1234567891011121314151617181920212223242526272829303132 |
- # This is the sample jh7110_uEnv.txt file for starfive visionfive U-boot
- # The current convention (SUBJECT TO CHANGE) is that this file
- # will be loaded from the third partition on the
- # MMC card.
- devnum=0
- partnum=3
- # The FIT file to boot from
- fitfile=starfiveu.fit
- # for debugging boot
- bootargs=earlyprintk console=tty1 console=ttyS0,115200 debug rootwait earlycon=sbi root=/dev/mmcblk0p4
- # for addr info
- fileaddr=0xa0000000
- fdtaddr=0x46000000
- # boot Linux flat or compressed 'Image' stored at 'kernel_addr_r'
- kernel_addr_r=0x40200000
- irdaddr=0x46100000
- irdsize=0x5f00000
- # Use the FDT in the FIT image..
- setupfdt1=fdt addr ${fdtaddr}
- setupird=setexpr irdend ${irdaddr} + ${irdsize}; fdt set /chosen linux,initrd-start <0x0 0x${irdaddr}>; fdt set /chosen linux,initrd-end <0x0 0x${irdend}>
- setupfdt2=fdt print /chosen; fdt set /chosen bootargs "${bootargs}"; fdt print /chosen
- bootwait=setenv _delay ${bootdelay}; echo ${_delay}; while test ${_delay} > 0; do sleep 1; setexpr _delay ${_delay} - 1; echo ${_delay}; done
- boot2=fatload mmc ${devnum}:${partnum} ${fileaddr} ${fitfile}; bootm start ${fileaddr}; run setupfdt1;run setupird;run setupfdt2; bootm loados ${fileaddr}; run chipa_set_linux; run cpu_vol_set; echo "Booting kernel in"; booti ${kernel_addr_r} ${irdaddr}:${filesize} ${fdtaddr}
|