123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310 |
- // Do not use the code from u8g2 submodule and skip the complete source here
- // if the u8g2 module is not selected.
- // Reason: The whole u8g2 submodule code tree might not even exist in this case.
- #include "user_modules.h"
- #ifdef LUA_USE_MODULES_U8G2
- #include <string.h>
- #include <stdlib.h>
- #include "platform.h"
- #include "user_interface.h"
- #define U8X8_USE_PINS
- #define U8X8_WITH_USER_PTR
- #include "u8x8_nodemcu_hal.h"
- // static variables containing info about the i2c link
- // TODO: move to user space in u8x8_t once available
- typedef struct {
- uint8_t id;
- } hal_i2c_t;
- // static variables containing info about the spi link
- // TODO: move to user space in u8x8_t once available
- typedef struct {
- uint8_t host;
- //spi_device_handle_t device;
- uint8_t last_dc;
- struct {
- uint8_t *data;
- size_t size, used;
- } buffer;
- } hal_spi_t;
- static void flush_buffer_spi( hal_spi_t *hal )
- {
- if (hal->buffer.data && hal->buffer.used > 0) {
- platform_spi_blkwrite( hal->host, hal->buffer.used, hal->buffer.data );
- hal->buffer.used = 0;
- }
- }
- static void force_flush_buffer(u8x8_t *u8x8)
- {
- // spi hal has a buffer that can be flushed
- if (u8x8->byte_cb == u8x8_byte_nodemcu_spi) {
- hal_spi_t *hal = u8x8->user_ptr;
- flush_buffer_spi( hal );
- }
- }
- uint8_t u8x8_gpio_and_delay_nodemcu(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
- {
- uint32_t temp;
- switch(msg)
- {
- case U8X8_MSG_GPIO_AND_DELAY_INIT: // called once during init phase of u8g2/u8x8
- // can be used to setup pins
- for (int idx = 0; idx < U8X8_PIN_OUTPUT_CNT; idx++) {
- if (u8x8->pins[idx] != U8X8_PIN_NONE) {
- // configure pin as output
- if (idx == U8X8_PIN_I2C_CLOCK || idx == U8X8_PIN_I2C_DATA) {
- platform_gpio_mode( u8x8->pins[idx], PLATFORM_GPIO_OPENDRAIN, PLATFORM_GPIO_PULLUP );
- } else {
- platform_gpio_mode( u8x8->pins[idx], PLATFORM_GPIO_OUTPUT, PLATFORM_GPIO_FLOAT );
- }
- }
- }
- break;
- case U8X8_MSG_DELAY_NANO: // delay arg_int * 1 nano second
- force_flush_buffer(u8x8);
- os_delay_us( 1 );
- break;
- case U8X8_MSG_DELAY_100NANO: // delay arg_int * 100 nano seconds
- force_flush_buffer(u8x8);
- temp = arg_int * 100;
- temp /= 1000;
- os_delay_us( temp > 0 ? temp : 1 );
- break;
- case U8X8_MSG_DELAY_10MICRO: // delay arg_int * 10 micro seconds
- force_flush_buffer(u8x8);
- os_delay_us( arg_int * 10 );
- break;
- case U8X8_MSG_DELAY_MILLI: // delay arg_int * 1 milli second
- force_flush_buffer(u8x8);
- os_delay_us( arg_int * 1000 );
- system_soft_wdt_feed();
- break;
- case U8X8_MSG_DELAY_I2C: // arg_int is the I2C speed in 100KHz, e.g. 4 = 400 KHz
- force_flush_buffer(u8x8);
- temp = 5000 / arg_int; // arg_int=1: delay by 5us, arg_int = 4: delay by 1.25us
- temp /= 1000;
- os_delay_us( temp > 0 ? temp : 1 );
- break;
- case U8X8_MSG_GPIO_D0: // D0 or SPI clock pin: Output level in arg_int
- //case U8X8_MSG_GPIO_SPI_CLOCK:
- break;
- case U8X8_MSG_GPIO_D1: // D1 or SPI data pin: Output level in arg_int
- //case U8X8_MSG_GPIO_SPI_DATA:
- break;
- case U8X8_MSG_GPIO_D2: // D2 pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_D3: // D3 pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_D4: // D4 pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_D5: // D5 pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_D6: // D6 pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_D7: // D7 pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_E: // E/WR pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_CS: // CS (chip select) pin: Output level in arg_int
- platform_gpio_write( u8x8_GetPinValue( u8x8, msg ), arg_int );
- break;
- case U8X8_MSG_GPIO_DC: // DC (data/cmd, A0, register select) pin: Output level in arg_int
- platform_gpio_write( u8x8_GetPinValue( u8x8, msg ), arg_int );
- break;
- case U8X8_MSG_GPIO_RESET: // Reset pin: Output level in arg_int
- if (u8x8_GetPinValue( u8x8, msg ) != U8X8_PIN_NONE)
- platform_gpio_write( u8x8_GetPinValue(u8x8, msg), arg_int );
- break;
- case U8X8_MSG_GPIO_CS1: // CS1 (chip select) pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_CS2: // CS2 (chip select) pin: Output level in arg_int
- break;
- case U8X8_MSG_GPIO_I2C_CLOCK: // arg_int=0: Output low at I2C clock pin
- // arg_int=1: Input dir with pullup high for I2C clock pin
- // for SW comm routine
- platform_gpio_write( u8x8_GetPinValue( u8x8, msg ), arg_int );
- break;
- case U8X8_MSG_GPIO_I2C_DATA: // arg_int=0: Output low at I2C data pin
- // arg_int=1: Input dir with pullup high for I2C data pin
- // for SW comm routine
- platform_gpio_write( u8x8_GetPinValue( u8x8, msg ), arg_int );
- break;
- case U8X8_MSG_GPIO_MENU_SELECT:
- case U8X8_MSG_GPIO_MENU_NEXT:
- case U8X8_MSG_GPIO_MENU_PREV:
- case U8X8_MSG_GPIO_MENU_HOME:
- u8x8_SetGPIOResult( u8x8, /* get menu select pin state */ 0 );
- break;
- default:
- u8x8_SetGPIOResult( u8x8, 1 ); // default return value
- break;
- }
- return 1;
- }
- uint8_t u8x8_byte_nodemcu_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
- {
- uint8_t *data;
- hal_i2c_t *hal = u8x8->user_ptr;
- switch(msg) {
- case U8X8_MSG_BYTE_SEND:
- if (hal->id < NUM_I2C) {
- data = (uint8_t *)arg_ptr;
- while( arg_int > 0 ) {
- platform_i2c_send_byte( hal->id, *data );
- data++;
- arg_int--;
- }
- } else {
- // invalid id
- return 0;
- }
- break;
- case U8X8_MSG_BYTE_INIT:
- {
- // the user pointer initially contains the i2c id
- int id = (int)hal;
- if (!(hal = malloc( sizeof ( hal_i2c_t ) )))
- return 0;
- hal->id = id;
- u8x8->user_ptr = hal;
- }
- break;
- case U8X8_MSG_BYTE_SET_DC:
- break;
- case U8X8_MSG_BYTE_START_TRANSFER:
- if (hal->id < NUM_I2C) {
- platform_i2c_send_start( hal->id );
- platform_i2c_send_address( hal->id, u8x8_GetI2CAddress(u8x8), PLATFORM_I2C_DIRECTION_TRANSMITTER );
- } else {
- // invalid id
- return 0;
- }
- break;
- case U8X8_MSG_BYTE_END_TRANSFER:
- if (hal->id < NUM_I2C) {
- platform_i2c_send_stop( hal->id );
- } else {
- // invalid id
- return 0;
- }
- break;
- default:
- return 0;
- }
- return 1;
- }
- uint8_t u8x8_byte_nodemcu_spi(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
- {
- hal_spi_t *hal = u8x8->user_ptr;
- switch(msg) {
- case U8X8_MSG_BYTE_INIT:
- {
- /* disable chipselect */
- u8x8_gpio_SetCS( u8x8, u8x8->display_info->chip_disable_level );
- // the user pointer initially contains the spi host id
- int host = (int)hal;
- if (!(hal = malloc( sizeof ( hal_spi_t ) )))
- return 0;
- hal->host = host;
- u8x8->user_ptr = hal;
- hal->buffer.data = NULL;
- hal->last_dc = 0;
- }
- break;
- case U8X8_MSG_BYTE_SET_DC:
- if (hal->last_dc != arg_int)
- flush_buffer_spi( hal );
- u8x8_gpio_SetDC( u8x8, arg_int );
- hal->last_dc = arg_int;
- break;
- case U8X8_MSG_BYTE_START_TRANSFER:
- hal->buffer.size = 256;
- if (!(hal->buffer.data = (uint8_t *)malloc( hal->buffer.size )))
- return 0;
- hal->buffer.used = 0;
- u8x8_gpio_SetCS( u8x8, u8x8->display_info->chip_enable_level );
- break;
- case U8X8_MSG_BYTE_SEND:
- if (!hal->buffer.data)
- return 0;
- while (hal->buffer.size - hal->buffer.used < arg_int) {
- hal->buffer.size *= 2;
- uint8_t *tmp;
- if (!(tmp = (uint8_t *)malloc( hal->buffer.size ))) {
- free( hal->buffer.data );
- hal->buffer.data = NULL;
- return 0;
- }
- os_memcpy( tmp, hal->buffer.data, hal->buffer.used );
- free( hal->buffer.data );
- hal->buffer.data = tmp;
- }
- os_memcpy( hal->buffer.data + hal->buffer.used, arg_ptr, arg_int );
- hal->buffer.used += arg_int;
- break;
- case U8X8_MSG_BYTE_END_TRANSFER:
- if (!hal->buffer.data)
- return 0;
- flush_buffer_spi( hal );
- u8x8_gpio_SetCS( u8x8, u8x8->display_info->chip_disable_level );
- free( hal->buffer.data );
- hal->buffer.data = NULL;
- break;
- default:
- return 0;
- }
- return 1;
- }
- #endif /* LUA_USE_MODULES_U8G2 */
|