclk0_ptp: clk250mhz_1 {
|
|
|
compatible = "fixed-clock";
|
|
|
#clock-cells = <0x0>;
|
|
|
clock-frequency = <250000000>;
|
|
|
clock-output-names = "xgmacclk0_ptp_250mhz";
|
|
|
- linux,phandle = <0x6>;
|
|
|
- phandle = <0x6>;
|
|
|
};
|
|
|
|
|
|
- clk250mhz_2 {
|
|
|
+ xgmacclk1_dma: clk250mhz_2 {
|
|
|
compatible = "fixed-clock";
|
|
|
#clock-cells = <0x0>;
|
|
|
clock-frequency = <250000000>;
|
|
|
clock-output-names = "xgmacclk1_dma_250mhz";
|
|
|
- linux,phandle = <0x7>;
|
|
|
- phandle = <0x7>;
|
|
|
};
|
|
|
|
|
|
- clk250mhz_3 {
|
|
|
+ xgmacclk1_ptp: clk250mhz_3 {
|
|
|
compatible = "fixed-clock";
|
|
|
#clock-cells = <0x0>;
|
|
|
clock-frequency = <250000000>;
|
|
|
clock-output-names = "xgmacclk1_ptp_250mhz";
|
|
|
- linux,phandle = <0x8>;
|
|
|
- phandle = <0x8>;
|
|
|
};
|
|
|
|
|
|
- phy@e1240800 {
|
|
|
+ xgmac0_phy: phy@e1240800 {
|
|
|
status = "disabled";
|
|
|
compatible = "amd,xgbe-phy-seattle-v1a";
|
|
|
reg = <0x0 0xe1240800 0x0 0x0400>, /* SERDES RX/TX0 */
|
|
@@ -402,11 +356,9 @@
|
|
|
amd,serdes-tx-amp = <0xf 0xf 0xa>;
|
|
|
amd,serdes-dfe-tap-config = <0x3 0x3 0x1>;
|
|
|
amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>;
|
|
|
- linux,phandle = <0x9>;
|
|
|
- phandle = <0x9>;
|
|
|
};
|
|
|
|
|
|
- phy@e1240c00 {
|
|
|
+ xgmac1_phy: phy@e1240c00 {
|
|
|
status = "disabled";
|
|
|
compatible = "amd,xgbe-phy-seattle-v1a";
|
|
|
reg = <0x0 0xe1240c00 0x0 0x0400>, /* SERDES RX/TX0 */
|
|
@@ -420,8 +372,6 @@
|
|
|
amd,serdes-tx-amp = <0xf 0xf 0xa>;
|
|
|
amd,serdes-dfe-tap-config = <0x3 0x3 0x1>;
|
|
|
amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>;
|
|
|
- linux,phandle = <0xa>;
|
|
|
- phandle = <0xa>;
|
|
|
};
|
|
|
|
|
|
xgmac0_smmu: smmu@e0600000 {
|
|
@@ -461,14 +411,12 @@
|
|
|
<0x0 0x15d 0x1>;
|
|
|
amd,per-channel-interrupt;
|
|
|
mac-address = [02 a1 a2 a3 a4 a5];
|
|
|
- clocks = <0x5 0x6>;
|
|
|
+ clocks = <&xgmacclk0_dma &xgmacclk0_ptp>;
|
|
|
clock-names = "dma_clk", "ptp_clk";
|
|
|
- phy-handle = <0x9>;
|
|
|
+ phy-handle = <&xgmac0_phy>;
|
|
|
phy-mode = "xgmii";
|
|
|
dma-coherent;
|
|
|
iommus = <&xgmac0_smmu 0x00 0x1f>; /* 0-31 */
|
|
|
- linux,phandle = <0xb>;
|
|
|
- phandle = <0xb>;
|
|
|
};
|
|
|
|
|
|
xgmac@e0900000 {
|
|
@@ -482,25 +430,17 @@
|
|
|
<0x0 0x158 0x1>;
|
|
|
amd,per-channel-interrupt;
|
|
|
mac-address = [02 b1 b2 b3 b4 b5];
|
|
|
- clocks = <0x7 0x8>;
|
|
|
+ clocks = <&xgmacclk1_dma &xgmacclk1_ptp>;
|
|
|
clock-names = "dma_clk", "ptp_clk";
|
|
|
- phy-handle = <0xa>;
|
|
|
+ phy-handle = <&xgmac1_phy>;
|
|
|
phy-mode = "xgmii";
|
|
|
dma-coherent;
|
|
|
iommus = <&xgmac1_smmu 0x00 0x1f>; /* 0-31 */
|
|
|
- linux,phandle = <0xc>;
|
|
|
- phandle = <0xc>;
|
|
|
};
|
|
|
};
|
|
|
|
|
|
chosen {
|
|
|
stdout-path = "/smb/serial@e1010000";
|
|
|
- /* Note:
|
|
|
- * Linux support for pci-probe-only DT is not
|
|
|
- * stable. Disable this for now and let Linux
|
|
|
- * take care of the resource assignment.
|
|
|
- */
|
|
|
- // linux,pci-probe-only;
|
|
|
};
|
|
|
|
|
|
psci {
|