mlt 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 14 years ago
..
3780i.c 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
3780i.h 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
Makefile 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
README 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
mwavedd.c 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
mwavedd.h 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
mwavepub.h 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
smapi.c 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
smapi.h 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
tp3780i.c 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago
tp3780i.h 76f20f4d40 Creation of Cybook 2416 (actually Gen4) repository 2 years ago

README

Module options
--------------

The mwave module takes the following options. Note that these options
are not saved by the BIOS and so do not persist after unload and reload.

mwave_debug=value, where value is bitwise OR of trace flags:
0x0001 mwavedd api tracing
0x0002 smapi api tracing
0x0004 3780i tracing
0x0008 tp3780i tracing

Tracing only occurs if the driver has been compiled with the
MW_TRACE macro #defined (i.e. let EXTRA_CFLAGS += -DMW_TRACE
in the Makefile).

mwave_3780i_irq=5/7/10/11/15
If the dsp irq has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
irq used by the dsp to be configured.

mwave_3780i_io=0x130/0x350/0x0070/0xDB0
If the dsp io range has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
io range used by the dsp to be configured.

mwave_uart_irq=3/4
If the mwave's uart irq has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
irq used by the mwave uart to be configured.

mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
If the uart io range has not been setup and stored in bios by the
thinkpad configuration utility then this parameter allows the
io range used by the mwave uart to be configured.

Example to enable the 3780i DSP using ttyS1 resources:

insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8

Accessing the driver
--------------------

You must also create a node for the driver:
mkdir -p /dev/modems
mknod --mode=660 /dev/modems/mwave c 10 219