12345678910111213141516171819202122232425262728293031323334353637383940 |
- OMAP5432 uEVM
- =============
- This file documents the Buildroot support for the OMAP5432 uEVM[1], a
- single-board computer development platform based on the Texas Instruments
- OMAP5432 system on a chip (SoC).
- How to build
- ============
- $ make uevm5432_defconfig
- $ make
- How to write the SD card
- ========================
- Once the build process is finished you will have an image called "sdcard.img"
- in the output/images/ directory.
- Copy the bootable "sdcard.img" onto an SD card with "dd":
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sync
- Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX instead
- depending on setup).
- To boot from SD card, set the SYSBOOT switches S1 of your OMAP5432 uEVM to the
- following position:
- ON x x
- x x
- 1 2 3 4
- Insert the micro SDcard in your OMAP5432 uEVM, and power it up with the POWER
- ON push button switch S3. The console is on the micro USB Debug UART, with
- serial settings 115200 8N1. Refer also to the quick start guide[2].
- [1]: https://svtronics.com/5432
- [2]: https://www.ti.com/lit/ug/swcu131/swcu131.pdf
|