123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263 |
- Summary
- =======
- This README is about U-Boot support for SAMSUNG's/NEXELL's ARM Cortex-A9 based
- S5P4418 SoC. It is based on FriendlyARM's U-Boot v2016.01 for the NanoPi2
- (and other) boards [1].
- Currently the following boards are supported:
- * FriendlyArm NanoPi2 [2]
- * FriendlyArm NanoPC-T2 [3]
- Build
- =====
- * NanoPi2 and NanoPC-T2
- make s5p4418_nanopi2_defconfig
- make
- Installation
- ============
- - Download Official-ROMs-SDCard-20190718.7z from [4] (images files for android,
- friendlyCore and LUbuntu)
- - Use s5p4418-sd-lubuntu-desktop-xenial-4.4-armhf-20190718.img to make a SD-card
- - Use dd in the directory where U-Boot has been built to update U-Boot:
- (replace <SD-card> with the device used for the SD-card, e.g. sdc)
- sudo dd seek=3841 if=u-boot.bin of=/dev/<SD-card>
- - Boot the board from this SD-card
- The source code for (the used?) LUbuntu 16.04 can be found at [5].
- Links
- =====
- [1] FriendlyArm U-boot v2016.01:
- https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01
- [2] NanoPi2:
- http://wiki.friendlyarm.com/wiki/index.php/NanoPi_2
- [3] NanoPC-T2:
- http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T2
- [4] FriendlyArm image files for NanoPi2:
- http://download.friendlyarm.com//NanoPi2
- [5] FriendlyArm LUbuntu 16.04 Source Code for NanoPi2:
- https://github.com/friendlyarm/linux/tree/nanopi2-v4.4.y
|