封欢 1278ddf908 init buildroot source преди 3 години
..
readme.txt 1278ddf908 init buildroot source преди 3 години

readme.txt

Arcturus uCP1020 SoM
====================

This tutorial describes how to use the predefined Buildroot
configuration for the Arcturus uCP1020 SoM platform.

Additional information about this module can be found at


Building
--------

make arcturus_ucp1020_defconfig
make

Result of the build
-------------------

After building, you should obtain this tree:

output/images/
+-- rootfs.jffs2
+-- rootfs.tar
+-- u-boot.bin
+-- ucp1020.dtb
+-- uImage

Flashing
--------

You'll need to program the files created by buildroot into the NOR flash.

1. Program the new U-Boot binary (optional)
If you don't feel confident upgrading your bootloader then don't do it,
it's unnecessary most of the time.

B$ tftp u-boot.bin
B$ protect off 0xeff80000 +$filesize
B$ erase 0xeff80000 +$filesize
B$ cp.b $loadaddr 0xeff80000 $filesize
B$ protect on 0xeff80000 +$filesize

2. Program the kernel

B$ tftp uImage
B$ erase 0xec140000 +$filesize
B$ cp.b $loadaddr 0xec140000 $filesize

3. Program the DTB

B$ tftp ucp1020.dtb
B$ erase 0xec100000 +$filesize
B$ cp.b $loadaddr 0xec100000 $filesize

4. Program the jffs2 root filesystem

B$ tftp rootfs.jffs2
B$ erase 0xec800000 0xee8fffff
B$ cp.b $loadaddr 0xec800000 $filesize

5. Booting your new system

B$ setenv norboot 'setenv bootargs root=/dev/mtdblock1 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xec140000 - 0xec100000'

If you want to set this boot option as default:

B$ setenv bootcmd 'run norboot'
B$ saveenv

...or for a single boot:

B$ run norboot

Good Luck !