Intro ===== This directory contains a buildroot configuration for building a LicheePi Zero. How to build it =============== Configure Buildroot ------------------- $ make licheepi_zero_defconfig Build the rootfs ---------------- Note: you will need to have access to the network, since Buildroot will download the packages' sources. You may now build your rootfs with: $ make (This may take a while, consider getting yourself a coffee ;-) ) Result of the build ------------------- After building, you should obtain this tree: output/images/ +-- boot.scr +-- boot.vfat +-- rootfs.ext2 +-- rootfs.ext4 -> rootfs.ext2 +-- rootfs.tar +-- sdcard.img +-- sun8i-v3s-licheepi-zero-dock.dtb +-- sun8i-v3s-licheepi-zero.dtb +-- u-boot.bin +-- u-boot-sunxi-with-spl.bin `-- zImage How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX Alternatively, you can use the Etcher graphical tool to burn the image to the SD card safely and on any platform: https://etcher.io/ Once the SD card is burned, insert it into your LicheePi Zero board, and power it up. Your new system should come up now and start a console on the UART0 serial port.